Introducció
The 3M Peltor P3EV/2 Cap/Hat Adapter (Model XA007704712) is designed to securely attach compatible 3M Peltor visors to various caps and hats, providing integrated head and face protection. This adapter ensures a stable and comfortable fit, allowing users to combine their preferred headwear with essential facial protection. Please read these instructions carefully before installation and use.
Image 1: The 3M Peltor P3EV/2 Cap/Hat Adapter components. These two pieces are designed to clip onto a cap or hat and then accept a compatible visor.
Configuració i instal·lació
Follow these steps to correctly install the 3M Peltor P3EV/2 Cap/Hat Adapter and attach a compatible visor.
- Inspeccionar components: Before installation, ensure all adapter components are present and free from damage.
- Attach Adapter to Headwear:
- Identify the attachment points on your cap or hat. The adapter is designed to clip onto the brim or side of compatible headwear.
- Align one adapter piece with an attachment point on your cap/hat.
- Press firmly until the adapter securely clips into place. Repeat for the second adapter piece on the opposite side. Ensure both adapters are symmetrical and firmly seated.
- Attach Visor to Adapter:
- Take your compatible 3M Peltor visor.
- Align the visor's attachment points with the slots on the installed cap/hat adapters.
- Gently push the visor into the adapter slots until it clicks securely into position. Verify that the visor is firmly attached and does not wobble.
- Comprovació final: Once installed, gently tug on the visor and adapters to confirm they are securely fastened to the headwear.
Instruccions de funcionament
Once the 3M Peltor P3EV/2 Cap/Hat Adapter and visor are installed, proper operation involves ensuring comfort and functionality.
- Positioning the Visor: The visor can typically be moved up and down. Adjust its position to provide optimal facial protection without obstructing vision.
- Confort i ajust: Ensure the cap/hat and attached visor assembly fit comfortably and securely on your head. The adapter should not cause pressure points or discomfort.
- Camp de visió: Confirm that your field of vision is clear and unobstructed when the visor is in the operational position.
Manteniment
Regular maintenance ensures the longevity and effectiveness of your 3M Peltor P3EV/2 Cap/Hat Adapter.
- Neteja: Clean the adapter with a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners, as these can damage the material. Rinse thoroughly and air dry.
- Inspecció: Periodically inspect the adapter for signs of wear, cracks, or damage. Pay close attention to the attachment clips and visor connection points.
- Emmagatzematge: Store the adapter and attached visor in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
- Substitució: If any part of the adapter shows signs of damage or excessive wear, replace the unit immediately to ensure continued protection.
Resolució de problemes
If you encounter issues with your 3M Peltor P3EV/2 Cap/Hat Adapter, refer to the following common solutions.
- Visor feels loose or wobbly:
- Ensure the visor is fully engaged in both adapter clips.
- Check if the adapter clips are securely fastened to the cap/hat.
- Inspect the adapter and visor for any damage that might prevent a secure fit.
- Adapter does not fit on cap/hat:
- Verify that your cap/hat is compatible with the 3M Peltor P3EV/2 adapter system.
- Ensure you are aligning the adapter correctly with the cap/hat's attachment points.
- Difficulty attaching visor to adapter:
- Confirm that the visor is a compatible 3M Peltor model designed for this adapter.
- Ensure the visor's attachment points are clean and free of debris.
- Apply gentle, even pressure to engage the visor into the adapter slots.
Especificacions
| Marca | 3M |
| Número de model | P3EV/2 (XA007704712) |
| Tipus de producte | Cap / Hat Adapter for Visor |
| Dimensions | 9 x 6.62 x 4.75 polzades (embalatge); 1.13 unces |
| Compatibilitat | Designed for use with compatible 3M Peltor visors and headwear. |
Informació de la garantia
Specific warranty details for the 3M Peltor P3EV/2 Cap/Hat Adapter are not provided within this document. For comprehensive warranty information, please refer to the official 3M website or contact 3M customer service directly. Keep your proof of purchase for any warranty claims.
Suport i Contacte
For further assistance, technical support, or inquiries regarding the 3M Peltor P3EV/2 Cap/Hat Adapter, please contact 3M customer service. Visit the official 3M weblloc web per obtenir dades de contacte i recursos addicionals sobre productes.
Recursos en línia: www.3m.com