Emtek 86133US10B EMT Wire Pull Instruction Manual

1. Introducció

This manual provides comprehensive instructions for the installation, maintenance, and care of your Emtek 86133US10B EMT Wire Pull. Please read these instructions carefully before beginning installation to ensure proper function and longevity of your product. Retain this manual for future reference.

2. Producte acabatview

The Emtek 86133US10B is a traditional brass wire cabinet pull designed for various cabinet and furniture applications. It features an Oil Rubbed Bronze finish and a 4-inch center-to-center (CTC) spacing for mounting screws.

Figura 1: Emtek 86133US10B EMT Wire Pull. This image displays the cabinet pull, highlighting its wire design and Oil Rubbed Bronze finish, suitable for traditional decor.

Característiques principals:

• Traditional Brass Wire Design: Offers a classic aesthetic.
• Acabat en bronze fregat amb oli: Provides a durable and attractive surface.
• 4-inch Center-to-Center (CTC): Standard spacing for easy installation on most cabinet doors and drawers.
• Construcció duradora: Made from quality brass and bronze materials.

3. Instruccions d'instal·lació

Before you begin, ensure you have the necessary tools: a drill, drill bits (appropriate size for mounting screws), a measuring tape, a pencil, and a screwdriver. The package includes the pull and mounting screws.

Passos:

1. Prepara la superfície: Identify the desired location for the pull on your cabinet door or drawer. Ensure the surface is clean and free of debris.
2. Marca els punts de perforació: Using a measuring tape and pencil, mark two points 4 inches apart (center-to-center) on the cabinet surface where the pull will be installed. Ensure these points are level and centered as desired.
3. Perforar forats pilot: Carefully drill pilot holes at the marked points. Use a drill bit slightly smaller than the diameter of the mounting screws to prevent splitting the wood. Drill straight through the cabinet material.
4. Attach the Pull: Align the Emtek Wire Pull with the drilled holes. Insert the provided screws from the inside of the cabinet door/drawer through the pilot holes and into the pull.
5. Secure the Pull: Using a screwdriver, tighten the screws until the pull is firmly attached. Do not overtighten, as this may strip the screws or damage the cabinet material.
6. Funcionalitat de prova: Gently pull on the installed handle to ensure it is secure and functions correctly.

Nota: If replacing an existing pull, ensure the new Emtek pull's 4-inch CTC spacing matches the existing holes. If not, new holes will need to be drilled, and old holes may need to be filled and finished.

4. Manteniment i cura

Proper care will help maintain the finish and functionality of your Emtek Wire Pull.

• Neteja: Clean the pull regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishing agents, as these can damage the Oil Rubbed Bronze finish.
• Eviteu la humitat: While durable, prolonged exposure to excessive moisture can affect the finish. Wipe dry any water splashes immediately.
• Comprovació periòdica: Periodically check the mounting screws for tightness. If the pull feels loose, gently tighten the screws with a screwdriver.

5. Solució De Problemes

6. Especificacions

7. Garantia i assistència

For specific warranty information and customer support regarding your Emtek 86133US10B EMT Wire Pull, please refer to the documentation included with your purchase or visit the official Emtek website. You may also contact Emtek customer service directly for assistance with product inquiries, parts, or warranty claims.