E8 E8-ASW400MM-Single

E8 400MM Stainless Automatic Gate Opener Instruction Manual

Model: E8-ASW400MM-Single

Producte acabatview

This manual provides essential information for the installation, operation, and maintenance of the E8 400MM Stainless Automatic Gate Opener. This system is designed for single swing gates up to 13 feet long and 600 pounds.

Les característiques clau inclouen:

Components inclosos

The E8 400MM Stainless Automatic Gate Opener package includes the following components:

E8 400MM Stainless Automatic Gate Opener Arm

Braç obridor de portes: The primary actuator for opening and closing the gate.

D1 Tauler de control

D1 Control Board: The electronic brain of the system, managing gate operations.

Transmissors remots

Remote Transmitters: Three units for wireless control of the gate opener.

Bateria de 12 V 7 Ah

Bateria de seguretat: A 7AH lead acid battery for continued operation during power outages.

Claus d'alliberament

Release Keys: For manual disengagement of the gate opener.

Suport de muntatge a la paret

Suport de muntatge a la paret: Used to secure the opener arm to the wall or post.

Suport de muntatge de porta

Gate Mounting Bracket: Used to secure the opener arm to the gate itself.

Configuració i instal·lació

Proper installation is crucial for the safe and efficient operation of your E8 gate opener. It is recommended that installation be performed by a qualified professional.

  1. Preparació del lloc: Ensure the gate structure is sound and moves freely without obstruction. Clear the area around the gate for installation.
  2. Suports de muntatge: Securely attach the primary wall bracket to a sturdy post or wall and the secondary gate bracket to the gate. Ensure correct alignment for the gate opener arm.
  3. Install Gate Opener Arm: Connect the 400MM operator arm to both the wall and gate mounting brackets using the provided hardware. Ensure the arm is level and moves freely.
  4. Control Box and Wiring: Mount the control box in a secure, weather-protected location near the gate. Connect the operator arm, transformer, and backup battery to the D1 Control Board inside the control box according to the wiring diagram.
  5. Connexió d'alimentació: Connect the 110AC-16VAC transformer to a suitable power source.
  6. Programació remota: Program the remote transmitter units with the receiver. Refer to the D1 Control Board manual for specific programming steps.
  7. Característiques de seguretat: Install any additional safety devices (e.g., photocells, safety edges) as required by local regulations and for enhanced safety.
  8. Prova: Thoroughly test the gate opener's operation, including opening, closing, auto-stop features, and manual release.

Nota: For detailed wiring diagrams and specific installation measurements, please refer to the comprehensive installation manual included in your package.

Instruccions de funcionament

The E8 Automatic Gate Opener is designed for user-friendly operation.

Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre obridor de portes.

Resolució de problemes

Abans de contactar amb el servei d'assistència, review aquests problemes i solucions comuns:

ProblemaCausa possibleSolució
La porta no respon al comandament a distància.Bateria del comandament a distància gastada, comandament a distància fora de l'abast, apagadatage, control board issue.Replace remote battery. Move closer to gate. Check power supply and circuit breaker. Consult control board manual for error codes.
Gate stops mid-cycle or reverses.Obstruction detected, safety sensor triggered, motor overload.Check for physical obstructions. Clean safety sensors. Reduce gate friction or weight if possible.
La porta funciona lentament.Vol de bateria baixatage, motor wear, excessive gate friction.Check backup battery charge. Lubricate gate hinges. Inspect motor for signs of wear.
Gate makes unusual noises.Lack of lubrication, loose hardware, worn components.Lubricate moving parts. Tighten all bolts and nuts. Inspect for damaged components.

Si aquestes solucions no resolen el problema, poseu-vos en contacte amb l'atenció al client.

Especificacions

CaracterísticaDetall
Número de modelE8-ASW400MM-Single
Capacitat de la portaUp to 13 feet long and 600 pounds (single swing gate)
Tipus d'instal·lacióCargol
MaterialAcer inoxidable
Pes de l'article41.5 lliures
Dimensions del paquet32 x 11 x 9 polzades
Font d'alimentacióAC/DC with Battery Backup
UPC799559026110

Informació de la garantia

The E8 400MM Stainless Automatic Gate Opener comes with a 1 anys de garantia del fabricantAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

For specific warranty terms and conditions, or to initiate a warranty claim, please refer to the documentation included with your product or contact E8 customer support.

Atenció al client

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact E8 customer support. Contact information can typically be found on the manufacturer's official weblloc web o a l'embalatge del producte.

When contacting support, please have your product model number (E8-ASW400MM-Single) and purchase date readily available.