Manual d'instruccions del mini escalfador d'aigua elèctric EcoSmart ECOMINI6

1. Producte acabatview

The EcoSmart ECOMINI6 Electric Mini Tank Water Heater is designed to provide hot water efficiently at the point of use. Its compact design allows for installation in various locations, such as under sinks or in small utility rooms. This unit can serve as a primary hot water source for a single faucet or as a booster for an existing hot water system, reducing wait times for hot water.

Característiques principals:

• Sleek and compact design with digital output temperature display.
• 99.8% energy efficient.
• Fabricat als Estats Units.
• Operates on 12 Amps.

2. Informació de seguretat

Please read and understand all instructions before installing or operating this water heater. Failure to follow these instructions could result in property damage, serious injury, or death.

• Seguretat elèctrica: Ensure the unit is connected to a properly grounded 110-volt outlet. Do not use extension cords. Disconnect power before performing any maintenance or service.
• Pressió de l'aigua: Do not operate the unit if the water supply is off or if the unit is not completely filled with water.
• Temperatura: Hot water can cause severe burns. Exercise caution when setting the temperature and using hot water.
• Instal·lació: Installation must be performed by a qualified plumber or technician in accordance with all local plumbing and electrical codes.
• Ubicació: Install the unit in a location where it is protected from freezing temperatures and where any potential leaks will not cause damage to the surrounding area.

3. Instal·lació i configuració

The EcoSmart ECOMINI6 is designed for easy installation. It can be mounted on a wall or placed on a flat surface. Ensure adequate space for plumbing connections and ventilation.

3.1 Muntatge

The unit is lightweight and can be wall-mounted using appropriate fasteners (not included) or placed on a sturdy, level surface. Ensure the mounting location can support the weight of the unit when full of water (approximately 24.9 lbs dry + 6 gallons * 8.34 lbs/gallon = ~75 lbs).

3.2 Connexions de fontaneria

Connect the cold water supply to the inlet pipe and the hot water outlet to the fixture. The unit requires a single water line connection. For booster applications, connect the unit in-line with your existing hot water supply.

Imatge 1: lateral view of the EcoSmart ECOMINI6, illustrating the plumbing connections at the top and the electrical cord extending from the side. This view helps in understanding how the unit integrates into a plumbing system.

3.3 Connexió elèctrica

Plug the unit into a standard 110-volt electrical outlet. The unit draws 12 Amps. Ensure the circuit can handle this load.

Imatge 2: Davant view of the EcoSmart ECOMINI6, highlighting the main body, the EcoSmart logo, and the blue control panel with the temperature adjustment dial and indicator lights.

3.4 Posada en marxa inicial

1. Assegureu-vos que totes les connexions de fontaneria siguin segures i no tinguin fuites.
2. Open the hot water faucet at the point of use to allow air to escape from the tank.
3. Once water flows steadily from the faucet, close the faucet.
4. Plug the unit into the electrical outlet. The 'Power' indicator light will illuminate.
5. Adjust the temperature dial to your desired setting. The 'Heating' indicator light will illuminate when the unit is actively heating water.

3.5 Vídeo d'instal·lació

For a visual guide on the EcoSmart Mini Tank Water Heater, please refer to the official product video:

4. Instruccions de funcionament

The EcoSmart ECOMINI6 is designed for simple operation.

4.1 Ajust de temperatura

The temperature of the water can be adjusted using the dial located on the front of the unit. Rotate the dial clockwise to increase the temperature and counter-clockwise to decrease it. Start with a moderate setting and adjust as needed to avoid excessively hot water.

4.2 Llums indicadors

• Llum de potència: Illuminates when the unit is plugged in and receiving electrical power.
• Llum de calefacció: Illuminates when the unit's heating element is active and heating the water. It will turn off once the set temperature is reached.

5. Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre escalfador d'aigua.

• Esbandida del tanc: Periodically flush the tank to remove sediment buildup. This frequency depends on your water quality. Turn off power and water supply, then drain the tank.
• Inspecció: Regularly inspect the unit for any signs of leaks, corrosion, or damage to the power cord.
• Neteja: Netegeu l'exterior de la unitat amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.

6. Solució De Problemes

If you encounter issues with your EcoSmart ECOMINI6, refer to the following common troubleshooting steps:

• Sense aigua calenta: Check if the unit is plugged in and the 'Power' light is on. Ensure the circuit breaker has not tripped. Verify the water supply is open.
• Aigua no prou calenta: Adjust the temperature dial to a higher setting. Allow sufficient time for the water to heat.
• Fuites: Turn off the water supply and power immediately. Inspect all plumbing connections for tightness. If leaks persist, contact a qualified plumber.
• Baixa pressió d'aigua: Check the water supply valve to ensure it is fully open. Inspect the faucet aerator for clogs.

For persistent issues, contact EcoSmart customer support.

7. Especificacions

8. Garantia i Suport

The EcoSmart ECOMINI6 Electric Mini Tank Water Heater comes with a warranty to ensure your peace of mind.

• Descripció de la garantia: 6 years limited leaks / 2 year parts.

For technical support, warranty claims, or further assistance, please contact EcoSmart customer service. Refer to the product packaging or the official EcoSmart weblloc web per obtenir la informació de contacte més actualitzada.