Introducció
This manual provides essential information for the installation, operation, and maintenance of your Puig 6101N License Support. Please read this manual thoroughly before installation to ensure proper use and safety.
The Puig 6101N License Support is designed for specific Ducati Panigale/S/Superleggera models, offering a robust and durable solution for license plate mounting. It is constructed from high-quality stainless steel to ensure longevity and resistance to environmental factors.
Informació de seguretat
Always wear appropriate personal protective equipment (PPE) during installation. Ensure the motorcycle is stable and secure before beginning any work. If you are unsure about any step, consult a qualified mechanic.
- No modifiqueu el producte de cap manera.
- Ensure all fasteners are tightened to the manufacturer's specifications.
- Regularly inspect the license support for any signs of wear or damage.
Producte acabatview
Figura 1: The Puig 6101N License Support mounted on the rear of a motorcycle, showing its position relative to the taillights and turn signals. The support is a black, flat metal bracket designed to hold a license plate.
The Puig 6101N License Support is a durable, stainless steel bracket designed to securely hold your motorcycle's license plate. It integrates seamlessly with the rear of compatible Ducati Panigale models. This specific model includes provisions for turn signal mounts, if required, though the license plate light is sold separately.
Configuració i instal·lació
Installation of the Puig 6101N License Support requires basic mechanical knowledge and tools. It is recommended to have the motorcycle on a stand for stability during the process.
Eines necessàries:
- Conjunt de claus d'endoll
- Conjunt de claus hexagonals
- Clau dinamomètrica (recomanada)
- Thread-locking compound (optional, but recommended for critical fasteners)
Passos d'instal·lació:
- Preparació: Ensure the motorcycle is turned off and cool. Disconnect the battery if working near electrical components.
- Elimina els components existents: Carefully remove the original license plate holder and any associated components from the rear of the motorcycle. Note the routing of any wiring for turn signals or license plate lights.
- Mount the Puig 6101N Support: Align the Puig 6101N License Support with the mounting points on the motorcycle's subframe or tail section. Secure it using the provided hardware. Ensure all bolts are hand-tightened first.
- Attach Turn Signals (if applicable): If your model requires turn signal relocation, attach them to the designated mounts on the Puig support. Connect any necessary wiring.
- Install License Plate: Secure your license plate to the Puig support using appropriate fasteners.
- Ajustament final: Once all components are in place and aligned, progressively tighten all fasteners to the motorcycle manufacturer's recommended torque specifications. Apply thread-locking compound if desired.
- Comprovació de la funcionalitat: Reconnect the battery (if disconnected) and test all lights (taillight, brake light, turn signals, and license plate light if installed) to ensure they function correctly.
Informació operativa
The Puig 6101N License Support is a passive component and does not require active operation. Its function is to securely hold the license plate and, if applicable, turn signals in their proper position.
Ensure your license plate is always clearly visible and free from obstructions as per local regulations.
Manteniment
Regular maintenance will ensure the longevity and safe operation of your Puig 6101N License Support.
- Neteja: Clean the license support regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspecció: Periodically inspect all mounting bolts for tightness. Vibrations from motorcycle operation can cause fasteners to loosen over time.
- Comprovació de danys: Check the support for any signs of cracks, bends, or corrosion, especially after impacts or prolonged exposure to harsh weather conditions.
Resolució de problemes
Most issues related to the license support are minor and can be resolved with simple checks.
| Problema | Causa possible | Solució |
|---|---|---|
| El suport de llicències sembla fluix. | Mounting bolts are loose. | Tighten all mounting bolts to specifications. Consider using thread-locking compound. |
| License plate vibrates excessively. | Loose license plate fasteners or support. | Ensure license plate is securely fastened to the support. Check support mounting bolts. |
| Turn signals not working after installation. | Cablejat incorrecte o connexió fluixa. | Check all electrical connections for turn signals. Ensure wires are properly connected and not pinched. |
Especificacions
- Model: 6101 N
- Marca: Puig
- Material: Acer inoxidable
- Dimensions: 35.56 x 25.4 x 7.62 cm (Product dimensions from JSON)
- Pes: 250 Grams (Item Weight from JSON)
- Compatibilitat: Ducati Panigale/S/Superleggera (Specific models)
- Característiques: Includes turn signal mounts (if needed), license plate light sold separately.
- Origen: Manufactured in Spain
Informació de la garantia
Puig products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official Puig weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
Atenció al client
For technical assistance, installation queries, or parts inquiries, please contact Puig customer support through their official website or the dealer from whom you purchased the product.
Weblloc: www.puig.tv
