1. Introducció
The Metabo Garden Pump P 6000 Inox (model 600966000) is designed for efficient garden irrigation, groundwater transport, and for pumping and circulating clean water. This manual provides essential information for the safe and efficient use of your pump, including detailed instructions for setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before operating the pump and keep it for future reference.
2. Instruccions de seguretat
Observeu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals. Si no seguiu aquestes instruccions, podeu patir lesions greus o danys al producte.
- Llegeix el manual: Familiarize yourself with the controls and proper use of the pump before operation.
- Seguretat elèctrica: Ensure the power supply matches the pump's specifications (240V). Always connect the pump to a properly grounded outlet. Do not operate the pump with a damaged power cord or plug.
- Seguretat de l'aigua: Never operate the pump dry. Ensure the pump is fully submerged or primed with water before starting.
- Instal·lació: Install the pump on a stable, level surface. Ensure all connections are secure and leak-free.
- Manteniment: Disconnect the pump from the power supply before performing any maintenance or cleaning.
- Nens i animals de companyia: Mantingueu els nens i les mascotes allunyats de la bomba en funcionament.
3. Producte acabatview
The Metabo P 6000 Inox garden pump is engineered for reliability and performance. Key features include:
- Metabo Pump Protection: Automatic dry-run protection with an LED display to safeguard the pump and ensure user safety.
- Multi-stage Pump Drive: Provides high performance and quiet operation.
- Motor sense manteniment: Equipped with a capacitor motor that requires no maintenance.
- Protecció de sobrecàrrega: Protects the motor from overheating during operation.
- Construcció duradora: Features a robust stainless steel pump housing and a high-quality mechanical seal system for extended service life.
- Disseny fàcil d'utilitzar: Includes a separate water filling opening for easy commissioning and a tool-free water drain screw for frost protection.
- Funcionament estable: Rubber feet reduce noise and vibration during use.
- Portabilitat: An ergonomic carrying handle allows for comfortable transport.
Image 1: The Metabo Garden Pump P 6000 Inox, showcasing its green housing and stainless steel pump head.
4. Configuració
Proper setup is crucial for the optimal performance and longevity of your Metabo garden pump.
- Col·locació: Position the pump on a firm, level surface. The integrated rubber feet help to minimize noise and vibration.
- Connexió de la línia d'aspiració: Connect a 1-inch internal thread suction hose to the pump's suction port. Ensure the suction hose is airtight to prevent air from entering the system, which can cause the pump to lose prime.
- Pressure Line Connection: Connect a 1-inch internal thread pressure hose to the pump's pressure port. This hose will lead to your irrigation system or water distribution point.
- Cebada de la bomba: Before first use, or if the pump has run dry, fill the pump housing completely with water through the separate water filling opening until no more air escapes. This ensures the pump is primed and ready for operation.
- Connexió elèctrica: Plug the pump into a suitable 240V grounded power outlet.
Image 2: An illustration demonstrating the typical setup of the Metabo garden pump, drawing water from a well and supplying it to a sprinkler system.
5. Funcionament
Once the pump is properly set up and primed, follow these steps for operation:
- Inicieu la bomba: Switch on the pump using the power switch. The pump will begin to draw water and build pressure.
- Monitoritzar el rendiment: Observe the water flow and pressure. The pump is designed for a maximum flow rate of 6000 liters per hour and a maximum delivery height of 55 meters (5.5 bar pressure).
- Protecció contra funcionament en sec: The integrated Metabo Pump Protection system will automatically shut off the pump if it detects a lack of water, preventing damage. An LED display will indicate this status.
- Protecció de sobrecàrrega: The pump is equipped with overload protection to prevent motor damage from overheating. If activated, the pump will shut down. Allow it to cool before restarting and check for any obstructions or issues.
- Apagar: To turn off the pump, simply switch off the power.
6. Manteniment
The Metabo P 6000 Inox pump is designed for low maintenance. Regular checks and proper winterization will ensure its long service life.
- Neteja general: Netegeu periòdicament l'exterior de la bomba amb anuncis.amp drap. No utilitzeu detergents ni dissolvents forts.
- Comproveu les connexions: Inspeccioneu regularment totes les connexions de les mànegues per detectar fuites i assegureu-vos que estiguin ben fixades.
- Hivernització: Before the first frost, completely drain all water from the pump to prevent freezing damage. Use the tool-free water drain screw for easy and thorough drainage. Store the pump in a frost-free environment.
- Motor: The capacitor motor is maintenance-free and does not require lubrication.
7. Solució De Problemes
If you encounter issues with your Metabo garden pump, refer to the following troubleshooting guide:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | No power supply; power switch off; motor overload protection activated. | Check power connection and outlet; turn on power switch; allow motor to cool and check for obstructions. |
| La bomba funciona però no flueix aigua | Pump not primed; air in suction line; suction height too high; suction filter blocked; water source empty. | Prime the pump completely; check suction line for leaks; reduce suction height (max 8m); clean suction filter; ensure adequate water supply. |
| Baix flux o pressió | Partial blockage in suction/pressure line; air in system; worn impellers. | Check and clear lines; re-prime pump; contact service for impeller replacement. |
| Pump Protection LED is on | Dry-run protection activated due to lack of water. | Check water source; re-prime the pump; ensure continuous water supply. |
If problems persist after attempting these solutions, please contact Metabo customer support or a qualified service technician.
8. Especificacions
Detailed technical specifications for the Metabo Garden Pump P 6000 Inox (600966000):
| Especificació | Valor |
|---|---|
| Número de model | 600966000 |
| Potència Nominal | 1300 W |
| Caudal màxim | 6000 l/h |
| Altura màxima de lliurament | 55 m |
| Pressió màxima | 5.5 bar |
| Alçada màxima de succió | 8 m |
| Connexió d'aspiració | 1" internal thread |
| Connexió de pressió | 1" internal thread |
| Material de la carcassa de la bomba | Acer inoxidable |
| Classe de protecció | IP X4 |
| Drive Shaft Material | Acer inoxidable |
| Number of Impellers | 5 |
| Dimensions (L x A x A) | 470 x 222 x 303 mm |
| Pes | 12.7 kg |
| Longitud del cable | 1.5 m |
| Voltage | 240 Volts |
Image 3: Performance curve graph illustrating the relationship between flow rate, delivery height, and pressure for various Metabo pump models, including the P 6000 Inox.
Image 4: Diagram showing the physical dimensions (length, width, height) of the Metabo Garden Pump P 6000 Inox.
9. Garantia i Suport
The Metabo Garden Pump P 6000 Inox comes with a standard 2-year warranty. You may be able to extend this warranty to 3 years by registering your product with Metabo within 4 weeks of the purchase date. Please refer to the official Metabo website or your purchase documentation for detailed warranty terms and registration instructions.
For technical assistance, spare parts, or warranty claims, please contact Metabo customer support. Ensure you have your model number (600966000) and proof of purchase available when contacting support.
