Hach 1417642 Nickel Standard Solution Instruction Manual

1. Introducció

This instruction manual provides essential information for the safe and effective use of the Hach 1417642 Nickel Standard Solution. This product is a high-quality chemical standard designed for precise analytical applications in laboratory and industrial settings.

2. Producte acabatview

The Hach 1417642 Nickel Standard Solution is a precisely formulated chemical standard with the following key characteristics:

• Concentració: 1000 mg/L as Ni (NIST traceable).
• Volum: 100 ml.
• Formulari de l'article: Líquid.
• Embalatge: Supplied in a durable plastic bottle.

This solution is specifically designed for the calibration of analytical instruments and for quality control in nickel testing procedures.

Image: A typical Hach chemical solution bottle, similar in appearance to the 1417642 Nickel Standard Solution, demonstrating the standard packaging.

3. Informació de seguretat

WARNING: Handle all chemical solutions with extreme care. Always refer to the product's Safety Data Sheet (SDS) for comprehensive safety information before use. The SDS is available from Hach Company.

3.1 Precaucions generals

• Wear appropriate personal protective equipment (PPE), including safety glasses or goggles, chemical-resistant gloves, and a lab coat.
• Use in a well-ventilated area or under a certified fume hood to minimize inhalation exposure.
• Avoid ingestion, inhalation of vapors, and direct skin or eye contact.
• Wash hands thoroughly with soap and water after handling the solution and before eating, drinking, or smoking.

3.2 Procediments d'emergència

• Contacte amb els ulls: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Seek immediate medical attention.
• Contacte amb la pell: Wash affected area with plenty of soap and water. Remove contaminated clothing and shoes. If irritation develops or persists, seek medical attention.
• Inhalació: Move to fresh air. If breathing is difficult, administer oxygen. If not breathing, give artificial respiration. Seek immediate medical attention.
• Ingestió: Do NOT induce vomiting. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person. Seek immediate medical attention.

4. Instruccions d'ús

The Nickel Standard Solution is intended for laboratory use as a calibration standard or for quality control purposes in analytical testing, particularly for nickel analysis.

4.1 Preparació per al seu ús

• Ensure the solution is at room temperature (typically 10-25°C or 50-77°F) before use to ensure accurate concentration.
• Gently invert the bottle several times to ensure homogeneity. Avoid vigorous shaking, which can introduce air bubbles.

4.2 Aplicació

• Always use clean, dry, and calibrated glassware or plasticware for all measurements and transfers.
• Pipette the required volume of standard solution into the appropriate vessel according to your specific analytical method.
• Follow the specific instructions provided with your analytical instrument or test kit for calibration, standardization, or sampla preparació.
• For best accuracy, use fresh aliquots of the standard solution for each calibration curve or quality control check. Do not return unused solution to the original bottle.

5. Emmagatzematge i manipulació

Proper storage is critical to maintain the stability, integrity, and accuracy of the standard solution over its shelf life.

• Store in the original container with the cap tightly sealed.
• Maintain storage temperature between 10°C and 25°C (50°F and 77°F). Avoid extreme temperatures.
• Keep away from direct sunlight, heat sources, and strong oxidizing agents.
• Do not freeze the solution, as this can alter its concentration and stability.
• Ensure the bottle is stored upright to prevent any potential leakage.
• Always check the expiration date printed on the bottle label. Do not use the solution past its expiration date, as its accuracy cannot be guaranteed.

6. Eliminació

Dispose of the Hach 1417642 Nickel Standard Solution and any contaminated materials (e.g., used glassware, PPE) in strict accordance with all applicable local, state, and federal regulations for hazardous waste. Nickel-containing solutions may be subject to specific disposal requirements.

• Consult your facility's chemical waste management procedures.
• Contact a licensed hazardous waste disposal company if you are unsure about proper disposal methods.
• Do not pour the solution down drains or dispose of it in general waste bins.

7. Especificacions

Key technical specifications for the Hach 1417642 Nickel Standard Solution:

8. Solució De Problemes

Troubleshooting for a standard solution primarily involves verifying its integrity and ensuring proper analytical procedures are followed if unexpected results occur.

• Unexpected Analytical Results (e.g., incorrect calibration, inaccurate readings):
  • Verify the expiration date of the standard solution.
  • Ensure proper storage conditions (temperature, light exposure) have been consistently maintained.
  • Check for any signs of contamination in the standard solution, glassware, or other reagents.
  • Confirm that all instrument calibration procedures were followed correctly and that the instrument is functioning properly.
  • Review the specific analytical method for any deviations or errors in procedure.
• Solution Appearance Changes (e.g., cloudiness, discoloration, particulates):
  • If the solution exhibits any visual changes from its original clear appearance, it may be compromised.
  • Do not use a compromised solution for critical applications. Dispose of it properly and obtain a fresh standard.

9. Garantia i Suport

For detailed information regarding product warranty, technical support, or to obtain the most current Safety Data Sheet (SDS) for the Hach 1417642 Nickel Standard Solution, please contact Hach Company directly.

Contact details and additional resources can typically be found on the official Hach Company weblloc web o a l'embalatge del producte.

Note: Specific warranty terms and direct support contact information are not provided within this manual. Please refer to the manufacturer's official channels for the most up-to-date information.