Manual d'usuari del contactor modular Finder 22.32.0.024.1320

1. Introducció

This manual provides essential instructions for the safe installation, operation, and maintenance of the Finder Series 22 Modular Contactor, model 22.32.0.024.1320. Please read this manual thoroughly before using the product to ensure proper function and to prevent potential hazards.

2. Informació de seguretat

Avís: Electrical installations should only be performed by qualified personnel. Failure to follow these safety instructions may result in electric shock, fire, or serious injury.

• Desconnecteu sempre l'alimentació abans d'instal·lar, revisar o desmuntar el contactor.
• Assegureu-vos que tot el cablejat compleixi amb els codis elèctrics locals i nacionals.
• No excedeixi el vol especificattage i qualificacions actuals.
• Protegiu el dispositiu de la humitat, la pols i les temperatures extremes.
• Verify proper grounding where applicable.

3. Producte acabatview

The Finder Series 22 Modular Contactor (Model 22.32.0.024.1320) is a 2-pole, 25 Amp device designed for various switching applications. It features a 24V AC/DC coil and AgNi (Silver Nickel) contacts, known for their reliability and durability. This modular contactor is suitable for DIN rail mounting and may include an LED indicator and mechanical indicator for operational status.

Figura 1: Finder Series 22 Modular Contactor (Model 22.32.0.230.4320 shown in image, but the product is 22.32.0.024.1320). The image displays the device with its coil terminals A1 and A2, and contact terminals 1, 2, 3, 4. Key specifications like "EN 61095", "25A 440V AC", and "AC 7a" are visible, along with the "Finder" brand logo and "Made in EU" marking. The coil voltage for the depicted unit is 230V AC/DC, while the product covered by this manual uses a 24V AC/DC coil.

4. Configuració i instal·lació

4.1 Muntatge

The modular contactor is designed for mounting on a standard 35mm DIN rail. Ensure the rail is securely fastened within an appropriate enclosure. Snap the contactor onto the DIN rail by aligning the top edge and pressing firmly until it clicks into place.

4.2 Connexions de cablejat

Refer to the wiring diagram provided with the product or on the device itself for specific connection points. Ensure all connections are tight and secure to prevent loose contacts and overheating.

• Coil Connections (A1, A2): Connect the 24V AC/DC control voltage to terminals A1 and A2. Observe polarity if using DC, though many coils are non-polar.
• Main Contact Connections (1, 2, 3, 4): Connect the load circuit to the main power contacts. For a DPST-NO (Double Pole Single Throw - Normally Open) configuration, terminals 1 and 3 are typically inputs, and 2 and 4 are outputs. When the coil is energized, contacts between 1-2 and 3-4 will close.

Always verify that the power supply is disconnected before making any wiring connections.

5. Funcionament

The Finder Series 22 Modular Contactor operates by energizing its coil. When the specified 24V AC/DC control voltage is applied to terminals A1 and A2, the electromagnetic coil activates, causing the normally open (NO) main contacts to close. This allows current to flow through the connected load.

• Energitzant la bobina: Apply 24V AC/DC to A1 and A2.
• Contact Closure: The main contacts (1-2 and 3-4) will close, completing the power circuit to the load.
• Desactivació de l'alimentació de la bobina: Remove the 24V AC/DC control voltage from A1 and A2.
• Contact Opening: The main contacts will return to their normally open state, interrupting the power circuit to the load.
• Indicadors: If equipped, the LED indicator will illuminate when the coil is energized, and the mechanical indicator will show the contact status.

6. Manteniment

Regular inspection and maintenance can extend the lifespan of your modular contactor. Always disconnect power before performing any maintenance.

• Inspecció visual: Comproveu periòdicament si hi ha signes de danys físics, decoloració o connexions soltes.
• Neteja: Keep the contactor free from dust and debris. Use a dry, soft cloth for cleaning. Do not use solvents or abrasive cleaners.
• Estanquitat del terminal: Ensure all terminal screws remain tight to prevent overheating due to poor contact.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information and technical support, please refer to the official Finder website or contact your authorized Finder distributor. Keep your purchase receipt for warranty claims.

Fabricant: Cercador