Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of the Wells SS-206D Food Warmer. Please read this manual thoroughly before operating the unit and retain it for future reference. This top-mount, built-in electric food warmer is designed for commercial use, featuring a 12" x 20" pan opening, drain, and wet/dry operation.
Instruccions importants de seguretat
- Desconnecteu sempre l'alimentació abans de fer el manteniment o la neteja.
- Assegureu-vos de posar a terra correctament per evitar descàrregues elèctriques.
- No feu servir si el cable d'alimentació o l'endoll estan danyats.
- Utilitzeu-lo només en una zona ben ventilada.
- Keep hands and utensils away from hot surfaces.
- Aquest aparell està dissenyat només per a ús comercial.
Configuració i instal·lació
The Wells SS-206D is a top-mount, built-in unit designed for integration into a countertop. Professional installation is recommended.
Desembalatge
Carefully remove the food warmer from its packaging. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your dealer.
Requisits d'ubicació
- Install in a location that can support the weight of the unit and its contents.
- Ensure adequate clearance for ventilation around the unit.
- The countertop opening should be precisely cut to accommodate the 12" x 20" pan opening.
Connexió elèctrica
The unit operates on 120 Volts and requires a dedicated circuit. The wattage is 1200 watts. Consult a qualified electrician for proper wiring and connection to meet local electrical codes.
Image: The Wells SS-206D Food Warmer, showing its stainless steel pan opening and the attached control module with a temperature knob and wiring. This image illustrates the main components of the built-in unit.
Connexió de drenatge
The SS-206D features a drain. Connect the drain to an appropriate plumbing system according to local codes. Ensure a slight slope for efficient water drainage.
Instruccions de funcionament
Operació humida
- Assegureu-vos que la vàlvula de drenatge estigui tancada.
- Fill the warmer well with hot water to the recommended level (typically 1 inch below the top rim of the well).
- Place food pans into the well.
- Turn the temperature control knob to the desired setting. Allow sufficient time for the water to heat up and stabilize.
- Monitor food temperature to ensure it remains within safe holding temperatures.
Funcionament en sec
- Ensure the warmer well is completely dry and clean.
- Place food pans directly into the well.
- Gireu el botó de control de temperatura a la configuració desitjada.
- Monitor food temperature closely as dry heat can be more intense.
Nota: Wet operation is generally preferred for maintaining food moisture and even heating. Dry operation is suitable for foods that do not require added moisture.
Neteja i Manteniment
Regular cleaning and maintenance will extend the life of your Wells Food Warmer.
Neteja diària
- Desconnecteu l'alimentació: Desconnecteu sempre la unitat i deixeu-la refredar completament abans de netejar-la.
- Drenatge d'aigua: If operating wet, open the drain valve to empty the water from the well.
- Interior net: Use a mild detergent and warm water with a soft cloth or sponge to clean the stainless steel interior. Avoid abrasive cleaners or scouring pads that can scratch the surface.
- Rentar i assecar: Rinse thoroughly with clean water and dry completely to prevent water spots and mineral buildup.
- Exterior net: Netegeu les superfícies exteriors amb un anunciamp tela.
Descaling (for Wet Operation)
Mineral deposits can build up over time, especially in hard water areas. Descale the unit regularly (e.g., monthly or as needed) using a commercial descaling solution designed for stainless steel appliances. Follow the descaler manufacturer's instructions carefully.
Inspecció
Periodically inspect the power cord for damage and ensure all connections are secure. Check the drain for any blockages.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no escalfa | Sense subministrament elèctric; interruptor automàtic saltat; element calefactor defectuós. | Check power cord and outlet; reset circuit breaker; contact qualified service technician. |
| Food not hot enough | Incorrect temperature setting; insufficient water (wet operation); mineral buildup. | Increase temperature setting; add water to proper level; descale the unit. |
| L'aigua no drena | Drain valve closed; drain clogged. | Open drain valve; clear any obstructions from the drain. |
| Excés de vapor | Too much water in well; high temperature setting. | Reduce water level; lower temperature setting. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | SS-206D |
| Marca | Pous |
| Tipus | Top-mount, Built-in Electric Food Warmer |
| Pan Opening Size | 12 cm x 20 cm |
| Funcionament | Humit/Sec |
| Material | Interior d'acer inoxidable |
| Voltage | 120 Volts |
| Wattage | 1200 watts |
| Escorreu | Inclòs |
Informació de la garantia
Wells Manufacturing Company warrants its equipment against defects in materials and workmanship for a period of one (1) year from the date of original installation or 18 months from the date of shipment from the factory, whichever comes first. This warranty is subject to certain conditions and exclusions. For full warranty details, please refer to the official Wells warranty statement or contact Wells customer service.
Atenció al client
For technical assistance, parts, or service inquiries regarding your Wells SS-206D Food Warmer, please contact Wells customer support:
- Weblloc: www.wellsbloomfield.com
- Telèfon: Refer to the Wells weblloc per als números de contacte regionals.
- Servei: Contact an authorized Wells service agent for repairs.
