Intellitec Auto Energy Selector Module

Producte acabatview

The Intellitec 00-00714-000 Auto Energy Selector Module is designed to efficiently manage electrical loads in recreational vehicles (RVs). This module automatically alternates between two high-current 20-amp loads, such as a microwave and an air conditioning unit, to prevent tripping a circuit breaker when operating on a 30-amp shore power connection. It ensures stable power distribution and optimal appliance performance within the RV's electrical system. This specific module is also known as Winnebago Industries part number 136481-01-000.

Informació important de seguretat

CAUTION: HAZARD OF ELECTRICAL SHOCK OR BURN. Always turn off the power supply to this equipment before working inside or performing any installation or maintenance procedures. Failure to do so can result in serious injury or death.

ADVERTIMENT: Refer service to qualified personnel. To reduce the risk of fire or electric shock, install in a controlled environment relatively free of contaminants.

FOR SUPPLY CONNECTIONS: Use #12AWG rated at least 75°C. Use copper conductors only.

Ensure all connections are secure and torqued to the specified values to prevent loose connections and potential hazards.

Guia d'instal·lació

Installation of the Intellitec Auto Energy Selector Module requires electrical knowledge. If you are not comfortable working with electrical systems, it is highly recommended to seek assistance from a qualified RV technician.

Passos previs a la instal·lació:

1. Desconnecteu l'alimentació: Before beginning any work, ensure all power sources to the RV are disconnected. This includes unplugging from shore power, turning off the generator, and disconnecting the battery bank. Verify with a voltmeter that no power is present.
2. Locate Existing Module (if replacing): The module is typically found in an electrical compartment, often near the main breaker panel or where high-draw appliances like the microwave and AC are wired. Note the existing wiring configuration.
3. Accessibilitat: Be aware that access to the module may be constrained, requiring careful maneuvering.

Instruccions de cablejat:

Refer to the wiring diagram printed on the module for correct connections. The module manages two 20A loads. Ensure you use #12AWG copper conductors rated for at least 75°C for all supply connections.

Imatge: Davant view of the Intellitec Auto Energy Selector Module, clearly showing the wiring diagram. The diagram illustrates connections for Line, Primary Load, Secondary Load, Neutral, and a Breaker. Torque specifications for the GND BAR (20 IN/LBS) and other terminals (14 IN/LBS) are also visible. Safety warnings regarding electrical shock and the use of #12AWG copper conductors are prominent.

• Connexió de línia: Connect the main incoming power line to the designated "LINE" terminal.
• Primary Load: Connect the wiring for the primary high-current appliance (e.g., air conditioner) to the "PRIMARY" load terminal.
• Secondary Load: Connect the wiring for the secondary high-current appliance (e.g., microwave) to the "SECONDARY" load terminal.
• Neutral Connections: Connect all neutral wires to the appropriate "NEUTRAL" terminals.
• Ground Bar: Connect the ground wire to the GND BAR and torque to 20 IN/LBS.
• Parell de terminal: Ensure all other terminal connections are torqued to 14 IN/LBS for a secure and safe connection.

Post-instal·lació:

1. Mòdul segur: Mount the module securely in its intended location.
2. Restaura l'alimentació: Carefully restore power to the RV, starting with the battery, then generator, and finally shore power.
3. Funcionalitat de prova: Test both primary and secondary loads (e.g., AC and microwave) to ensure they operate correctly and the module is managing the power distribution as expected.

Imatge: Lateral i posterior view of the Intellitec Auto Energy Selector Module, illustrating its compact design and the mounting points for secure installation within an RV's electrical compartment. This view highlights the physical dimensions and how it would fit into a confined space.

Principis de funcionament

The Intellitec Auto Energy Selector Module operates automatically to prevent overloading a 30-amp RV electrical system when two high-draw appliances are active. It intelligently monitors the current draw of the primary and secondary loads. When both appliances demand power simultaneously, the module will momentarily de-energize one load (typically the secondary load) to allow the other to operate, then cycle back to provide power to the de-energized load once the primary load's demand decreases or cycles off. This ensures that the total current draw remains within safe limits, preventing circuit breaker trips and maintaining system stability.

Users do not need to manually interact with the module during operation; its function is entirely automatic.

Manteniment

The Intellitec Auto Energy Selector Module is designed for long-term, maintenance-free operation. However, periodic inspection of the electrical connections is recommended to ensure they remain tight and free from corrosion. This should only be performed by qualified personnel with the power supply disconnected.

• Inspecció anual: Annually, or before extended trips, visually inspect the module and its wiring for any signs of wear, damage, or loose connections.
• Neteja: Keep the area around the module clean and free of dust and debris to ensure proper ventilation and prevent overheating.
• Condicions ambientals: Ensure the module is installed in a controlled environment, as specified in the safety warnings, to protect it from excessive moisture or contaminants.

Resolució de problemes

If you experience issues with your RV's electrical system that you suspect are related to the Auto Energy Selector Module, consider the following common problems and solutions:

For complex electrical issues or if troubleshooting steps do not resolve the problem, consult a certified RV electrician or the product manufacturer.

Especificacions del producte

Garantia i Suport

Avís legal:

Avís: Some components or parts may exhibit slight imperfections or flaws that are normal or acceptable part standards within the RV industry. These characteristics are not considered to be a defect in workmanship or material and are not eligible to be returned based on such imperfections.

Suport del fabricant:

For technical assistance, warranty claims, or further information regarding the Intellitec Auto Energy Selector Module, please contact Intellitec Products LLC directly. Refer to their official weblloc web o l'embalatge del producte per obtenir les dades de contacte més actualitzades.

When contacting support, please have your product model number (00-00714-000) and any relevant purchase information readily available.