1. Introducció
This manual provides essential information for the safe and efficient use of your Gewiss GW30411 Electronic 2-Channel Programmer. Please read these instructions carefully before installation and operation, and retain them for future reference. The GW30411 is designed for precise control of electrical circuits over time.
2. Informació de seguretat
WARNING: Risk of electric shock. Installation and maintenance should only be performed by qualified personnel.
- Desconnecteu sempre l'alimentació abans d'instal·lar o fer el manteniment del dispositiu.
- Assegureu-vos que tot el cablejat compleixi els codis i les regulacions elèctriques locals.
- No exposeu el dispositiu a la humitat, temperatures extremes ni ambients corrosius.
- Do not attempt to open or modify the device; there are no user-serviceable parts inside.
- Mantenir fora de l'abast dels nens.
3. Producte acabatview
The Gewiss GW30411 is an electronic 2-channel programmer designed for managing electrical loads with timed switching. It features a clear digital display and intuitive controls for setting programs.
Figura 1: Frontal view of the Gewiss GW30411 Programmer. The display shows the current time (10:22), day (VE 13 GIU, likely Friday 13th June), and the 'ON' status, indicating an active program. Buttons for navigation and setting are visible on the right side.
Característiques principals:
- Digital display for time and program status.
- Two independent channels for flexible programming.
- Manual override function.
- Disseny compacte per a una fàcil instal·lació.
4. Configuració i instal·lació
Installation should be carried out by a qualified electrician. Ensure the main power supply is disconnected before proceeding.
4.1 Muntatge
Mount the programmer in a suitable electrical enclosure or on a DIN rail, ensuring adequate ventilation and protection from environmental factors.
4.2 Cablejat
- Identify the power supply terminals (L and N) and connect them according to the wiring diagram provided with the product packaging.
- Connect the load wires for Channel 1 and Channel 2 to their respective output terminals.
- Double-check all connections for security and correctness before restoring power.
Refer to the detailed wiring diagram included in the product packaging for specific terminal assignments.
5. Instruccions de funcionament
After successful installation and power-up, the device will display the current time or a default setting. Use the buttons on the right side of the unit to navigate menus and set parameters.
5.1 Configuració inicial de la data i l'hora
- Premeu el botó MENÚ button (if available, or the primary setting button) to enter the settings mode.
- Navegueu fins a HORA / DATA configuració utilitzant el Amunt/Avall botons.
- Adjust the hour, minute, day, month, and year using the +/- or Amunt/Avall botons.
- Confirm each setting with the ENTRAR or OK botó.
5.2 Programming On/Off Cycles
The GW30411 allows you to set specific ON/OFF times for each of its two channels.
- Entreu al mode de programació prement el botó PROG botó.
- Select the desired channel (Channel 1 or Channel 2).
- Estableix el desitjat ON time (hour and minute) for the first event.
- Estableix el desitjat OFF time (hour and minute) for the first event.
- Specify the days of the week for which the program should be active.
- Save the program and exit programming mode.
5.3 Anulació manual
Per anul·lar temporalment la programació, utilitzeu la ON/OFF or MANUAL button. This typically cycles through ON, OFF, and AUTO modes. The display will indicate the current manual status.
6. Manteniment
The Gewiss GW30411 programmer requires minimal maintenance.
- Neteja: Netegeu l'exterior amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspecció: Periodically check for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
7. Solució De Problemes
If you encounter issues with your GW30411 programmer, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc. | Sense font d'alimentació. | Comproveu el disjuntor i les connexions del cablejat. |
| Programmed events are not activating. | Incorrect time/date setting; Program not saved; Manual override active. | Verify time/date; Re-enter and save program; Check manual override status. |
| El dispositiu no respon. | Error temporal de programari. | Disconnect power for 30 seconds, then restore. If problem persists, contact support. |
8. Especificacions
- Marca: Gewiss
- Model: GW30411
- Tipus: Electronic 2-Channel Programmer
- Fabricant: GEWISS
- ASIN: B00OM8R0GS
- Disponibilitat de recanvis: Informació no disponible
- Actualitzacions de programari garantides fins a: Informació no disponible
- Date Listed on Amazon.com.be: 20 de maig de 2022
9. Garantia i Suport
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Gewiss products are designed for reliability and performance.
If you require technical assistance or have questions not covered in this manual, please contact Gewiss customer support or your authorized distributor. Ensure you have your product model number (GW30411) and purchase details ready.
