Introducció
This user manual provides comprehensive instructions for the proper installation, use, and maintenance of your SHAD Top Case Backrest. Designed to enhance passenger comfort, this backrest is specifically compatible with SHAD SH29, SH33, and SH34 top cases. Please read this manual thoroughly before installation to ensure correct fitting and safe operation.
Informació de seguretat
- Always ensure the backrest is securely fastened to the top case before riding.
- Do not modify the backrest or its mounting hardware. Use only original SHAD parts.
- Regularly inspect the backrest and its mounting points for any signs of wear, damage, or looseness.
- Improper installation can lead to detachment during use, posing a safety risk. If unsure, seek professional assistance.
Contingut del paquet
Abans de començar la instal·lació, comproveu que hi hagi tots els components:
- 1 x SHAD Top Case Backrest (D0RI40 PRO3)
- 2 x Brackets de muntatge
- 2 x cargols
- 2 x rentadores
Figure 1: Components of the SHAD Top Case Backrest kit. This image shows the main backrest pad, along with the small metal mounting brackets, screws, and washers required for attachment to the top case.
Configuració i instal·lació
Follow these steps carefully to install the backrest on your SHAD top case:
- Identificar els punts de muntatge: Locate the designated mounting points on the rear of your SHAD SH29, SH33, or SH34 top case. These are typically marked or pre-drilled.
- Position the Backrest: Align the backrest pad with the mounting points on the top case. Ensure the curved side of the backrest faces outwards, providing ergonomic support.
- Col·loqueu els suports de muntatge: Place one mounting bracket over each designated hole on the inside of the top case, aligning them with the holes on the backrest.
- Assegureu-vos amb cargols: Insert a screw through each washer, then through the mounting bracket, and into the corresponding hole on the backrest.
- Apretar els elements de fixació: Using a suitable screwdriver, carefully tighten both screws until the backrest is firmly secured to the top case. Do not overtighten, as this may damage the top case or backrest.
- Verifica l'estabilitat: Gently pull on the backrest to ensure it is stable and does not wobble. If there is any movement, re-check the alignment and tightness of the screws.
Figure 2: The SHAD Top Case Backrest (D0RI40 PRO3) securely installed on a compatible SHAD top case. The backrest is positioned on the rear of the case, providing a comfortable padded surface for a passenger.
Funcionament (ús)
The SHAD Top Case Backrest is designed to provide additional comfort and support for a passenger riding on a motorcycle equipped with a compatible SHAD top case. Once installed, the backrest requires no further operation. Ensure your passenger is aware of its presence and can comfortably lean against it during rides.
Manteniment
To ensure the longevity and appearance of your backrest:
- Neteja: Clean the backrest surface with a soft cloth dampened with mild soap and water. Avoid harsh chemicals or abrasive cleaners, which can damage the material.
- Inspecció: Periodically check the mounting screws for tightness. Vibrations from riding can sometimes cause fasteners to loosen over time.
- Emmagatzematge: If the top case is stored for extended periods, especially in extreme temperatures, consider covering the backrest to protect it from UV degradation or material hardening.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Backrest feels loose or wobbly. | Els cargols de muntatge no estan prou ajustats. | Tighten the mounting screws securely. Do not overtighten. |
| Backrest does not align with holes. | Incorrect positioning or incompatible top case. | Ensure the backrest is correctly oriented. Verify your top case is a SHAD SH29, SH33, or SH34 model. |
| Material appears worn or cracked. | Exposure to harsh weather or chemicals; age. | Consider replacing the backrest. Avoid using harsh cleaning agents. |
Especificacions
- Marca: SHAD
- Model: D0RI40 PRO3
- Número de peça: 52164
- Compatibilitat: SHAD SH29, SH33, SH34 Top Cases
- Pes aproximat: 1 quilogram (2.2 lliures)
Garantia i Suport
For warranty information or technical support regarding your SHAD Top Case Backrest, please refer to the warranty documentation provided with your original top case or contact your authorized SHAD dealer or the manufacturer directly. Keep your proof of purchase for any warranty claims.
For further assistance, you may visit the official SHAD weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
