Manual d'usuari del patinet de nitro Zinc

1. Producte acabatview

The Zinc Nitro Scooter is designed for exciting and dynamic riding experiences. It features a durable aluminum construction and incorporates interactive elements to enhance play.

Figura 1: Principal view of the Zinc Nitro Scooter, showcasing el seu disseny elegant i la seva construcció robusta.

Característiques principals:

• Llums davanters i posteriors: For enhanced visibility and exciting effects, especially in low-light conditions.
• Rear Screeching Brakes: Provides quick and effective stopping power with an engaging sound effect.
• Accelerating Engine Sounds: Realistic engine sounds activated by twisting the throttle, making riding more immersive.
• Construcció duradora: Made from aluminum for lightweight strength.
• Disseny plegable: Permet un fàcil emmagatzematge i transport.
• Big Wheels: Equipped with awesome big wheels for a smooth ride.

2. Informació de seguretat

Always prioritize safety when operating the Zinc Nitro Scooter. Failure to follow these guidelines may result in injury.

Pautes generals de seguretat:

• Edat recomanada: Suitable for ages 5 to 9 years.
• Límit de pes: Do not exceed the maximum weight limit of 45 pounds (approximately 20.4 kg).
• Equip de protecció: Porteu sempre casc, genolleres, colzeres i protectors de canells quan aneu en bicicleta.
• Supervisió: Adult supervision is recommended, especially for younger riders.
• Superfície de conducció: Ride on smooth, dry, paved surfaces away from traffic. Avoid uneven terrain, sand, gravel, or wet surfaces.
• Frenatge: Familiarize yourself with the braking system before riding at speed.
• Manteniment: Regularly inspect the scooter for loose parts, damage, or wear before each use.
• Seguretat de la bateria: The scooter requires 3 x AAA batteries for lights and sounds. Ensure correct battery installation and replace them when needed. Do not mix old and new batteries or different types of batteries.

3. Muntatge i muntatge

The Zinc Nitro Scooter comes largely pre-assembled. Follow these steps to prepare it for use.

Desplegant el patinet:

1. Localitza el mecanisme de plegat a prop de la base de la tija del manillar.
2. Carefully release the locking mechanism.
3. Lift the handlebar stem until it clicks securely into the upright position. Ensure all locking mechanisms are fully engaged before riding.

Ajust del manillar:

The handlebar height is adjustable to suit different rider heights.

1. Obriu l'alliberament ràpid clamp a la tija del manillar.
2. Adjust the handlebar to a comfortable height, typically around waist level for the rider.
3. Securely close the quick-release clamp. Ensure the handlebar is firmly locked in place and does not wobble.

Battery Installation (for Lights and Sounds):

The scooter requires 3 x AAA batteries for its electronic features.

1. Locate the battery compartment, typically on the handlebar unit.
2. Amb un tornavís petit, obriu la tapa del compartiment de la bateria.
3. Introduïu 3 piles AAA noves, assegurant-vos de la polaritat correcta (+/-).
4. Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.

4. Instruccions de funcionament

Learn how to safely and effectively operate your Zinc Nitro Scooter.

Engegar el scooter:

• Col·loca un peu fermament a la plataforma del patinet.
• Use your other foot to push off the ground, gaining initial momentum.
• Once moving, place both feet on the deck, one behind the other.

Using Lights and Sounds:

• Llums davanters i posteriors: The scooter is equipped with lights at the front and rear for visibility. These lights activate when the scooter is in motion or when the electronic features are engaged.


Figure 2: Detail of the front lights, which illuminate for visibility and effect.

• Sons del motor: Twist the throttle grip on the handlebar to activate realistic engine acceleration sounds.
• Key Activated Features: Some electronic features, including lights and sounds, are activated by a key mechanism on the handlebar unit. Ensure the key is turned to the "ON" position.

Frenatge:

• The Zinc Nitro Scooter features a rear screeching brake. To engage the brake, gently press your foot down on the rear fender brake located above the rear wheel.
• Apply steady pressure to slow down or stop. The brake will produce a screeching sound for added effect.


Figura 3: View of the rear fender brake, designed for quick stopping.

Vídeo de demostració:

5. Manteniment

Regular maintenance will ensure the longevity and safe operation of your Zinc Nitro Scooter.

• Neteja: Netegeu el patinet amb anuncisamp drap després de cada ús. Eviteu utilitzar productes químics agressius o netejadors abrasius.
• Comprovació dels elements de fixació: Regularly check all nuts, bolts, and screws to ensure they are tight. It is crucial to tighten all components regularly, especially after initial use and before each ride.
• Inspecció de rodes: Inspect the wheels for wear and tear. Replace worn wheels promptly.
• Lubricació de rodaments: Periodically check and lubricate wheel bearings if necessary to ensure smooth rolling.
• Brake Functionality: Test the brake before each ride to ensure it is functioning correctly and provides adequate stopping power.
• Emmagatzematge: Guardeu el patinet en un lloc sec i fresc, allunyat de la llum solar directa i la humitat.

6. Solució De Problemes

This section addresses common issues you might encounter with your Zinc Nitro Scooter.

7. Especificacions

8. Garantia i Suport

For detailed warranty information and customer support, please refer to the documentation included with your purchase or visit the official Zinc weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

If you require assistance with troubleshooting or replacement parts not covered in this manual, please contact Zinc customer service directly.