1. Introducció
The Nice P1S portable wireless transmitter is designed for the control of blinds and rolling shutters. The NICE P1S is a 1-channel transmitter for individual management of 1 group automatically per group, also with individual activation of climate sensors. With just one click, you get the right light. The LED-indicated control buttons switch on and off the reception of automatic controls, which are transmitted by the climate sensors of the installation.
2. Producte acabatview
Figure 1: NICE P1S Portable Radio Transmitter. This image shows the sleek white design of the transmitter with its intuitive control buttons for up, stop, down, and light/dark settings. The 'Nice' brand logo is visible at the bottom.
Característiques principals:
- Disseny ergonòmic: Intuitive operation for user comfort.
- Programació fàcil: Ability to store the same transmitter for multiple blinds or rolling shutters to create groups.
- MemoGroup Function: Allows recalling the latest multi-group setting.
- Compatibilitat: Designed for Era Mat and Era Fit series tubular motors with integrated receivers.
- Automatic Copying: New transmitters can be automatically copied from an already configured transmitter by simply pressing a button.
- Llarga vida útil de la bateria: Powered by 2 x 1.5 V DC AAA batteries, with an approximate battery life of 2 years (based on 10 transmissions per day).
- Interval estès: Up to 200 meters in open field and 35 meters indoors.
3. Configuració
3.1 Instal·lació de la bateria
- Localitzeu el compartiment de la bateria a la part posterior del transmissor.
- Obriu la tapa del compartiment de la bateria.
- Introduïu 2 piles alcalines AAA d'1.5 V, assegurant-vos de la polaritat correcta (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
3.2 Initial Programming (Pairing with Motors)
For Era Mat and Era Fit series tubular motors with integrated receivers, the programming process is simplified via buttons located on the back of the transmitter within the battery compartment.
- Refer to your motor's instruction manual for specific pairing instructions.
- Typically, this involves putting the motor into programming mode.
- Press the designated programming button on the P1S transmitter (often located near the battery compartment) to send the pairing signal.
- Confirm successful pairing as indicated by the motor (e.g., a jog movement or LED indicator).
3.3 Copying Existing Transmitters
The P1S can automatically copy settings from an already configured transmitter.
- Place the new P1S transmitter close to the already configured transmitter.
- Activate the copying mode on the new P1S (refer to specific instructions, often a combination of button presses).
- Press a button on the already configured transmitter.
- The new P1S will copy the configuration.
4. Instruccions de funcionament
The NICE P1S features intuitive buttons for controlling your blinds and rolling shutters.
- Botó amunt (▲): Press to raise the blind/shutter.
- Botó d'aturada (■): Press to stop the blind/shutter at any desired position.
- Botó avall (▼): Press to lower the blind/shutter.
- Light/Dark Buttons (☀ / ☽): These buttons, indicated by LED lights, control the reception of automatic commands from climate sensors. Press to enable or disable automatic control based on light conditions.
4.1 Group Control (MemoGroup)
If you have programmed the transmitter to control multiple blinds/shutters as a group, the MemoGroup function allows you to recall the latest multi-group setting. Simply press the desired control button (Up, Stop, Down) to operate the entire group.
5. Manteniment
5.1 Substitució de la bateria
When the transmitter's range decreases or the LED indicators dim, it's time to replace the batteries.
- Obriu el compartiment de la bateria a la part posterior.
- Remove the old 2 x 1.5 V AAA alkaline batteries.
- Insert new 2 x 1.5 V AAA alkaline batteries, observing correct polarity.
- Tanqueu el compartiment de la bateria.
- Eliminar les piles velles de manera responsable d'acord amb la normativa local.
5.2 Neteja
Clean the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'emissor no respon | Bateries esgotades | Replace batteries (see Section 5.1). |
| Reduït rang de funcionament | Bateries baixes o interferències | Replace batteries. Check for sources of radio interference (e.g., other wireless devices). |
| Motor not responding to commands | Transmitter not paired or motor out of range | Ensure transmitter is correctly paired (see Section 3.2). Move closer to the motor. |
7. Especificacions
| Característica | Detall |
|---|---|
| Model | P1S |
| Font d'alimentació | 2 x 1.5 V AAA Alkaline batteries |
| Durada de la bateria | Approx. 2 years (10 transmissions/day) |
| Freqüència | 433.92 MHz ± 100 KHz |
| Protection Rating (IP) | IP40 (Indoor or protected environment use) |
| Interval | 200 m (open field), 35 m (indoors) |
| Codi sense fil | Rolling Code |
| Temperatura de funcionament | -5 °C a +55 °C |
| Dimensions (mm) | 49 x 150 x 14 |
| Pes | 85 g |
