Producte acabatview
The Allied Telesis AT-GS950/24 is a 24-port Gigabit WebSmart Switch designed for small to medium-sized networks. It features 24 x 10/100/1000Base-T ports and 2 x SFP ports, offering flexible connectivity options. This managed switch provides essential features for network control and monitoring, making it suitable for various desktop and rack-mount installations.
Figure 1: Front panel of the AT-GS950/24-10 WebSmart Switch, illustrating the Ethernet ports, SFP slots, and status indicators.
Guia de configuració
Follow these steps to properly set up your AT-GS950/24-10 WebInterruptor intel·ligent:
- Desembalatge i inspecció: Carefully remove the switch from its packaging. Verify that all components are present and undamaged.
- Opcions de muntatge:
- Ubicació d'escriptori: Place the switch on a flat, stable surface with adequate ventilation.
- Muntatge en bastidor: Use the provided wall and 19-inch rack mount brackets to secure the switch in a standard equipment rack. Ensure proper airflow around the unit.
- Connexió d'alimentació: Connect the power cord to the switch's power input and then to a grounded electrical outlet.
- Connexions de xarxa:
- Connect Ethernet cables from your network devices (computers, servers, other switches) to the 10/100/1000Base-T ports (ports 1-24) on the front panel.
- For fiber optic connections, insert compatible SFP transceivers into the SFP ports (ports 23-24) and connect fiber optic cables.
- Configuració inicial (opcional): For initial management access, connect a computer to any Ethernet port or use the console port with a serial cable. Refer to the detailed configuration guide for WebSmart interface setup.
Instruccions de funcionament
Once the switch is powered on and connected, it will begin operating. Here are key aspects of its operation:
- Encès: After connecting the power, the switch will automatically power on. The PODER LED indicator on the front panel should illuminate.
- Indicadors LED: Observe the LED indicators for each port:
- LED d'enllaç/Actuar: Indicates a valid network link (solid green) and network activity (blinking green).
- LED de velocitat: Indicates the connection speed (e.g., green for Gigabit, amber for 100Mbps, off for 10Mbps - consult the full manual for exact color codes).
- WebGestió intel·ligent: El commutador es pot gestionar mitjançant un web-based interface. Access this interface by typing the switch's IP address into a web browser. This allows for configuration of VLANs, QoS, port mirroring, and other advanced features.
- Funcionalitat Plug-and-Play: For basic network connectivity, the switch operates as a plug-and-play device, automatically detecting connected devices and negotiating speeds.
Manteniment
Proper maintenance ensures the longevity and optimal performance of your switch:
- Neteja: Netegeu regularment l'exterior de l'interruptor amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol. Assegureu-vos que les obertures de ventilació estiguin lliures de pols i obstruccions.
- Actualitzacions de firmware: Reviseu periòdicament l'Allied Telesis website for firmware updates. Keeping the firmware current can improve performance, add new features, and address security vulnerabilities.
- Condicions ambientals: Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing it near heat sources or in direct sunlight.
- Gestió de cables: Organitzeu els cables de xarxa per evitar embolics i garantir un flux d'aire adequat.
Resolució de problemes
If you encounter issues with your switch, consider the following troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense LED d'alimentació | Power cord disconnected; Power outlet issue; Switch malfunction. | Check power cord connection; Try a different power outlet; Contact support if issue persists. |
| No Link/Act LED on port | Cable not connected; Faulty cable; Device not powered on; Incorrect port settings. | Ensure cable is securely connected; Replace cable; Power on connected device; Check switch port configuration via WebSmart interface. |
| Velocitat de xarxa lenta | Cable issue; Port speed mismatch; Network congestion; Duplex mismatch. | Verify cable quality (use Cat5e/6 for Gigabit); Check port speed settings on both switch and device; Monitor network traffic; Ensure duplex settings match. |
| No es pot accedir WebSmart interface | Incorrect IP address; Network configuration issue; Browser problem. | Verify switch IP address; Ensure your computer is on the same subnet; Try a different web browser; Reset switch to factory defaults if necessary (consult full manual). |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | AT-GS950/24-10 |
| Marca | Telesis aliada |
| Velocitat de transferència de dades | 1000 megabits per segon (Gigabit Ethernet) |
| Nombre de Ports | 24 x 10/100/1000Base-T, 2 x SFP |
| Tipus de canvi | Gestionat (Webintel·ligent) |
| Tipus d'interfície | Ethernet, SFP |
| Dimensions del producte | 10 x 17 x 2 polzades |
| Pes de l'article | 7.2 lliures |
| UPC | 012302361338, 767035178431 |
| ASIN | B00PB4VLZI |
| Data de primera disponibilitat | 6 de novembre de 2014 |
Informació de la garantia
The Allied Telesis AT-GS950/24-10 WebSmart Switch comes with a Garantia del fabricant de per vida. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and limitations, please refer to the official warranty documentation provided by Allied Telesis or visit their official weblloc.
Suport
For technical assistance, product documentation, or further inquiries regarding your Allied Telesis AT-GS950/24-10 WebSmart Switch, please contact Allied Telesis customer support. You can typically find support contact information, FAQs, and additional resources on the official Allied Telesis weblloc.
It is recommended to have your product model number (AT-GS950/24-10) and serial number ready when contacting support.
