Introducció
The Kidde Fire Sentry Smoke Detector, model i9040, is a compact, battery-operated unit designed to provide continuous protection against smoke and fire. Its 4-inch diameter allows for installation in various spaces, including homes, RVs, and mobile homes. This ionization smoke alarm is engineered to detect invisible fire particles associated with flaming fires, sounding an 85-decibel alarm upon detection. Powered by a 9-volt battery, it ensures operation even during power outages. Key features include a test-hush button for easy testing and silencing of nuisance alarms, and a red LED indicator for sensing smoke or fire. The unit also chirps to indicate when the battery needs replacement.

Figura 1: Frontal view of the Kidde Fire Sentry Smoke Detector.
Configuració i instal·lació
The Kidde i9040 smoke detector is designed for easy, wire-free installation. Follow these steps to set up your device:
- Instal·lació de la bateria: Open the battery compartment. Insert a fresh 9-volt alkaline battery, ensuring correct polarity. The device is powered by a 9-volt battery, providing coverage during power failures.
- Suport de muntatge: Secure the mounting bracket to your desired location on the ceiling or wall using the provided screws. Ensure the bracket is firmly attached.
- Connecteu el detector: Align the smoke detector with the mounting bracket and twist clockwise until it locks securely into place.
- Prova inicial: After installation, press and hold the Test-Hush button to ensure the alarm sounds. A red LED will indicate sensing.

Figure 2: Inserting the 9-volt battery into the smoke detector.

Figure 3: The mounting bracket for secure installation.
Vídeo d'instal·lació
Video 1: Official Kidde Battery-Operated Smoke Detector Alarm overview and installation guide.
Instruccions de funcionament
The Kidde i9040 smoke detector operates automatically once the battery is installed. Familiarize yourself with its key functions:
- So d'alarma: When smoke or fire is detected, the unit will emit an 85-decibel alarm.
- Indicador LED vermell: A red LED light will illuminate when the smoke detector is sensing smoke or fire.
- Botó de prova de silenci: This button serves two primary functions:
- Prova: Press and hold the button to test the alarm's circuitry, horn, and battery function. The alarm should sound briefly.
- Hush: In case of nuisance alarms (e.g., from cooking or shower steam), press the button to temporarily silence the alarm. The alarm will automatically reset after a few minutes if the smoke clears.
- Low Battery Chirp: The smoke detector will emit a regular chirp sound when the 9-volt battery needs to be replaced.

Figure 4: The Test-Hush button for operation and silencing.
Manteniment
Regular maintenance ensures the optimal performance and longevity of your smoke detector:
- Proves setmanals: It is recommended to test your smoke alarm weekly by pressing the Test-Hush button. This verifies that the alarm is functioning correctly.
- Substitució de la bateria: Replace the 9-volt battery immediately when the unit begins to chirp. This indicates a low battery. Always use a fresh 9-volt alkaline battery.
- Neteja: Periodically clean the exterior of the smoke detector with a soft, damp cloth. Do not use cleaning sprays or solvents. Ensure the openings are free from dust and debris to maintain proper smoke detection.
Resolució de problemes
If your Kidde i9040 smoke detector is not functioning as expected, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| L'alarma sona periòdicament | Bateria baixa | Substitueix la pila de 9 volts. |
| Nuisance alarms (false alarms) | Cooking fumes, steam, high humidity, dust | Press the Test-Hush button to silence. Ventilate the area. Clean the smoke detector. |
| L'alarma no sona durant la prova | Dead or improperly installed battery, unit malfunction | Check battery installation. Replace battery. If issue persists, the unit may need replacement. |
| El LED vermell no parpelleja | Unit not receiving power or malfunction | Ensure battery is correctly installed. Test the unit. If no response, replace the unit. |
Per a una resolució de problemes més detallada, consulteu el servei oficial Guia de resolució de problemes (PDF) o el Guia de l'usuari (PDF).
Especificacions
Detailed specifications for the Kidde Fire Sentry Smoke Detector (Model i9040):
| Característica | Detall |
|---|---|
| Marca | Kidde |
| Número de model | i9040 |
| Estil | Battery Powered Smoke Detector |
| Font d'alimentació | Alimentat per bateria de 9 V |
| Color | Blanc |
| Dimensions del producte | 4 "P x 4" W x 1.45" H |
| Pes de l'article | 4.2 unces (120 grams) |
| Nivell de so d'alarma | 85 decibels |
| Tipus de sensor | Ionització |
| Humitat de funcionament | Fins a un 85% d'humitat relativa, sense condensació |
| Classificació de temperatura superior | 38 graus centígrads |
| Certificació | Llistat UL |
| UPC | 047871260560 |

Figure 5: Compact dimensions of the Kidde i9040 smoke detector.
Garantia i Suport
The Kidde Fire Sentry Smoke Detector (Model i9040) comes with a 3-year limited manufacturer's warranty on the alarm unit itself. This warranty covers defects in materials and workmanship from the date of purchase. Please note that the warranty does not cover battery performance.
For further assistance, technical support, or warranty claims, please refer to the official Manual d'usuari (PDF) or contact Kidde customer service directly.





