1. Introducció
Benvingut
Gràcies per la compraasing the ENDEAVOUR FIRES Castleton Electric Fireplace. This manual provides essential information for the safe and efficient operation of your new appliance. Please read these instructions thoroughly before installation and use, and retain them for future reference.
Informació important de seguretat
- Llegiu totes les instruccions abans d'utilitzar aquest aparell.
- No feu funcionar cap llar de foc amb el cable o l'endoll danyats, o si l'escalfador ha funcionat malament, s'ha caigut o s'ha fet malbé de qualsevol manera.
- Do not use outdoors. This fireplace is intended for indoor use only.
- Mantingueu els materials combustibles, com ara mobles, coixins, roba de llit, papers, roba i cortines com a mínim a 3 peus (0.9 m) de la part davantera de la llar de foc.
- Desendolleu sempre la llar de foc quan no la feu servir.
- No passeu el cable sota la catifa. No cobriu el cable amb catifes, corredors o revestiments similars. Col·loqueu el cable lluny de la zona de trànsit i on no s'ensopegui.
- To disconnect the fireplace, turn controls to off, then remove plug from outlet.
- Aquesta xemeneia està calenta quan s'utilitza. Per evitar cremades, no deixeu que la pell nua toqui superfícies calentes.
- Always use a grounded, fused electrical outlet.
- Assegureu-vos que la font d'alimentació voltagcoincideix amb l'etiqueta de classificació de l'aparell.
- The heater outlet is located at the front. Do not obstruct the heater outlet.
- This appliance is equipped with a safety cut-off device to prevent overheating. If the heater stops working, unplug the unit, wait 10-15 minutes, and then plug it back in.
2. Contingut del paquet
Carefully unpack all components and check against the list below. Ensure all items are present and undamaged before proceeding with assembly.
- Castleton Fireplace Surround (Off-White MDF)
- Electric Fire Unit with Log Effect Fuel Bed
- Comandament a distància multifunció
- AAA Batteries (2) for Remote Control
- Maquinari de muntatge (cargols, espigues, etc.)
- Manual d'instruccions
3. Muntatge i instal·lació
Abans de començar
Ensure you have sufficient space for assembly and that the chosen location for the fireplace meets the safety requirements outlined in Section 1.
Eines necessàries
- Tornavís Phillips
Passos de muntatge
- Assemble the Fireplace Surround: The surround is supplied flat-packed. Follow the detailed diagrams provided in the separate assembly guide (if included) or the general instructions to connect the MDF panels using the provided hardware. Ensure all connections are secure.
- Insert the Electric Fire Unit: Once the surround is assembled, carefully slide the electric fire unit into the designated opening from the front. Ensure it sits flush and is properly aligned within the surround.
- Secure the Fire Unit: Use the provided screws to secure the electric fire unit to the fireplace surround from the inside or designated attachment points.
Figura 1: posterior view of the electric fire unit, illustrating its compact design for easy insertion into the surround.
Consideracions de col·locació
- Place the assembled fireplace on a flat, stable surface.
- Ensure the power cable (1.7m length, right side) can reach a suitable grounded electrical outlet without being stretched or obstructed.
- Maintain adequate clearance from walls and other objects as specified in the safety information.
- The design allows for a television to be placed on top of the mantelpiece.
Figure 2: Dimensions of the Castleton fireplace surround (1000mm W x 830mm H x 275mm D).
Figure 3: The Castleton electric fireplace integrated into a modern living space.
4. Funcionament
The fireplace is operated using the supplied multi-function remote control.
Funcions de control remot
Figure 4: Multi-function remote control with LCD display.
- Botó d'engegada (encesa/apagada): Encén o apaga la unitat de xemeneia.
- Flame Effect Button: Activates or deactivates the flame effect. The intensity and brightness can be adjusted.
- Mood Lighting Select: Cycles through the 13 available ambient light colors or sets it to automatically transition between colors. Includes a dimming function.
- Heating/Advance (M): Activates the heater. Press to cycle between 1kW and 2kW heat settings.
- Thermostatic Sensor: The remote control includes a thermostatic sensor for accurate room temperature detection.
- Temporitzador: Sets the operational timer from 30 minutes up to 9 hours.
- Scroll Left/Right Arrows: Used to navigate through flame and lighting options on the LCD display.
- Fletxes amunt/avall: Adjusts flame intensity, heat levels, or light brightness.
- Botó enrere: Returns to the previous menu or setting.
Using the Thermostat and Programmer
The remote control allows for thermostatic control and 7-day programmable heating. Refer to the remote control's specific instructions for detailed programming steps to set desired temperatures and operating times.
5. Característiques clau
- Efecte de flama realista: Features an incredibly vivid flame effect with a molded log fuel bed, enhancing the ambiance of any room.
- 13 Colour Mood Lighting: Offers 13 ambient light color options, which can be set to a fixed color or cycle automatically. Includes a dimming function for customizable atmosphere.
Figura 5: Examples of the 13 available mood lighting colors.
- Funcionament independent: The flame effect and ambient lighting can be operated independently of the heating function, allowing for year-round use.
- Quiet Heater: Features a quiet heating operation with forward-facing output, providing warmth without significant noise.
- Eco-Design Compliant: Designed and manufactured to meet Eco-design 2018 (Lot 20) requirements for optimal energy efficiency.
- Tall de seguretat: Equipped with an automatic safety cut-off to prevent overheating.
6. Manteniment
Neteja
- Always unplug the fireplace from the power outlet before cleaning.
- Wipe the exterior surfaces of the fireplace surround with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Gently dust the electric fire unit's glass panel and log bed with a soft, dry cloth.
- Assegureu-vos que no entri humitat als components elèctrics.
Emmagatzematge
If storing the fireplace for an extended period, ensure it is clean, dry, and unplugged. Store in a cool, dry place, protected from dust and extreme temperatures.
7. Solució De Problemes
Abans de contactar amb l'atenció al client, consulteu la guia de resolució de problemes següent per conèixer els problemes més comuns.
| Problema | Causa possible | Solució |
|---|---|---|
| La llar de foc no s'encén. | Sense energia a la unitat. | Check if the power cord is securely plugged into a working electrical outlet. Check the circuit breaker. |
| Heater stops working. | Overheating safety cut-off activated. | Unplug the unit, wait 10-15 minutes for it to cool down, then plug it back in. Ensure the heater outlet is not obstructed. |
| El comandament a distància no respon. | Piles gastades o obstrucció. | Replace the AAA batteries in the remote control. Ensure there is no obstruction between the remote and the fireplace sensor. |
| L'efecte de flama no és visible o parpelleja. | Flame effect turned off or brightness too low. | Press the Flame Effect button on the remote. Adjust the flame brightness using the Up/Down arrows. |
8. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Marca | ENDEAVOUR FIRES |
| Número de model | E114R/115S |
| Nom del producte | Castleton Electric Fireplace |
| Color | Blanques |
| Fireplace Surround Dimensions (W x H x D) | 1000 mm x 830 mm x 275 mm (aprox. 39.4" x 32.7" x 10.8") |
| Electric Fire Unit Dimensions (W x H x D) | 600 mm x 434 mm x 210 mm (aprox. 23.6" x 17.1" x 8.3") |
| Pes | 36 quilos |
| Voltage | 220-240Vac, 50Hz |
| Sortida de calor | 1kW and 2kW selectable |
| Material | Fusta d'enginyeria (MDF) |
| Longitud del cable d'alimentació | 1.7 metres |
| Característiques especials | Safety Cut-off, Realistic Flame Effect, LED Flame, 13 Multi-color Flame/Mood Lighting, Adjustable Flame Brightness, Thermostatic Control, 7-Day Programmable Remote |
9. Garantia i Suport
Informació de la garantia
Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
Atenció al client
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact the retailer or manufacturer's customer support. Contact details can typically be found on the product packaging or the retailer's weblloc.
