Producte acabatview
The Aqua Control C4100 is a digital irrigation programmer designed to automate garden watering. It features an intuitive LCD screen and allows for precise control over watering frequency and duration. Constructed with high-quality materials, it ensures durability and efficient water flow. The removable front panel simplifies programming and maintenance.
Imatge: Frontal view of the Aqua Control C4100 irrigation programmer, showing the LCD screen and control buttons.
Característiques clau
- Digital Programming: Allows up to 8 watering starts per day with customizable frequency and duration.
- Pantalla LCD: Provides clear and easy-to-read programming information.
- Construcció d'alta qualitat: Made with durable materials for extended product life.
- Flux eficient: Features a large internal flow passage for optimal water delivery.
- Removable Front Panel: Simplifies battery replacement and programming access.
- Funciona amb piles: Requires one 9-volt alkaline battery (not included).
- Característica de seguretat: Automatic valve closure when battery is low to prevent water waste.
Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- 1 x Aqua Control C4100 Digital Irrigation Programmer
- Manual d'usuari (aquest document)
Note: A 9-volt alkaline battery is required for operation and is not included.
Configuració
1. Instal·lació de la bateria
- Gently slide the front panel of the programmer downwards and pull it away from the main unit.
- Localitzeu el compartiment de la bateria.
- Introduïu una pila alcalina nova de 9 volts, assegurant-vos de la polaritat correcta.
- Reattach the front panel by aligning it and sliding it upwards until it clicks into place.
Image: The Aqua Control C4100 with its front panel detached, illustrating the removable design for battery access.
2. Connecting to a Faucet
- Assegureu-vos que l'aixeta estigui tancada.
- Screw the programmer onto a standard 3/4" or 1" outdoor faucet. Hand-tighten only to prevent damage.
- Connect your garden hose or irrigation system to the outlet at the bottom of the programmer.
- Slowly turn on the faucet. The programmer is designed to operate between 1 and 7 bars of pressure.
Image: The Aqua Control C4100 irrigation programmer securely attached to an outdoor garden faucet, ready for use.
Instruccions de funcionament
Understanding the Display and Buttons
The LCD screen displays current time, programming status, and battery level. The buttons allow for navigation and setting adjustments:
- Man/Auto: Toggles between Manual and Automatic modes.
- Prog: Entra en mode de programació.
- Esc: Surt del menú actual o cancel·la una acció.
- Tiempo (Time): Adjusts time settings.
- Min (Minute): Adjusts minutes.
- Hora (Hour): Adjusts hours.
- Dia (Day): Adjusts day of the week or watering days.
- ON/AUTO/OFF: Selecciona el mode de funcionament.
Configuració de l’hora actual
- Premeu el botó prog botó.
- Utilitza el Hora i Min botons per configurar l'hora i els minuts actuals.
- Utilitza el Dia botó per configurar el dia actual de la setmana.
- Premeu prog de nou per guardar i sortir.
Programació d'horaris de reg
The C4100 allows for up to 8 independent watering programs per day.
- Premeu el botó prog button repeatedly until "P1" (Program 1) appears on the screen.
- Ús Hora i Min to set the desired start time for Program 1.
- Premeu prog. The display will show the duration setting. Use Temps, Hora, i Min to set the watering duration (e.g., 15 minutes).
- Premeu prog. The display will show the frequency setting. Use Dia to select watering days (e.g., every day, specific days of the week).
- Repeat steps 2-4 for additional programs (P2 to P8) as needed.
- After setting all desired programs, press Esc per sortir del mode de programació.
Funcionament manual
To manually turn the water on or off:
- Premeu el botó Man/Auto button to switch to Manual mode.
- Utilitza el ON/AUTO/OFF botó per seleccionar ON for continuous watering or OFF to stop watering.
- To return to automatic programming, press Man/Auto again and select AUTO.
Manteniment
- Substitució de la bateria: Replace the 9-volt battery annually or when the low battery indicator appears on the LCD screen. A low battery will automatically close the valve to prevent continuous water flow.
- Neteja de filtres: The programmer includes a metallic filter at the inlet. Periodically remove the programmer from the faucet and clean the filter to prevent debris buildup and ensure optimal water flow.
- Emmagatzematge d'hivern: During freezing temperatures, disconnect the programmer from the faucet and store it indoors in a dry, frost-free location. Water left inside the unit can freeze and cause damage.
- Neteja general: Wipe the exterior of the programmer with a damp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
Imatge: Primer pla view of the Aqua Control C4100's battery compartment, showing where the 9V battery is inserted.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No water flow / Valve not opening. | Low battery; Faucet turned off; Water pressure too low; Filter clogged. | Replace battery; Turn on faucet; Ensure water pressure is between 1-7 bar; Clean inlet filter. |
| Watering schedule not starting. | Programmer in OFF or Manual mode; Incorrect program settings; Battery low. | Set to AUTO mode; Verify program start times and days; Replace battery. |
| Water continuously flowing. | Programmer stuck in ON mode; Internal valve issue; Debris in valve. | Switch to OFF or AUTO mode; Disconnect and reconnect; Check for debris in valve (if accessible). If issue persists, contact support. |
| LCD screen is blank or dim. | Bateria baixa o baixa. | Substitueix la pila de 9 volts. |
Especificacions
| Característica | Detall |
|---|---|
| Model | C4100 |
| Font d'alimentació | 1 pila alcalina de 9 V (no inclosa) |
| Pressió de funcionament | 1 - 7 bar (15 - 100 PSI) |
| Caudal | Approximately 15 L/min |
| Programes de reg | Up to 8 starts per day |
| Tipus de visualització | LCD |
| Fil d'entrada | 3/4" and 1" (with adapter) |
| Material | Plàstic, metall |
| Dimensions (L x A x A) | 20 x 10 x 15 cm (7.87 x 3.94 x 5.91 polzades) |
| Pes | 380 grams (0.84 lliures) |
Garantia i Suport
The Aqua Control C4100 Garden Irrigation Programmer comes with a 2 any de garantia des de la data de compra, cobrint defectes de fabricació.
Aquesta garantia no cobreix els danys causats per:
- Instal·lació o ús incorrecte.
- Exposure to freezing temperatures.
- Reparacions o modificacions no autoritzades.
- Accidental damage or misuse.
For technical support, warranty claims, or replacement parts, please contact your retailer or the manufacturer directly. Please have your proof of purchase and product model number (C4100) ready when contacting support.
