Westinghouse 3W 120V Flicker Flame Decorative Bulb (Model 3CA8/FLK/CB) Instruction Manual

1. Producte acabatview

This manual provides instructions for the Westinghouse 3W 120V Flicker Flame Decorative Bulb, model 3CA8/FLK/CB. This incandescent bulb features a CA8 size and shape with an E12 candelabra base, designed to produce a decorative flicker flame effect with an orange light output. It operates at 3 Watts and 120 Volts, suitable for lower light level applications.

• Tipus de bombeta: Incandescent
• Tipus de base: E12 Canelobres
• Wattage: 3 watts
• Voltage: 120 Volts
• Característica especial: Flicker Flame effect, Dimmable
• Color clar: Taronja
• Vida estimada: Approximately 1.4 years based on 3 hours of daily use (3000 hours total average life)

2. Informació de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans d'instal·lar o utilitzar aquest producte. Si no segueix aquestes instruccions, es poden produir descàrregues elèctriques, incendis o altres perills.

• Apagar: Always turn off the power to the fixture at the circuit breaker or fuse box before installing, removing, or inspecting the bulb.
• Refredament: Deixeu que la bombeta es refredi completament abans de manipular-la. Les bombetes calentes poden causar cremades.
• Fixació adequada: Use this bulb only in fixtures rated for the specified wattage i voltage (3 W, 120 V).
• Lloc sec: This bulb is rated for outdoor usage, but ensure the fixture itself is suitable for the environment and protected from direct water exposure if used outdoors.
• Eliminació: Elimineu les bombetes usades d'acord amb la normativa local.
• Regulable: This bulb is dimmable. Ensure your dimmer switch is compatible with incandescent bulbs.

3. Configuració i instal·lació

Follow these steps to properly install your Westinghouse Flicker Flame Decorative Bulb:

1. Assegureu-vos que l'alimentació estigui apagada: Before beginning installation, verify that the power supply to the light fixture is turned off at the circuit breaker or wall switch.
2. Treure la bombeta antiga (si escau): If replacing an existing bulb, carefully unscrew it from the socket. Allow it to cool if it was recently in use.
3. Inspeccionar l'aparell: Revisa el portalàmpades del llum per si hi ha danys o restes. Assegura't que estigui net i sec.
4. Cargol de la bombeta nova: Gently screw the Westinghouse Flicker Flame Decorative Bulb into the E12 candelabra base socket. Turn clockwise until it is finger-tight. Do not overtighten.
5. Restaura l'alimentació: Once the bulb is securely installed, restore power to the fixture at the circuit breaker or wall switch.
6. Prova: Turn on the light switch to confirm the bulb is functioning correctly and producing the flicker flame effect.

Imatge 1: Lateral view of the Westinghouse Flicker Flame Decorative Bulb, showing the clear glass and internal flicker element.

Imatge 2: Primer pla view of the E12 candelabra screw base of the Westinghouse Flicker Flame Decorative Bulb.

4. Instruccions de funcionament

Operating this decorative bulb is straightforward:

• Funcionament estàndard: Simply use the wall switch or fixture switch to turn the light on or off.
• Funció d'atenuació: If installed in a compatible dimmable fixture with an appropriate dimmer switch, you can adjust the brightness of the flicker flame effect to your desired level.
• Flicker Effect: The bulb is designed to simulate a flickering candle flame, providing a warm, ambient orange light.

5. Manteniment

Minimal maintenance is required for this bulb:

• Neteja: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Substitució: When the bulb reaches the end of its operational life, it will cease to illuminate. Follow the installation steps (Section 3) to replace it with a new, compatible bulb.

6. Solució De Problemes

If your Westinghouse Flicker Flame Decorative Bulb is not functioning as expected, consider the following:

7. Especificacions

Detailed specifications for the Westinghouse 3W 120V Flicker Flame Decorative Bulb:

8. Garantia i Suport

For warranty information or technical support regarding your Westinghouse Flicker Flame Decorative Bulb, please refer to the official Westinghouse weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Atenció al client de Westinghouse: Si us plau, visiteu the Westinghouse Store on Amazon or the official Westinghouse weblloc web per obtenir dades de contacte i més ajuda.