Introducció
This manual provides comprehensive instructions for the installation, use, and maintenance of the Emtek 91033 3.5" x 3.5" Plain Bearing 5/8" Radius Corners Mortise Hinge. Please read these instructions carefully before proceeding with installation to ensure proper function and longevity of your product. Retain this manual for future reference.
Producte acabatview
The Emtek 91033 hinge is designed for residential and light commercial door applications. It features a plain bearing mechanism for smooth operation and 5/8" radius corners for compatibility with standard door preparations. This product is sold as a pair.
Imatge 1: Emtek 91033 3.5" x 3.5" Plain Bearing Mortise Hinge. This image displays the Emtek 91033 mortise hinge. It features two leaves connected by a central pin, with rounded corners and screw holes on each leaf. The finish appears to be a dark, brushed metal, identified as Tumbled White Bronze.
Característiques principals:
- Dimensions: 3.5 polzades (llargada) x 3.5 polzades (amplada)
- Tipus de rodament: Plain Bearing for reliable function
- Corner Type: 5/8 inch Radius Corners
- Material: Durable Stainless Steel construction
- Acabat: Unfinished (Color: Tumbled White Bronze)
- Muntatge: Muntatge de la porta
- Quantitat: Sold as a pair (2 pieces)
Instruccions d'instal·lació
Proper installation is crucial for the optimal performance and longevity of your hinges. If you are unsure about any step, it is recommended to consult a professional.
Eines necessàries:
- Llapis
- Cinta mètrica
- Cisell
- Martell
- Perforar amb broques adequades
- Tornavís (manual o elèctric)
- Ulleres de seguretat
Passos d'instal·lació:
- Preparació de la porta i el marc: Ensure that the door and door frame are properly prepared with mortises (recesses) that match the dimensions of the hinge leaves (3.5" x 3.5" with 5/8" radius corners). The depth of the mortise should allow the hinge leaf to sit flush with the surface.
- Marqueu els forats dels cargols: Place one hinge leaf into the prepared mortise on the door edge. Use a pencil to mark the locations for the screw holes. Repeat this for all hinges on the door.
- Perforar forats pilot: Using an appropriate drill bit (slightly smaller than the screw diameter), drill pilot holes at the marked locations. This prevents wood splitting.
- Fixeu les frontisses a la porta: Secure the hinge leaves to the door using the provided screws. Ensure the hinges are flush and firmly attached.
- Position Door: Carefully position the door within the door frame, aligning the hinges on the door with the mortises on the frame. Use shims if necessary to maintain proper spacing.
- Mark Frame Screw Holes: Once aligned, mark the screw holes on the door frame through the hinge leaves.
- Drill Pilot Holes (Frame): Drill pilot holes into the door frame at the marked locations.
- Attach Hinges to Frame: Secure the hinges to the door frame using the remaining screws.
- Prova de funcionament: Open and close the door several times to check for smooth operation and proper alignment. Adjust screws if necessary to achieve optimal performance.
Important: Always use appropriate safety gear, such as safety glasses, during installation.
Funcionalitat
The Emtek 91033 plain bearing hinge is designed for smooth and consistent door movement. Once properly installed, the hinge allows the door to pivot freely between its open and closed positions. No specific operational steps are required beyond normal door usage.
- Moviment suau: The plain bearing design ensures a consistent pivot action.
- Durabilitat: Constructed from stainless steel for long-lasting performance.
Manteniment
Regular maintenance can extend the life and ensure the smooth operation of your Emtek hinges.
- Neteja: Clean the hinges periodically with a soft, damp drap. Eviteu netejadors abrasius o productes químics agressius, ja que poden danyar l'acabat.
- Lubricació: For optimal performance, apply a small amount of silicone-based lubricant to the hinge pin and knuckles annually, or if squeaking occurs. Wipe off any excess lubricant.
- Cargols de tensió: Periodically check all mounting screws for tightness. Loose screws can lead to door sagging or improper operation. Tighten gently to avoid stripping the screw heads or wood.
- Inspecció: Inspect hinges for any signs of wear, damage, or corrosion. Replace hinges if significant damage is observed.
Resolució de problemes
Most issues with door hinges can be resolved with simple adjustments.
| Problema | Causa possible | Solució |
|---|---|---|
| La porta grinyola | Falta de lubricació | Apply silicone-based lubricant to hinge pins. |
| Door sags or rubs | Cargols de muntatge solts | Tighten all hinge mounting screws. |
| La porta no es tanca correctament | Desalineació durant la instal·lació | Check hinge alignment and adjust screws. Ensure mortises are correctly cut. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 91033 |
| Marca | Emtek |
| Dimensions (L x A) | 3.5 cm x 3.5 cm |
| Tipus de cantonada | 5/8" Radius |
| Tipus de rodament | Plain Bearing |
| Material | Acer inoxidable |
| Acabar | Unfinished (Tumbled White Bronze color) |
| Tipus de muntatge | Muntatge de la porta |
| Quantitat | Pair (2 pieces) |
| Número de part | 91033TWB |
Garantia i Suport
Informació de la garantia:
Emtek products are manufactured to high-quality standards. For specific warranty details regarding the Emtek 91033 hinge, please refer to the official Emtek website or contact Emtek customer service directly. Warranty terms typically cover manufacturing defects.
Atenció al client:
If you encounter any issues or have questions not covered in this manual, please contact Emtek customer support. You can usually find contact information on the official Emtek weblloc (www.emtek.com) or through your authorized Emtek dealer.
