Progress Lighting Helm Collection One-Light 11" LED Flush Mount Instruction Manual

Introducció

The Progress Lighting Helm Collection One-Light 11" LED Flush Mount fixture is a contemporary lighting solution designed for both ceiling and wall mounting. Featuring an acrylic diffuser with architectural details, this fixture provides efficient and stylish illumination. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture.

Informació important de seguretat

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Desconnecteu sempre l'alimentació a l'interruptor principal abans de la instal·lació o el manteniment.
• No instal·leu aquest aparell en llocs humits. Està dissenyat només per a ús interior.
• Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
• This fixture is designed for 120 Volts AC.
• No intenteu modificar l'aparell. Qualsevol modificació pot anul·lar la garantia i crear un perill per a la seguretat.
• La font de llum LED està integrada i no la pot substituir l'usuari.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Helm Collection LED Flush Mount Fixture (1)
• Kit de maquinari de muntatge (1)
• Installation Sheet (1)

Configuració i instal·lació

Follow these steps carefully to install your new fixture. It is recommended to have two people for installation.

Pas 1: prepareu-vos per a la instal·lació

1. Desconnecteu l'alimentació a l'interruptor o a la caixa de fusibles per evitar descàrregues elèctriques.
2. Remove the old fixture (if applicable) and disconnect all wiring.
3. Unpack the new fixture and its components. Keep all parts organized.

Pas 2: Muntar el dispositiu

Imatge: Frontal view of the 11-inch LED flush mount fixture in a brushed nickel finish, showcasing its square design and acrylic diffuser.

Image: Diagram showing the dimensions of the fixture, indicating an 11-inch width and 3-3/4 inch height.

4. Fixeu el suport de muntatge a la caixa de connexions amb els cargols proporcionats. Assegureu-vos que estigui ben fixat.
5. Connect the fixture's wires to the corresponding house wires:
   • Connect the black wire (Live) from the fixture to the black wire from the junction box.
   • Connect the white wire (Neutral) from the fixture to the white wire from the junction box.
   • Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire from the junction box.
   Use wire nuts to secure all connections and wrap them with electrical tape for added safety.
6. Introduïu amb cura tots els cables a la caixa de connexió.
7. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling or wall.

Pas 3: Finalitzeu la instal·lació

8. Restableix l'alimentació a l'interruptor principal.
9. Proveu l'aparell per assegurar-vos que funciona correctament.

Instruccions de funcionament

This LED flush mount fixture is designed for simple operation.

• Activació/desactivació: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
• Dimecres: This fixture is compatible with most standard dimmer switches. For optimal performance and to avoid flickering, use an LED-compatible dimmer switch. Consult your dimmer switch manufacturer's instructions for proper installation and operation.

Manteniment

To ensure the longevity and appearance of your fixture, follow these maintenance guidelines:

• Neteja: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic diffuser.
• Font de llum LED: The LED light source in this fixture is integrated and designed for long-term use. It is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced.
• Inspecció: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.

Resolució de problemes

Si teniu problemes amb el vostre dispositiu, consulteu els següents problemes i solucions habituals:

If the problem persists after trying these solutions, contact Progress Lighting customer support or a qualified electrician.

Especificacions

Garantia i Suport

This Progress Lighting fixture comes with a Garantia limitada de 5 anys. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your product, please contact Progress Lighting customer service.

També podeu visitar l'oficial Progress Lighting Store on Amazon per a més informació i ofertes de productes.