Introducció
The Ematic HL-101 XO Vision 2 Channel High to Low Converter is designed to integrate aftermarket amplifiers into vehicle audio systems that lack RCA pre-amp outputs. It converts high-level speaker outputs from your car stereo into low-level RCA signals, allowing for a clean audio signal to your amplifier. This unit also features a built-in 12V remote turn-on function.
Informació de seguretat
- Always disconnect the vehicle's battery before installation to prevent electrical shorts.
- Ensure all wiring connections are secure and properly insulated to avoid short circuits and damage to equipment.
- Mount the converter in a dry location, away from excessive heat, moisture, and moving parts.
- Consulteu un instal·lador professional d'àudio per a cotxes si no teniu cap dubte sobre alguna part del procés d'instal·lació.
Contingut del paquet
- Ematic HL-101 XO Vision 2 Channel High to Low Converter
- (Note: Additional items like wiring harnesses or mounting hardware may be included depending on the specific retail package.)
Producte acabatview
The HL-101 features a compact design with clear housing, allowing visibility of internal components. It includes RCA output jacks and a multi-wire harness for connections.
Figura 1: A dalt view of the Ematic HL-101 converter, showing the wiring harness and connection labels.
Figura 2: lateral view of the Ematic HL-101 converter, highlighting the RCA output jacks.
Configuració i instal·lació
Follow these steps for proper installation of your HL-101 converter:
- Desconnecta la bateria: Before starting, disconnect the negative terminal of your vehicle's battery.
- Identify Speaker Wires: Locate the speaker output wires from your car's head unit (stereo). Refer to your vehicle's wiring diagram if necessary.
- Connexions de cable: Connect the HL-101's input wires to the corresponding speaker wires from your head unit. Refer to the wiring diagram below and on the device label (Figure 1).
- Gris: RIGHT(+) Speaker Input
- Gris/negre: RIGHT(-) Speaker Input
- Blanc: LEFT(+) Speaker Input
- Blanc / Negre: LEFT(-) Speaker Input
- groc: 12V (Battery) Power Input
- Negre: TERRA
- Blau: 12V Remote Output (to amplifier's remote turn-on input)
- Energia i terra: Connect the Yellow wire to a constant 12V power source (e.g., directly to the battery with an inline fuse, or a fused accessory wire). Connect the Black wire to a good chassis ground point.
- Sortida RCA: Connect RCA cables from the HL-101's RCA output jacks (Figure 2) to the RCA input jacks on your aftermarket ampmés viu.
- Encès remot: Connect the Blue wire from the HL-101 to the remote turn-on input of your amplifier. This will turn on your amplifier when the head unit is powered on.
- Cablejat segur: Ensure all connections are soldered or crimped securely and insulated with electrical tape or heat shrink tubing.
- Mount Converter: Securely mount the HL-101 in a suitable location, ensuring it is not exposed to excessive heat or moisture.
- Torneu a connectar la bateria: Once all connections are verified, reconnect the negative terminal of your vehicle's battery.
Funcionament
The Ematic HL-101 automatically converts the high-level speaker signals to low-level RCA outputs. The unit features a single dial for level matching. Adjust this dial to achieve a balanced audio output between your head unit and amplifier, ensuring optimal sound quality without distortion.
The built-in 12V remote turn-on feature will automatically activate your amplifier when your car's head unit is turned on, eliminating the need for a separate remote wire from the head unit.
Manteniment
The Ematic HL-101 requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they remain secure and free from corrosion. Avoid exposing the unit to extreme temperatures or moisture.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so ampmés viu | No power to HL-101; Incorrect wiring; AmpEl lifer no s'encén. | Check 12V (Yellow) and Ground (Black) connections. Verify speaker input wires (Gray, Gray/Black, White, White/Black) are correctly connected. Ensure Blue remote wire is connected to amplificador i ampEl lificador està rebent energia. |
| So distorsionat | Input level too high; Improper gain settings on ampmés viu. | Adjust the level dial on the HL-101. Reduce the gain settings on your amplifier. Ensure speaker wires are not reversed (+/-). |
| Engine noise/whine | Interferència del bucle de terra. | Ensure the HL-101's ground wire is connected to a clean, solid chassis ground. Check for proper grounding of all audio components. |
Especificacions
- Model: HL-101
- Marca: Emàtica
- Nombre de canals: 2
- Volum de subministrament màximtage: 12 Volts
- Tecnologies de connectivitat: RCA
- Material: Alumini (carcassa)
- Dimensions del producte (L x A x A): 6.2 x 3.75 x 1 polzades
- Pes de l'article: 0.352 unces
Garantia i Suport
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Ematic weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
