AMS F5962

AMS F5962 Radio-Controlled Wall Clock User Manual

Model: F5962

1. Introducció

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Producte acabatview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Figura 1: Frontal view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Contingut del paquet

Please check the package contents upon unpacking. Ensure all items are present and undamaged.

4. Configuració

4.1 Instal·lació de la bateria

  1. Localitzeu el compartiment de la bateria a la part posterior del rellotge.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Tanqueu bé la tapa del compartiment de la bateria.

Important: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Initial Time Synchronization

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Col·loca el rellotge a prop d'una finestra o en una zona oberta, allunyat de dispositius electrònics que puguin causar interferències.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Nota: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Muntatge del rellotge

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Instruccions de funcionament

Once set up, the AMS F5962 operates automatically.

6. Manteniment

6.1 Neteja

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

6.2 Substitució de la bateria

Quan les agulles del rellotge deixen de moure's o l'hora esdevé inexacta, probablement és hora de substituir la pila.

  1. Traieu la bateria antiga del compartiment.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Nota ambiental: Please dispose of used batteries responsibly according to local regulations.

7. Solució De Problemes

ProblemaCausa possibleSolució
Les agulles del rellotge no es mouen ni s'aturen.Bateria esgotada.Substituïu la bateria per una de nova.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Interferències d'altres aparells electrònics.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Assegureu-vos que la bateria estigui nova.
L'hora és incorrecta després del canvi d'horari d'estiu.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Especificacions

MarcaAMS
Número de modelF5962
Tipus de visualitzacióAnalògic
Característica especialRadio-Controlled Time Synchronization
MaterialMetal Pintat
ColorBeige (dial), Brown (housing)
EstilAntiguitat
Dimensions del producte35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Pes de l'article1.22 kg
Font d'alimentacióFunciona amb bateria
Ús interior/exteriorInterior

9. Garantia i Suport

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS weblloc per obtenir més ajuda.

Documents relacionats - F5962

Preview Manual d'usuari del rellotge radiocontrolat AMS 5898 / 5893
Instruccions detallades per configurar i utilitzar els rellotges radiocontrolats AMS 5898 i AMS 5893, incloent-hi la configuració de l'hora, les funcions d'alarma, la visualització de la temperatura i el manteniment.
Preview Instruccions d'ús del rellotge de paret AMS
Instruccions d'ús per als rellotges de paret AMS, que cobreixen la instal·lació, la substitució i l'ús general de les piles en diversos idiomes.
Preview Manual del kit d'avaluació de la placa adaptadora ams AS5600L
Aquest manual proporciona informació completa per a la placa adaptadora ams AS5600L-WL_EK_AB, incloent-hi el contingut del kit, la descripció de la placa, les instruccions de muntatge, els detalls de les connexions, el funcionament en mode I2C, els esquemes de maquinari, el disseny de la placa de circuit imprès i la informació de comanda.
Preview Manual d'usuari del sensor de posició rotatiu de 14 bits ams AS5048
Aquest manual d'usuari proporciona informació detallada sobre l'ams AS5048, un sensor de posició rotatiu de 14 bits amb angle digital i sortida PWM. Cobreix la placa adaptadora AS5048, el muntatge, el pinout, els casos d'operació (SPI, Daisy Chain), la codificació de firmware, ex.ampfitxers i esquemes de maquinari. Essencial per als enginyers que integren aquest sensor als seus sistemes.
Preview Manual del kit d'avaluació de la placa adaptadora ams AS5048
Aquest manual detalla la placa adaptadora ams AS5048 (AS5048-EK-AB), un kit d'avaluació per al sensor de posició magnètica AS5048. Cobreix el maquinari, els modes de funcionament (SPI, I2C), el programari i altres ex.amples i informació de contacte d'ams AG.
Preview Instruccions d'ús del rellotge AMS i guia de substitució de piles
Instruccions per al funcionament i la substitució de la pila dels rellotges AMS, amb guia multilingüe.