1. Introducció
The Silverstone SG13B-V1 is a compact Mini-ITX computer chassis designed to accommodate standard components within an 11.5-liter volume. This manual provides essential information for the proper assembly, operation, and maintenance of your computer case.
2. Producte acabatview
Figura 1: Part frontal view of the Silverstone SG13B-V1 computer case.
The SG13B-V1 features a mesh front panel for optimized airflow and a compact design suitable for various computing environments, from general purpose to enthusiast builds. It supports a range of standard components, including long expansion cards, ATX power supplies, and all-in-one liquid coolers.
Característiques principals:
- Support for standard-length expansion cards (up to 10.5 inches).
- Mini-DTX / Mini-ITX motherboard and ATX PSU compatibility.
- Support for 120mm or 140mm single fan All-in-One Liquid Coolers.
- Support for 2.5" and 3.5" hard drives.
- Elevated standoff for motherboard back side components.
3. Especificacions
| Característica | Detall |
|---|---|
| Número de model | SG13B-V1 |
| Dimensions (LxWxH) | 7.13 x 11.22 x 8.74 polzades |
| Pes | 5.4 lliures |
| Compatibilitat amb la placa base | Mini-DTX / Mini-ITX |
| Suport d'alimentació | ATX (Bottom Mount) |
| Expansion Card Length | Fins a 10.5 polzades |
| Liquid Cooler Support | 120mm or 140mm (single fan AIO) |
| Drive Bays | 2.5" and 3.5" hard drives |
| Ports d'E / S frontals | 2x USB 2.0, 2x USB 3.0 |
| Material | Mesh, Steel |
Figure 2: Detailed dimensions of the SG13B-V1 chassis.
4. Configuració i instal·lació
This section guides you through the process of installing components into your Silverstone SG13B-V1 case. Always ensure the system is powered off and unplugged before handling internal components.
4.1. Preparació del cas
- Remove the side panels by unscrewing the thumbscrews at the rear and sliding the panels off.
- Familiaritzeu-vos amb la distribució interna, incloent-hi la safata de la placa base, les badies d'unitats i els suports dels ventiladors.
Figure 3: Internal layout of the SG13B-V1, showing component areas.
4.2. Instal·lació de la placa base
- Instal·leu la protecció d'E/S al retall de la placa base a la part posterior de la carcassa.
- Align your Mini-ITX or Mini-DTX motherboard with the standoffs and secure it with screws. The elevated standoffs provide space for back-side components.
4.3. Instal·lació de la font d'alimentació (PSU)
- Mount your standard ATX power supply into its designated position, typically at the bottom front of the case.
- Route the necessary power cables through the case for connection to your components.
4.4. Instal·lació de la targeta gràfica (GPU)
- Remove the necessary PCI-E slot covers at the rear of the case.
- Insert your graphics card (up to 10.5 inches in length) into the PCI-E slot on the motherboard and secure it with a screw.
Figura 4: Example of a graphics card installed within the chassis.
4.5. Drive Installation (2.5" and 3.5" HDDs/SSDs)
- Locate the available 2.5" and 3.5" drive bays.
- Secure your hard drives or solid-state drives into the bays using the provided screws.
- Connect SATA power and data cables to each installed drive.
4.6. Cooling System Installation (Fans/AIO Liquid Cooler)
- Install any additional case fans (e.g., 120mm or 140mm) into the designated mounting points.
- If using an All-in-One (AIO) liquid cooler, mount the 120mm or 140mm radiator and fan(s) to the appropriate internal bracket.
4.7. Gestió de cables
Carefully route all cables to ensure optimal airflow and a tidy interior. Use cable ties or Velcro straps to bundle and secure cables away from moving parts and airflow paths.
Vídeo 1: Producte acabatview Video for a similar computer case, demonstrating internal component layout and assembly concepts. This video is provided by Amazon Product Imaging.
5. Instruccions de funcionament
Once all components are installed and secured, connect your peripherals (monitor, keyboard, mouse, etc.) and the power cable to the PSU. Power on your system using the power button on the front panel. Refer to your motherboard and component manuals for specific operating instructions.
6. Manteniment
Un manteniment regular ajuda a garantir la longevitat i el rendiment òptim del vostre sistema informàtic.
6.1. Neteja del filtre de pols
The mesh front panel acts as a dust filter. Periodically remove the front panel and gently clean any accumulated dust using compressed air or a soft brush. Ensure the system is powered off before cleaning.
6.2. Neteja interior
Every few months, open the case and use compressed air to remove dust from internal components, especially fans, heatsinks, and power supply vents. Avoid touching components directly.
7. Solució De Problemes
If you encounter issues with your system, consider the following common troubleshooting steps:
- Sense energia: Assegureu-vos que tots els cables d'alimentació (de la font d'alimentació a la paret, de la font d'alimentació a la placa base, de la CPU i de la GPU) estiguin connectats correctament. Comproveu l'interruptor d'alimentació de la font d'alimentació.
- Sense pantalla: Verify that your monitor is connected to the graphics card (not the motherboard integrated graphics, unless you are not using a dedicated GPU). Reseat the graphics card and RAM modules.
- Sobreescalfament: Check fan connections and ensure they are spinning. Clean dust filters and internal components. Verify proper thermal paste application on the CPU cooler. Ensure adequate airflow within the case.
- Component no detectat: Reseat the component (e.g., RAM, GPU, storage drive). Check all power and data connections.
8. Garantia i Suport
For warranty information, please refer to the documentation provided with your purchase or visit the official SilverStone website. For technical support, contact SilverStone customer service directly.
