TOTO WASHLET C200 Electronic Bidet Toilet Seat User Manual

1. Introducció

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your TOTO WASHLET C200 Electronic Bidet Toilet Seat. Please read this manual thoroughly before using the product and retain it for future reference.

The TOTO WASHLET C200 is designed to provide a comfortable and hygienic cleansing experience with features such as warm water washing, a heated seat, air deodorizer, warm air dryer, and PREMIST technology. This model is an elongated electric bidet toilet seat.

2. Informació de seguretat

Always follow basic safety precautions when using electrical products, especially when children are present. To reduce the risk of burns, electrocution, fire, or injury to persons:

• Assegureu-vos que el producte està correctament connectat a terra.
• No submergiu el producte en aigua o altres líquids.
• No l'utilitzeu si el cable o l'endoll estan danyats.
• Mantingueu el cable d'alimentació lluny de superfícies escalfades.
• Desendolleu el producte abans de netejar-lo o fer-ne el servei.
• Installation must comply with all local plumbing and electrical codes. A Ground Fault Circuit Interrupter (GFCI) outlet is required.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• TOTO WASHLET C200 Electronic Bidet Toilet Seat
• Suport de muntatge
• Wireless Remote control with batteries
• Tee-connector
• Mànega de subministrament d'aigua
• Installation hardware (screws, washers)

Image: TOTO WASHLET C200 Electronic Bidet Toilet Seat with its wireless remote control.

4. Instal·lació

This section outlines the steps for installing your WASHLET C200. Refer to the included installation video for visual guidance.

4.1 Comprovacions prèvies a la instal·lació

• Ensure you have a Ground Fault Circuit Interrupter (GFCI) 120V outlet within 3 feet of the toilet.
• Confirm your toilet is an elongated type for proper fit.

Image: Diagram illustrating the dimensions for elongated and round toilet seats, indicating proper fit for elongated models.

4.2 Removing the Old Toilet Seat

1. Using a screwdriver, remove the bolts securing the old toilet seat.
2. Lift and remove the old toilet seat.
3. Clean the surface around the mounting holes on the toilet bowl.

4.3 Instal·lació del suport de muntatge

1. Insert the mounting bolts into the toilet's mounting holes.
2. Place the WASHLET mounting bracket over the bolts.
3. Lightly tighten the screws to allow for minor adjustments.

4.4 Attaching the WASHLET Seat

1. Slide the WASHLET seat onto the mounting bracket until it clicks into place.
2. Adjust the seat position to ensure it is centered on the toilet bowl.
3. Remove the WASHLET seat from the bracket.
4. Fully tighten the mounting bracket screws.
5. Re-attach the WASHLET seat to the now secured mounting bracket.

Image: TOTO WASHLET C200 Electronic Bidet Toilet Seat with the lid open, showing the internal components.

4.5 Connexió d'aigua

1. Shut off the water supply to the toilet at the wall valve.
2. Rentar el vàter per alleujar la pressió de l'aigua.
3. Disconnect the existing water supply tube from the toilet tank's fill valve.
4. Install the provided T-connector onto the toilet tank's fill valve. Hand-tighten only to avoid cross-threading.
5. Connect the toilet's original water supply tube to the bottom of the T-connector.
6. Connect the WASHLET's water supply hose (white hose with grey tip) to the side of the T-connector. Ensure the O-ring is properly seated and hand-tighten.
7. Slowly turn on the water supply at the wall valve and check for leaks.

4.6 Connexió elèctrica

1. Plug the WASHLET's power cord into the GFCI outlet.
2. Turn on the power using the button on the left side of the WASHLET unit. The LED lights will illuminate, indicating power is on.

4.7 Vídeos d'instal·lació

5. Instruccions de funcionament

The WASHLET C200 is operated using the wireless remote control. Ensure batteries are installed in the remote.

5.1 Basic Cleansing Functions

• Neteja posterior: Activates a soft rear spray for posterior washing.
• Neteja frontal: Activates a gentle front spray for feminine washing.
• Oscillating Spray: The wand moves back and forth for a wider cleansing area.
• Pulsating Spray: The water stream pulsates for a massage-like effect.
• Ajust de pressió d'aigua: Use the '+' and '-' buttons to increase or decrease water pressure (five settings).
• Ajust de la posició de la vareta: Use the position arrows to adjust the wand's projection.

5.2 Característiques de confort

• Seient calefactat: Adjust the seat temperature using the remote (five settings).
• Assecador d'aire calent: Activates a warm air stream for drying (three temperature settings).
• Desodoritzador d'aire: Neutralizes bathroom odors using powerful air filters.

5.3 Personalized Settings

• The remote allows users to control and set personalized water cleansing settings.
• Two user memory settings are available for quick access to preferred settings.

6. Manteniment

6.1 PREMIST Function

The PREMIST function automatically sprays the toilet bowl with water before each use. This helps prevent waste buildup and keeps the bowl cleaner. This feature operates automatically when the seat sensor detects a user.

6.2 Vareta autonetejable

The cleansing wand is self-cleaning. It automatically cleans itself inside and outside before and after every use, ensuring hygiene.

6.3 Neteja general

To clean the exterior of the WASHLET, use a soft, damp cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads, as these can damage the finish. Always unplug the unit before cleaning.

7. Solució De Problemes

If you encounter issues with your WASHLET C200, refer to the following common problems and solutions:

• Sense energia: Ensure the unit is properly plugged into a working GFCI outlet and the power button on the unit is pressed. Check your circuit breaker.
• Sense aigua en esprai: Confirm the water supply valve is fully open. The WASHLET features a seat sensor; ensure you are seated or apply pressure to the seat sensor area to activate the spray.
• Fuites d'aigua: Check all water connections (T-connector, supply hoses) for tightness. Ensure washers are correctly seated. Do not overtighten plastic nuts.
• Water Pressure Too Low/High: Adjust the water pressure settings using the remote control.
• El seient calefactat no funciona: Check the temperature settings on the remote. Ensure the unit has power.
• Wand Not Extending: The wand extends only when the seat sensor is activated. Ensure the unit has power and the seat sensor is engaged.

For further assistance, please contact TOTO customer support.

8. Especificacions

9. Garantia i Suport

Your TOTO WASHLET C200 (Model SW2044#01) comes with a Manufacturer One Year Limited Warranty.

For technical support, troubleshooting assistance, or warranty claims, please contact TOTO customer service:

• Phone: 1-888-295-8134 (press 4 when prompted)
• Weblloc: washlet.com

Please have your model number (SW2044#01) and date of purchase available when contacting support.