Craftmade UCI-Remote Universal Remote Control

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Craftmade UCI-Remote Universal Remote Control. This remote is designed to provide convenient control over compatible Craftmade ceiling fans, allowing for adjustment of fan speeds and light functions.

Please read this manual thoroughly before attempting to install or operate the remote control to ensure proper function and safety.

2. Producte acabatview

Figure 1: Craftmade UCI-Remote Universal Remote Control Handset

This image displays the front of the Craftmade UCI-Remote. It is a black, elongated remote control with a central panel containing several oval-shaped buttons. From top to bottom, the buttons on the left column are labeled "HIGH", "MED", "LOW", and "OFF". On the right column, there are buttons labeled "L-1", "L-2", and "REV". Below these buttons, the word "Craftmade" is prominently displayed. At the very bottom of the central panel, there is a small horizontal slider switch.

2.1 Característiques clau

• Designed for use with select Craftmade fans only.
• Requires a compatible receiver to function (receiver not included).
• Provides 3-speed fan control (High, Medium, Low).
• Includes light control functions (L-1, L-2).
• Features a reverse function for fan direction.
• Acabat negre elegant.

3. Contingut del paquet

The Craftmade UCI-Remote package includes:

• Craftmade UCI-REMOTE Handset (1 unit)

Note: Batteries are not included and must be purchased separately. A compatible fan receiver is also required for operation and is not included with this handset.

4. Configuració i instal·lació

4.1 Instal·lació de la bateria

1. Localitzeu la tapa del compartiment de la bateria a la part posterior del comandament a distància.
2. Feu lliscar o desenganxeu la tapa per obrir el compartiment.
3. Insert the required batteries (typically AAA or 9V, refer to the remote's internal label if present) ensuring correct polarity (+/-).
4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

4.2 Pairing with Fan Receiver

This remote control must be paired with a compatible Craftmade fan receiver (e.g., Model UC7224T, if applicable) for proper operation. The pairing process typically involves setting DIP switches on both the remote and the receiver to match, or a learning function. Refer to your fan receiver's instruction manual for specific pairing procedures.

General Pairing Steps (May Vary by Receiver Model):

1. Assegureu-vos que l'alimentació del ventilador de sostre estigui DESCONNECTADA a l'interruptor.
2. Access the DIP switches on both the remote control (often inside the battery compartment) and the fan receiver.
3. Set the DIP switches on both devices to an identical pattern. Ensure no other remote in the vicinity uses the same pattern to avoid interference.
4. Restore power to the ceiling fan at the circuit breaker.
5. Within 30 seconds of restoring power, press and hold the "OFF" button on the remote control for approximately 5 seconds until the fan or light responds, indicating successful pairing.

If pairing is unsuccessful, repeat the steps, ensuring the DIP switch settings are identical and the timing is correct.

5. Instruccions de funcionament

Once the remote control is paired with your fan receiver, you can operate your ceiling fan and light using the buttons on the handset:

• ALTA: Estableix la velocitat del ventilador a alta.
• MED: Estableix la velocitat del ventilador a mitjana.
• BAIX: Estableix la velocitat del ventilador a baixa.
• DESACTIVAT: Apaga el ventilador.
• L-1: Controls light function 1 (e.g., turns light on/off, or adjusts brightness).
• L-2: Controls light function 2 (if applicable, e.g., a second light kit or dimming).
• REV: Reverses the direction of the fan blades (typically for seasonal use: clockwise for winter, counter-clockwise for summer).

Note: The exact functionality of light buttons (L-1, L-2) may depend on the specific fan and receiver model. Some may offer dimming by holding the button.

6. Cura i Manteniment

To ensure the longevity and optimal performance of your Craftmade UCI-Remote, follow these simple maintenance guidelines:

• Neteja: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
• Substitució de la bateria: Replace batteries promptly when the remote's range decreases or it becomes unresponsive. Always use the recommended battery type.
• Emmagatzematge: If storing the remote for an extended period, remove the batteries to prevent leakage and corrosion. Store in a cool, dry place.
• Eviteu la humitat: Mantingueu el comandament a distància allunyat de l'aigua i de la humitat elevada.
• Eviteu temperatures extremes: No exposeu el comandament a distància a calor o fred extrems.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For information regarding product warranty, technical support, or replacement parts, please contact Craftmade customer service or visit the official Craftmade weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

Craftmade Contact Information:

• Weblloc: www.craftmade.com (Exampl'enllaç, l'enllaç real pot variar)
• Customer Service: Refer to the website for current contact numbers or email.