Lightolier OHR3W Onset Remote Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the Lightolier OHR3W Onset Remote. This device is designed for multi-location 3-way control of compatible Onset dimmers, operating at 120VAC, 60Hz. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informació important de seguretat

Seguiu sempre les precaucions de seguretat bàsiques quan instal·leu o utilitzeu productes elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.

• ADVERTIMENT: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing.
• This product must be installed by a qualified electrician in accordance with all national and local electrical codes.
• Do not use this device with any load that exceeds its specified ratings.
• Assegureu-vos que totes les connexions dels cables estiguin segures i correctament aïllades.
• Do not attempt to modify or repair this device. Refer all servicing to qualified personnel.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Lightolier OHR3W Onset Remote (White)
• Manual d'instruccions (aquest document)

Image 3.1: The Lightolier OHR3W Onset Remote in its retail packaging. The box displays the model number OHR3W, indicating it is an Onset Remote for multi-location 3-way control of Onset dimmers, operating at 120VAC 60Hz.

4. Producte acabatview

The Lightolier OHR3W is a multi-location remote control designed to work in conjunction with Lightolier Onset dimmers. It enables 3-way control, allowing you to operate a single lighting load from two or more locations. The remote features a push-button actuator for intuitive control.

Imatge 4.1: Frontal view of the Lightolier OHR3W Onset Remote. It features a clean, white finish with a central push-button switch for controlling compatible dimmers in a multi-location setup.

5. Guia d'instal·lació

Professional installation by a qualified electrician is strongly recommended for this product. Ensure power is OFF at the circuit breaker before proceeding.

1. Apagueu l'alimentació: Locate the circuit breaker or fuse that supplies power to the switch box where the remote will be installed. Turn off the power completely. Verify power is off using a voltage provador.
2. Remove Existing Switch (if applicable): Traieu amb cura la placa de paret existent i l'interruptor de la caixa de paret. Desconnecteu els cables.
3. Connexions de cablejat: The OHR3W remote is designed for 3-way circuit configurations. Connect the remote according to the wiring diagram provided with your compatible Lightolier Onset dimmer. Typically, this involves connecting traveler wires and a ground wire. The remote uses screw terminals for secure connections.
4. Muntatge: Carefully fold the wires into the wall box. Secure the OHR3W remote to the wall box using the provided screws.
5. Instal·leu la placa de paret: Attach a standard decorator-style wall plate (not included) over the remote.
6. Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor.

Refer to the wiring instructions included with your Lightolier Onset dimmer for specific wiring diagrams and compatibility details.

6. Instruccions de funcionament

The Lightolier OHR3W Onset Remote provides simple push-button control for your lighting in a multi-location setup.

• Control d'encesa/apagada: Press the top or bottom of the rocker switch to turn the connected lights ON or OFF.
• Control d'atenuació: When paired with a compatible Onset dimmer, pressing and holding the top or bottom of the rocker switch will typically adjust the light level up or down, respectively. Release the button when the desired brightness is reached.
• Multi-Location Functionality: This remote works in conjunction with a primary Onset dimmer, allowing you to control the same lights from multiple wall locations.

7. Cura i Manteniment

The Lightolier OHR3W Onset Remote requires minimal maintenance.

• Neteja: To clean the surface, wipe with a soft, damp drap. No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat.
• Inspecció: Periodically inspect the remote and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.

8. Solució De Problemes

If you experience issues with your Lightolier OHR3W Onset Remote, consider the following:

• Llums que no responen:
  • Assegureu-vos que l'alimentació estigui activada a l'interruptor.
  • Verify all wiring connections are secure and correct according to the dimmer's instructions.
  • Confirm the remote is properly paired or connected to a compatible Lightolier Onset dimmer.
• Funcionament intermitent:
  • Comproveu si hi ha connexions de cablejat soltes.
  • Ensure the remote is not exposed to excessive moisture or extreme temperatures.
• Remote Feels Loose:
  • Tighten the mounting screws securing the remote to the wall box.

If issues persist after troubleshooting, contact a qualified electrician or Lightolier customer support.

9. Especificacions tècniques

10. Garantia i Suport

Lightolier products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Lightolier weblloc web. Conserveu el rebut de compra com a comprovant de compra.

For technical assistance or customer support, please contact Lightolier customer service through their official channels.