Introducció
The BIOS Professional Wireless Meat Thermometer is designed to accurately measure the internal temperature of various meats during cooking. It features a wireless monitor that receives temperature readings from a stainless steel probe, allowing you to monitor your food from a distance. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Image: The BIOS Professional Wireless Meat Thermometer, showing the main display unit, the stainless steel probe connected by a wire, and the base unit.
Components del producte
Your BIOS Professional Wireless Meat Thermometer package includes the following components:
- Wireless Display Unit: The main unit with a digital screen for displaying temperature and timer.
- Sonda d'acer inoxidable: A durable probe designed to be inserted into meat for temperature measurement.
- Cable de la sonda: Connects the stainless steel probe to the display unit.
- Base Unit/Stand: Provides stability for the display unit and may house the wireless transmitter.
- Clip de cinturó: Located on the back of the display unit for easy portability.
Imatge: Un primer pla view of the stainless steel meat probe and its connecting cable.
Configuració
- Instal·lació de la bateria:
Locate the battery compartment on the back of the wireless display unit. Insert the required batteries (typically AAA, not included) ensuring correct polarity (+/-). Close the battery compartment securely.
Image: The rear side of the thermometer, displaying the battery compartment cover and the integrated belt clip.
- Connexió de la sonda:
Insert the jack end of the stainless steel probe cable firmly into the designated port on the side of the wireless display unit. Ensure a secure connection for accurate readings.
- Encès:
Slide the ON/OFF switch, usually located on the back or side of the unit, to the "ON" position. The display should illuminate.
Instruccions de funcionament
1. Selecting Meat Type and Doneness (Pre-programmed Settings)
- Premeu el botó CARN button to cycle through different meat types (e.g., Beef, Poultry, Pork, Fish).
- Once the desired meat type is selected, press the GUST button to select the desired doneness level (e.g., Rare, Medium, Well Done). The target temperature will automatically adjust based on your selection.
2. Manual Temperature Setting
If you prefer to set a custom target temperature:
- Premeu el botó MODE button until the target temperature setting is highlighted or blinking.
- Utilitza el MIN i SEC buttons (or up/down arrows if present) to adjust the target temperature to your desired value.
- Premeu MODE again to confirm the setting or to exit the setting mode.
3. Ús de la funció de temporitzador
The thermometer includes a count up/down timer:
- To set a countdown timer: Premeu el botó MIN i SEC buttons to set the desired time. Press INICI/PARA per començar.
- To use as a count-up timer: Ensure the timer is at 0:00, then press INICI/PARA.
- Premeu CLAR per reiniciar el temporitzador.
4. Inserting the Probe
Carefully insert the stainless steel probe into the thickest part of the meat, avoiding bones or gristle. Ensure the probe tip is fully embedded for accurate internal temperature readings.
5. Monitoring Temperature and Alarm
The current internal temperature of the meat will be displayed on the screen. When the meat reaches the set target temperature, an alarm will sound to notify you. The wireless range is approximately 30 meters (100 feet), allowing you to monitor from a distance.
Image: The wireless display unit shown clipped to a jeans pocket, demonstrating its portability during use.
Manteniment
- Neteja de la sonda: After each use, carefully clean the stainless steel probe with warm, soapy water. Wipe thoroughly with a damp drap i assecar completament. Do not immerse the probe cable or the display unit in water. The product care instructions specify "Hand Wash Only" for the probe.
- Neteja de la unitat de visualització: Wipe the display unit with a soft, damp tela. No utilitzeu netejadors abrasius ni submergiu en aigua.
- Emmagatzematge: Guardeu el termòmetre i la sonda en un lloc net i sec quan no els feu servir.
- Substitució de la bateria: Replace batteries when the display becomes dim or the unit stops functioning correctly. Remove batteries if storing for extended periods to prevent leakage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense pantalla o pantalla tènue | Piles baixes o gastades; instal·lació incorrecta de la bateria. | Replace batteries with new ones; Check battery polarity. |
| Lectures de temperatura inexactes | Probe not fully inserted; Probe tip touching bone/gristle; Damaged probe or cable. | Re-insert probe into thickest part of meat, away from bones; Inspect probe and cable for damage. If damaged, replace probe. |
| No hi ha connexió sense fils | Out of range; Obstructions between units; Interference. | Move display unit closer to the probe; Reduce obstructions; Avoid strong electromagnetic sources. |
| L'alarma no sona | Alarm function not enabled; Volume too low. | Ensure alarm is activated in settings; Check for volume controls if available. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 4745928 |
| Marca | Bios |
| Tecnologia de connectivitat | Sense fil |
| abast sense fils | Fins a 30 m (100 peus) |
| Tipus de visualització | Digital |
| Material | Stainless Steel (Probe), Plastic (Unit) |
| Característiques especials | Temperature Alarm, Count up/down timer, Pre-programmed settings, Manual temperature setting, Easy-Use Belt Clip |
| Dimensions del producte | 5.08 x 6.6 x 13.51 cm (aprox. 2 x 2.6 x 5.3 polzades) |
| Pes de l'article | 185 g (aprox. 0.4 lliures) |
| Font d'alimentació | Bateria |
Garantia i Suport
For information regarding warranty coverage, product support, or to purchase replacement parts, please refer to the manufacturer's official weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Manufacturer: Thermor LTD
