1. Introducció
Thank you for choosing the Sauter SPI4362B Induction Hob. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read these instructions carefully before use and keep them for future reference.
2. Informació de seguretat
To prevent personal injury or damage to the appliance, observe the following safety precautions:
- Assegureu-vos que l'aparell l'instal·li un tècnic qualificat d'acord amb la normativa local.
- Do not operate the hob if the ceramic glass surface is cracked or broken. Disconnect from power immediately.
- Keep children away from the appliance during operation and when it is cooling down. Residual heat can cause burns.
- Feu servir només estris de cuina compatibles amb inducció.
- Avoid placing metallic objects (e.g., cutlery, lids) on the hob surface as they can heat up.
- Do not store flammable materials near or on the hob.
- Apagueu sempre les zones de cocció després de cada ús.
- Do not clean the hob with steam cleaners or high-pressure cleaning equipment.
3. Producte acabatview
The Sauter SPI4362B is a 3-zone induction hob designed for built-in installation. It features a black ceramic glass surface and touch controls for precise cooking.
Característiques principals:
- 3 Induction Cooking Zones: Includes a large 28 cm zone with up to 5000W power, and two smaller zones (16 cm and 21 cm).
- 7200W Total Power: Proporciona un escalfament eficient i ràpid.
- EasyCook Function: Identifies the ideal cooking zone based on cookware diameter, optimizing energy use and heating time.
- Control precís: Each zone offers 14 cooking positions for fine temperature adjustment.
- 3 Direct Access Shortcuts: Including a Booster function for maximum power. These shortcuts are programmable.
- Centralized Lock: For enhanced safety, preventing accidental changes to settings.
- Indicador de calor residual: Displays 'H' to warn when a zone is still hot.
- Container Detection: Automatically detects the presence of suitable cookware.

Una sobrecàrrega view of the Sauter SPI4362B induction hob, black ceramic glass, with a stainless steel pan containing chopped vegetables (zucchini, carrots, bell peppers, onions) being stirred by a wooden spoon. The hob features two active cooking zones with illuminated outlines and touch controls visible at the front.
4. Configuració i instal·lació
Installation of the Sauter SPI4362B induction hob should only be performed by a qualified electrician or authorized service technician.
Requisits d'instal·lació:
- Dimensions del retall: 560 mm (width) x 490 mm (depth).
- Connexió elèctrica: The hob requires a dedicated electrical circuit.
- Font d'alimentació: 220-240V, 50/60Hz.
- Potència màxima: 7.2 kW.
- Current Intensity: 32 A.
- Longitud del cable: 130 cm (supplied without a plug).
- Assegureu-vos una ventilació adequada al voltant de l'aparell.
Refer to the detailed installation diagram provided in the separate installation guide for precise measurements and clearances.
5. Instruccions de funcionament
5.1. Encendre/apagar
- To turn on: Press the main power button. The display will show '0' for each zone.
- To turn off: Press the main power button again.
5.2. Selecció d'una zona de cocció i ajust de la potència
- Col·loqueu una paella apta per a inducció a la zona de cocció desitjada.
- Select the zone by touching its corresponding control.
- Adjust the power level using the '+' and '-' controls or by selecting one of the 14 available positions.
- Utilitza el Potenciador shortcut for rapid heating.
5.3. EasyCook Function
The EasyCook function (indicated by an Eco label) helps identify the most suitable cooking zone for your cookware. When activated, it guides you to the optimal zone, contributing to faster temperature achievement and energy savings.
5.4. Centralized Lock
Activate the centralized lock function to prevent accidental changes to settings, especially useful when cleaning the hob or to prevent children from operating it. Refer to the control panel for the specific lock button.
5.5. Indicador de calor residual
After a cooking zone is switched off, an 'H' will appear on the display if the zone is still hot enough to cause burns. Do not touch the surface until the 'H' disappears.
5.6. Container Detection
The hob automatically detects if a suitable pan is placed on the cooking zone. If no pan is detected or if the pan is unsuitable, the hob will not activate or will switch off after a short period.
6. Manteniment i Neteja
Regular cleaning helps maintain the appearance and performance of your induction hob.
- Always ensure the hob is switched off and cool before cleaning.
- For light soiling, wipe the ceramic glass surface with a damp drap i detergent suau.
- For stubborn stains or burnt-on food, use a specialized ceramic hob cleaner and a scraper designed for glass surfaces.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the surface.
- Netegeu el tauler de control amb un damp drap. Assegureu-vos que no entri humitat als controls.
7. Solució De Problemes
Si teniu problemes amb la placa de cuina, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| La placa de cuina no s'encén. | No power supply; main power button not pressed. | Check circuit breaker; press main power button. |
| La zona de cocció no escalfa. | Unsuitable cookware; no pan detected; zone not selected. | Use induction-compatible pan; ensure pan is centered; select zone and power. |
| Display shows '0' blinking. | Ignition indicator, waiting for pan or selection. | Place suitable pan and select power level. |
| Display shows 'H'. | Indicador de calor residual. | This is normal. The zone is still hot. Do not touch. |
| Els controls tàctils no responen. | Control panel is wet; centralized lock is active; internal error. | Dry the control panel; deactivate the centralized lock; if issue persists, contact service. |
For issues not listed here or if problems persist, contact Sauter customer support or a qualified service technician.
8. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Sauter |
| Número de model | SPI4362B |
| Tipus | Placa d’inducció |
| Tipus d'instal·lació | Built-in (Drop-in) |
| Nombre de zones de cocció | 3 |
| Material de la superfície | Vidre ceràmic |
| Color | Negre |
| Potència total | 7200 watts |
| Voltage | 220-240 volts |
| Freqüència | 50/60 Hz |
| Dimensions del producte (L x A x A) | 60 x 51 x 5.5 cm |
| Built-in Dimensions (W x D) | 560 x 490 mm |
| Longitud del cable | 130 cm |
| Pes net | 14 kg |
9. Informació de la garantia
Sauter provides a commitment to quality for its products. Spare parts for the SPI4362B model are available for a period of 2 years from the date of purchase. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Sauter customer service.
10. Suport i contacte
For technical assistance, service requests, or further information regarding your Sauter SPI4362B Induction Hob, please contact Sauter customer support. Contact details can typically be found on the Sauter official weblloc o a la documentació del producte.
When contacting support, please have your model number (SPI4362B) and purchase date readily available.





