Informació important de seguretat
Please read and understand all instructions before operating this product. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Ensure the vehicle engine is running when using the inflator to prevent draining the car battery.
- No deixeu l'inflador sense vigilància durant el funcionament.
- Mantenir fora de l'abast dels nens.
- Do not operate the inflator if it is damaged or malfunctioning.
- Avoid prolonged continuous operation. Allow the unit to cool down after extended use to prevent overheating.
- Always ensure the correct pressure unit (PSI, BAR, kPa) is selected for your application.
- Wear appropriate eye protection when inflating tires.
Producte acabatview
The MICHELIN 12265 Digital High Power Tyre Inflator is designed for efficient and accurate tire inflation, featuring a digital gauge, USB charging, and LED lighting. It is compatible with all cars, SUVs, trailers, and motorcycles.
Característiques principals:
- Digital gauge accurate to +/- 1 PSI up to 50 PSI.
- Rapid inflation: 0-30 PSI in approximately 3 minutes.
- Switchable pressure units: PSI, BAR, & kPa.
- White LCD display for clear readings.
- Integrated USB mobile charger and 12V DC socket.
- Built-in LED lights for illumination.
- 60 cm long high-pressure air hose.
- Includes extra valves for inflating balls, toys, and other inflatable items.
Components:
Figura 1: Frontal view of the inflator showing the digital display, control buttons, and power sockets.
- Pantalla digital: Shows current and target pressure.
- Botó On/Off: Activates and deactivates the inflator.
- Unit Selection Button: Cycles through PSI, BAR, and kPa.
- 12V DC Power Plug: Connects to vehicle's 12V DC socket.
- Mànega d'aire: Connects to tire valve.
- Port de càrrega USB: Per carregar dispositius mòbils.
- 12V DC Accessory Socket: For powering other 12V devices.
- Llums LED: Provides illumination during use.
Configuració
- Desempaquetar l'inflador: Remove the inflator and all accessories from its packaging.
- Locate Vehicle's 12V DC Socket: Ensure your vehicle's 12V DC socket (cigarette lighter socket) is clean and free from debris.
- Connectar l'alimentació: Plug the inflator's 12V DC power plug into your vehicle's 12V DC socket. Ensure a secure connection.
- Start Vehicle Engine: For optimal performance and to prevent battery drain, start your vehicle's engine before operating the inflator.
Instruccions de funcionament
Follow these steps to inflate your tires or other items:
- Encès: With the 12V DC power plug connected and the vehicle engine running, press the On/Off button on the inflator. The digital display will illuminate and show "0.00" or the current tire pressure if connected.
- Selecciona la unitat de pressió: Press the unit selection button (labeled "PSI/BAR/kPa" or similar) to cycle through the available pressure units (PSI, BAR, kPa) until your desired unit is displayed.
- Connectar a la vàlvula del pneumàtic: Unscrew the valve cap from the tire. Securely screw the inflator's air hose connector onto the tire valve stem. Ensure there are no air leaks.
- Comença la inflació: Press the On/Off button to start the inflation process. The digital display will show the increasinpressió g.
- Monitor Pressure and Stop: Due to the nature of the pressure measuring system, the reading may drop slightly when the inflator stops. To achieve the desired pressure, inflate the tire to approximately 2 PSI higher than your target pressure, then stop the inflator. For example, if 32 PSI is required, stop inflation at 34 PSI. The pressure will then settle to the correct level.
- Desconnectar: Once the desired pressure is reached, press the On/Off button to stop the inflator. Quickly unscrew the air hose connector from the tire valve and replace the valve cap.
- Using USB and 12V DC Sockets: The integrated USB port and 12V DC accessory socket can be used to charge mobile devices or power other 12V accessories while the inflator is connected to the vehicle's 12V DC supply.
- Ús de llums LED: Activate the LED lights by pressing the dedicated light button (if available) for illumination in low-light conditions.
- Inflating Other Items: Attach the appropriate extra valve adapter to the air hose and follow steps 3-6 for inflating balls, toys, or other inflatables.
Figura 2: Esquena view of the inflator, showing the hose storage and printed operating guidelines.
Nota: The maximum pressure for this inflator is 50 PSI. Do not exceed the recommended pressure for your tires or inflatable items.
Manteniment
- Neteja: Netegeu l'inflador amb anunciamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Emmagatzematge: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose and power cable are neatly coiled.
- Comproveu si hi ha danys: Regularly inspect the power cable, air hose, and connectors for any signs of wear or damage. Do not use if damaged.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Inflator does not power on. | No power from 12V DC socket; loose connection; vehicle engine not running; blown fuse in vehicle or inflator. | Ensure 12V DC plug is securely inserted. Start vehicle engine. Check vehicle's fuse box. If the inflator's fuse is suspected, refer to the detailed troubleshooting guide in the full product manual or contact customer support. |
| Digital display shows "0.00" or "Err". | Incorrect connection to tire valve; internal error. | Ensure the air hose is securely attached to the tire valve. If the error persists, refer to the detailed troubleshooting guide in the full product manual or contact customer support. |
| Inflation is slow or unit cycles on/off. | Bateria baixa del vehicletage; power interruption; unit overheating. | Ensure vehicle engine is running. If a power interruption or unit cycling occurs, follow the reset procedure outlined in the full product manual. Allow the unit to cool down if it has been running for an extended period. |
| Pressure reading drops after stopping inflation. | Normal operation due to pressure measurement system. | This is expected. Inflate to approximately 2 PSI higher than the target pressure, then stop. The pressure will settle to the correct level. |
Especificacions
Figura 3: lateral view of the inflator illustrating its compact dimensions.
| Atribut | Detall |
|---|---|
| Número de model | ML-12265 |
| Marca | MICHELIN |
| Font d'alimentació | 12V DC (Vehicle Socket) |
| Pressió màxima | 50 PSI (lliura per polzada quadrada) |
| Unitats de pressió | PSI, BAR, kPa |
| Digital Gauge Accuracy | +/- 1 PSI |
| Longitud de la mànega | 60 centímetres |
| Dimensions del producte (L x A x A) | 19.1L x 21.3W x 9.9H centímetres |
| Pes de l'article | 1.19 kg (1190 grams) |
| Material | Metal, Moulded Plastic |
| Característiques especials | Digital Display, Quick Inflation, USB Charging, 12V DC Socket, LED Lights |
Garantia
This MICHELIN 12265 Digital High Power Tyre Inflator comes with a 1 anys de garantia from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
Atenció al client
For technical assistance, troubleshooting, or warranty inquiries, please contact our customer support team:
- Telèfon: 004-005-6833
- Weblloc: For additional information and resources, please visit michelin.caeurope.co.uk.
Please have your product model number (ML-12265) and proof of purchase ready when contacting support.
