Team Associated 91619 3x27.5 Shock Shaft V2 Tin

1. Introducció

This manual provides essential information regarding the Team Associated 91619 3x27.5 Shock Shaft V2 Tin. It covers product specifications, compatibility, installation guidelines, and general maintenance to ensure optimal performance and longevity of the component within your remote-controlled vehicle's suspension system.

2. Producte acabatview

The Team Associated 91619 shock shafts are designed for specific Team Associated RC vehicle models. These shafts feature a durable steel construction with a Titanium Nitride (TiN) coating, which enhances their wear resistance and extends their operational life. The package includes two 3x27.5mm V2 shock shafts, two washers, and two screws for installation.

Image 2.1: Components of the Team Associated 91619 Shock Shaft V2 Tin package. Shown are the two main shock shafts, two mounting screws, and two washers.

2.1 Característiques clau

• Material: Steel construction for durability.
• Recobriment: Titanium Nitride (TiN) coating for reduced friction and extended wear life.
• Dimensions: 3x27.5mm V2 sizing.
• Muntatge: Screw-mounted design.

2.2 Compatibilitat

These shock shafts are compatible with the shocks used on the following Team Associated RC vehicle models:

• Team Associated B44.3
• Equip Associated RC10B5
• Team Associated RC10B5M
• Team Associated RC10SC

Nota important:

These screw-mounted shafts are no compatible with Team Associated e-clip designs. Ensure your shock bodies are designed for screw-mounted shafts before attempting installation.

3. Configuració i instal·lació

Installation of the 91619 shock shafts requires careful attention to detail to ensure proper shock function and vehicle performance. It is recommended to consult your specific vehicle's assembly manual for detailed shock rebuilding procedures.

3.1 Eines necessàries (no incloses)

• Small Phillips head screwdriver or hex driver (depending on existing shock screws)
• Shock pliers (optional, for holding shock shaft without marring)
• Drap net
• Shock oil (appropriate weight for your vehicle)

3.2 Passos d'instal·lació

1. Desmuntatge: Carefully remove the existing shock assembly from your RC vehicle. Disassemble the shock, draining the old shock oil and removing the old shock shaft.
2. Neteja: Clean all shock components thoroughly, including the shock body, piston, and O-rings, to remove any debris or old oil residue.
3. Muntatge: Slide the new 91619 shock shaft through the shock body, ensuring the piston is correctly oriented and secured to the shaft.
4. Secure Shaft: Attach the included washer and screw to the end of the shock shaft, securing it to the shock piston. Ensure the screw is tightened firmly but do not overtighten, which could strip threads or damage components.
5. Refill Shock: Fill the shock body with the appropriate weight of shock oil, following your vehicle's manual for proper bleeding procedures to remove air bubbles.
6. Torneu a muntar: Reassemble the remaining shock components (e.g., cap, spring retainer) and reattach the shock assembly to your RC vehicle.

4. Consideracions operatives

Once installed, the shock shafts are an integral part of your vehicle's suspension system. Their primary function is to allow the shock piston to move smoothly within the shock body, dampening impacts and maintaining tire contact with the ground. Proper operation relies on correct installation and regular maintenance.

• Moviment suau: The TiN coating ensures smooth movement and reduces stiction, contributing to consistent shock performance.
• Absorció d'impacte: The shafts are designed to withstand the forces encountered during RC vehicle operation, absorbing impacts and maintaining suspension integrity.
• Manipulació de vehicles: Properly functioning shock shafts are crucial for stable handling, especially over rough terrain or during jumps.

5. Manteniment

Regular maintenance of your shock shafts and overall shock assembly will prolong their lifespan and ensure consistent performance.

• Neteja: After each use, especially in dusty or dirty conditions, wipe down the exposed shock shafts with a clean, lint-free cloth to remove dirt and debris. This prevents contaminants from entering the shock body and damaging seals.
• Inspecció: Periodically inspect the shock shafts for any signs of bending, nicks, scratches, or excessive wear. Even minor damage can lead to poor shock performance or oil leaks.
• Canvis d'oli: Replace shock oil regularly according to your vehicle's maintenance schedule or if you notice a decrease in damping performance. This is also a good opportunity to inspect the shock shafts.
• Comprovació del segell: Ensure the shock O-rings and seals are in good condition. Leaking oil often indicates worn seals, which can be exacerbated by damaged shock shafts.

6. Solució De Problemes

If you experience issues with your vehicle's suspension after installing or using the 91619 shock shafts, consider the following common problems and solutions:

7. Especificacions

Detailed specifications for the Team Associated 91619 3x27.5 Shock Shaft V2 Tin:

• Número de model: ASCC9619
• Número de peça: 91619
• Shaft Dimensions: 3mm diameter x 27.5mm length (V2)
• Material de construcció: Acer
• Recobriment: Nitrur de titani (TiN)
• Quantitat del paquet: 2 shock shafts, 2 washers, 2 screws
• Dimensions del producte (embalatge): Aproximadament 4.5 x 3.38 x 4.5 polzades (11.43 x 8.59 x 11.43 cm)
• Pes de l'article: Aproximadament 0.319 unces (9.04 grams)
• País d'origen: Xina
• Edat recomanada pel fabricant: 14 anys i més

8. Garantia i Suport

For specific warranty information regarding the Team Associated 91619 3x27.5 Shock Shaft V2 Tin, please refer to the official Team Associated website or contact their customer support directly. As a replacement part, warranty coverage typically applies to manufacturing defects.

8.1 Contacte del fabricant

Fabricant: Hobbico Inc (Team Associated)

Please visit the official Team Associated website for the most current contact information, support resources, and FAQs.