SYMA X5SW Explorers2 Quadcopter User Manual

1. Introducció

The SYMA X5SW Explorers2 is a 2.4G 4-channel, 6-axis gyro RC quadcopter featuring a 0.3MP HD WiFi camera for First Person View (FPV) capabilities. This manual provides comprehensive instructions for safe assembly, operation, and maintenance of your quadcopter. Please read this manual thoroughly before operating the device.

Image 1.1: The SYMA X5SW Explorers2 Quadcopter, a white drone with four propellers and landing gear.

2. Precaucions de seguretat

• Supervisió d'adults: Recommended for users aged 12 years and up. Younger users should always be supervised by an adult.
• Entorn de vol: Operate in open, clear areas away from people, animals, buildings, and power lines. Avoid flying in strong winds.
• Seguretat de la bateria: Do not overcharge batteries. Discontinue use if batteries show signs of damage or swelling. Use only the provided charger.
• Seguretat de l'hèlix: Mantingueu els dits, els cabells i la roba solta allunyats de les hèlixs giratòries.
• Exposició a l'aigua: Avoid contact with water or moisture to prevent damage to electronic components.
• Impactes: While the quadcopter is designed to be durable, severe impacts can cause damage. Inspect the drone after any crash.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x SYMA X5SW Quadcopter
• 1 x 2.4G Transmitter (Remote Controller)
• 1 x 3.7V 500mAh Li-poly Battery
• 1 x 0.3MP WiFi Camera
• 4 x Landing Gear
• 2 x Spare Blades
• 1 x carregador USB
• 1 x Protecting Frame (Propeller Guards)
• 4 x cargols
• 1 x tornavís
• 1 x Smart Phone Clipper
• 1 x Manual d'usuari

4. Muntatge

Follow these steps to assemble your quadcopter:

1. Connectar el tren d'aterratge: Carefully slide the four landing gear pieces onto the designated slots on the underside of the quadcopter until they click into place.
2. Install Propeller Guards: Secure the protecting frame (propeller guards) to the arms of the quadcopter using the provided screws and screwdriver. Ensure they are firmly attached to prevent detachment during flight.


Image 4.1: The SYMA X5SW Explorers2 Quadcopter with its propeller guards installed.

3. Connecta la càmera: Connect the 0.3MP WiFi camera to the port on the underside of the quadcopter. Ensure the connection is secure.


Imatge 4.2: Un primer pla view of the 0.3MP HD WiFi camera attached to the underside of the quadcopter.

4. Install Phone Clipper: Attach the smart phone clipper to the remote controller if you plan to use the FPV function with your smartphone.

5. Càrrega i instal·lació de la bateria

5.1 Quadcopter Battery

The quadcopter uses a 3.7V 500mAh Li-poly battery.

1. Connect the Li-poly battery to the USB charger.
2. Plug the USB charger into a USB power source (e.g., computer, USB wall adapter).
3. The charging time is approximately 120 minutes. Do not leave unattended during charging.
4. Once charged, open the battery compartment on the quadcopter and insert the battery, ensuring correct polarity. Close the compartment securely.

Image 5.1: A close-up of the battery compartment on the underside of the SYMA X5SW Explorers2 Quadcopter, showing the 'OPEN' tab.

5.2 Remote Controller Batteries

The remote controller requires 4 AA batteries (not included).

1. Obriu la tapa de la bateria a la part posterior del comandament a distància.
2. Insert 4 AA batteries, observing the correct polarity (+/-).
3. Tanqueu la tapa de la bateria.

6. Remote Controller Overview

The 2.4G transmitter operates in MODE2 (left throttle hand). Familiarize yourself with the controls before flight.

• Palanca esquerra (accelerador/guinyada): Controla l'altitud (amunt/avall) i la rotació (esquerra/dreta).
• Stick dret (inclinació/balanceig): Controls forward/backward movement and left/right strafing.
• Botons de retallar: Used to fine-tune the quadcopter's stability if it drifts in any direction.
• Botó de mode sense cap: Activa/desactiva el mode sense cap.
• Interruptor de velocitat: Toggles between different speed modes (e.g., low, high).
• Botó de gir: Initiates 360-degree flips (ensure sufficient altitude).
• Interruptor d'alimentació: Encén/apaga el comandament a distància.

7. Instruccions de funcionament

7.1 Pairing the Quadcopter and Remote

1. Ensure the quadcopter battery is charged and installed, and the remote controller has fresh AA batteries.
2. Col·loca el quadricòpter sobre una superfície plana i anivellada.
3. Turn on the quadcopter. The indicator lights will flash.
4. Enceneu el comandament a distància.
5. Push the left stick (throttle) all the way up, then all the way down. You will hear a beep, and the quadcopter lights will become solid, indicating successful pairing.

7.2 Enlairament i aterratge

• Enlairament: After pairing, slowly push the left stick (throttle) upwards to make the quadcopter ascend.
• Aterratge: Slowly pull the left stick (throttle) downwards to make the quadcopter descend. Once it lands, pull the stick all the way down to stop the motors.

7.3 Controls de vol

• Pujar/Descens: Left stick up/down.
• Gir a l'esquerra/dreta (guinyada): Left stick left/right.
• Forward/Backward (Pitch): Right stick up/down.
• Strafe Left/Right (Roll): Right stick left/right.

7.4 Mode sense cap

In Headless Mode, the quadcopter's orientation is relative to the pilot, regardless of which way the front of the drone is facing. This simplifies control for beginners.

1. Before activating, ensure the quadcopter is facing forward relative to the pilot.
2. Press the Headless Mode button on the remote controller. The quadcopter lights will flash rapidly to confirm activation.
3. To exit Headless Mode, press the button again.

7.5 FPV Function (WiFi Camera)

The 0.3MP HD WiFi camera allows for real-time video transmission to a compatible smartphone (iOS and Android).

1. Download and install the SYMA FPV app on your smartphone.
2. Turn on the quadcopter and ensure the camera is connected.
3. On your smartphone, go to WiFi settings and connect to the quadcopter's WiFi network (usually named "SYMA-X5SW" or similar).
4. Open the SYMA FPV app. You should see a live video feed from the camera.
5. You can record videos and take photos directly from the app.

8. Manteniment

• Neteja: Feu servir un drap suau i sec per netejar el quadricòpter. Eviteu l'aigua o els dissolvents.
• Inspecció de l'hèlix: Regularly check propellers for damage (cracks, bends). Replace damaged propellers immediately using spare blades.
• Cura del motor: Mantingueu els motors lliures de pols i deixalles.
• Emmagatzematge: Store the quadcopter and remote in a cool, dry place away from direct sunlight. Remove batteries from the remote if storing for extended periods.

9. Solució De Problemes

10. Especificacions

• Nom del model: X5SW
• Marca: SYMA
• Canal: 4 canals
• Giroscopio: 6-Eix
• State of Assembly: Ready-To-Fly (RTF)
• Bateria del controlador: 4 piles AA (no incloses)
• Mode de controlador: MODE2 (left throttle hand)
• Distància remota: Approximately 50 Meters
• Bateria del quadricòpter: 3.7V 500mAh Li-poly Battery (included)
• Temps de càrrega: Approximately 120 Minutes (USB charging)
• Càmera: 0.3MP HD WiFi Camera (FPV capable)
• Tecnologia de connectivitat: Wi-Fi
• Dimensions del producte: 12.4" de llargada x 12.4" d'amplada x 4.1" d'alçada (315 x 315 x 105 mm)
• Material: Niló, plàstic
• Edat recomanada: 12 anys i més

11. Garantia i Suport

For warranty information or technical support, please refer to the official SYMA weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.