1. Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Pro-Ject RM3 Carbon turntable. Designed for high-fidelity audio playback, this turntable features a carbon tonearm and a sleek high-gloss white finish. Please read this manual thoroughly before initial use to ensure proper function and longevity of your device.
2. Instruccions de seguretat
- Desconnecteu sempre el plat giratori de la xarxa elèctrica abans de netejar-lo o fer-ne el manteniment.
- Keep the turntable away from water, moisture, and direct sunlight.
- Col·loqueu el tocadiscs sobre una superfície estable i anivellada per evitar vibracions i garantir un funcionament correcte.
- No intenteu desmuntar ni reparar la unitat vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
- Utilitzeu només l'adaptador d'alimentació subministrat amb la unitat.
3. Contingut del paquet
Comproveu que el vostre paquet contingui els elements següents:
- Pro-Ject RM3 Carbon Turntable Unit
- Plat
- Cinturó de seguretat
- Contrapès
- Pes antipatinatge
- Unitat d'alimentació
- Mat de feltre
- Manual d'instruccions
4. Configuració
4.1 Col·locació
Place the turntable on a firm, level surface, free from vibrations. Ensure adequate ventilation around the unit.
4.2 Instal·lació del plat i la corretja
- Carefully place the platter onto the central spindle.
- Locate the drive motor pulley. Gently stretch the drive belt around the platter's sub-platter and the motor pulley.
Image: The Pro-Ject RM3 Carbon turntable, showing the black platter, white plinth, and carbon fiber tonearm. This image illustrates the assembled unit before operation.
4.3 Tonearm Balance and Tracking Force Adjustment
The cartridge is typically pre-mounted. Follow these steps to balance the tonearm and set the tracking force:
- Traieu el protector del llapis.
- Lower the tonearm lift.
- Carefully move the tonearm between the tonearm rest and the platter.
- Adjust the counterweight by rotating it until the tonearm floats horizontally.
- Return the tonearm to its rest. Hold the counterweight stationary and rotate the tracking force ring until the "0" mark aligns with the black line on the tonearm.
- Rotate the counterweight (including the ring) counter-clockwise to set the recommended tracking force for your cartridge (refer to cartridge specifications, typically 1.8g - 2.2g).
4.4 Anti-skating Adjustment
Attach the anti-skating weight thread to the second groove of the anti-skating stub for typical cartridges. Adjust as necessary based on listening tests.
4.5 Connexió a un Ampmés viu
Connect the turntable's RCA output cables to the "Phono" input of your amplifier or a dedicated phono preamplificador. Assegureu-vos que el cable de terra estigui connectat al terminal de terra del vostre ampmés viu / preamplificador per minimitzar el brunzit.
4.6 Connexió d'alimentació
Connect the power supply to the turntable's power input and then plug it into a suitable wall outlet.
5. Instruccions de funcionament
5.1 Engegada/apagada
Press the power button located on the plinth to turn the turntable on or off. The platter will begin to rotate when powered on.
5.2 Reproduint un disc
- Col·loca un disc al plat, assegurant-te que quedi centrat.
- Aixequeu el braç amb la palanca d'elevació del braç.
- Col·loqueu amb cura el llapis sobre el solc inicial desitjat del disc.
- Gently lower the tonearm lift lever to allow the stylus to descend onto the record.
5.3 Aturar la reproducció
- Aixequeu el braç amb la palanca d'elevació del braç.
- Torneu a col·locar el braç al seu lloc de repòs.
- Press the power button to stop the platter rotation.
6. Manteniment
6.1 Neteja del plat giratori
Wipe the plinth and platter with a soft, dry, anti-static cloth. Avoid using abrasive cleaners or solvents. For the high-gloss finish, use a specialized cleaning solution if necessary, applied to the cloth, not directly to the surface.
6.2 Neteja del llapis òptic
Use a dedicated stylus cleaning brush or fluid. Always brush from back to front, never side to side, to avoid damaging the stylus cantilever.
6.3 Drive Belt Replacement
Over time, the drive belt may stretch or degrade. If you notice inconsistent speed or reduced performance, replace the belt with an original Pro-Ject replacement part. Refer to section 4.2 for belt installation.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No power / Platter not spinning | Power cable disconnected; Power outlet faulty; Power button off. | Check power connections; Try a different outlet; Ensure power button is pressed. |
| Sense so o volum molt baix | Incorrecte amplifier input; Phono stage not engaged; Cables loose; Stylus protector still on. | Connect to "Phono" input; Activate phono stage; Secure all cables; Remove stylus protector. |
| Distorted sound or skipping | Incorrect tracking force; Damaged stylus; Dirty record; Turntable not level. | Adjust tracking force (Section 4.3); Inspect/replace stylus; Clean record; Level the turntable. |
| Soroll de brunzit | Ground wire not connected; Interference from other electronics; Motor issue. | Ensure ground wire is connected; Relocate turntable away from interfering devices; Contact support if motor hum persists. |
| Velocitat inconsistent | Worn drive belt; Motor issue. | Replace drive belt (Section 6.3); Contact support if issue persists. |
8. Especificacions
- Model: RM3 Carbon (RPM3CWHT)
- Marca: Pro-Ject
- Dimensions del producte: 21 x 18 x 10.5 polzades
- Pes de l'article: 15.92 lliures
- Material: Fusta d'enginyeria
- Color: High-Gloss White
- Tipus de motor: Motor de corrent continu
- Voltage: 15 Volts
- Ràtio senyal / soroll: 71 dB
9. Garantia i Suport
Pro-Ject products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject website. For technical support or service inquiries, please contact your authorized Pro-Ject dealer or the manufacturer's customer service department.
Fabricant: Pro-Ject
Weblloc: Botiga de sistemes d'àudio Pro-Ject
