1. Introducció
This manual provides essential instructions for the installation, operation, and maintenance of the Cisco DS-C9124-K9 MDS 9124 24-Port Fabric Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2. Informació de seguretat
Instruccions importants de seguretat:
- Assegureu-vos de la connexió a terra adequada del dispositiu.
- Do not operate the switch in wet or humid conditions.
- Desconnecteu l'alimentació abans de realitzar qualsevol procediment de manteniment o instal·lació.
- This unit is suitable for an IT power system connection of max 230 V Phase-Phase.
- Observe all warning labels on the device.
Descripció de la imatge: A close-up of a warning label on the switch, indicating "Class 1 Laser" and stating that "This unit is suitable for an IT power system connection of max 230 V Phase-Phase."
3. Producte acabatview
The Cisco DS-C9124-K9 MDS 9124 is a 24-port Multilayer Fabric Switch designed for high-performance storage area networks (SANs).
3.1 Tauler frontal
Descripció de la imatge: Un front complet view of the Cisco DS-C9124-K9 switch, showing the 24 SFP ports, console port, management port, status LEDs, and reset button on the left side. The right side shows the 24 SFP ports.
- 24 ports SFP: For fiber channel connectivity.
- Port de la consola: RJ-45 serial console for local management.
- MGMT 10/100 Port: Port Ethernet RJ-45 per a la gestió fora de banda.
- LED d'estat: Indicators for power, system status, and fan operation.
- Botó de restabliment: Per reiniciar el dispositiu.
Descripció de la imatge: A close-up of the left side of the switch's front panel, highlighting the CONSOLE port, MGMT 10/100 port, STATUS, P/S (Power Supply), and FAN LEDs, along with the RESET button.
Descripció de la imatge: Un primer pla view of the 24 SFP (Small Form-Factor Pluggable) ports on the front panel of the switch, labeled 1 through 24.
Descripció de la imatge: Un detallat view of the first 12 SFP ports (1-12) on the front panel of the Cisco switch, showing the empty slots for transceivers.
3.2 Panell posterior
Descripció de la imatge: A full rear view of the Cisco DS-C9124-K9 switch, displaying the power input module with an AC inlet and power switch, along with multiple fan exhaust vents.
- Entrada d'alimentació: AC power connector with an on/off switch.
- Mòduls de ventilador: Integrated cooling fans for heat dissipation.
Descripció de la imatge: A close-up of the power input module on the rear panel, showing the AC power inlet, the power switch, and the "DS-C24-300AC" label, along with input/output OK LEDs.
4. Configuració i instal·lació
Follow these steps to properly install your Cisco DS-C9124-K9 switch.
- Desembalatge: Carefully remove the switch from its packaging. Inspect for any physical damage.
- Muntatge: The switch can be rack-mounted. Secure it using appropriate rack-mounting hardware (not included). Ensure adequate airflow around the unit.
- Connexió d'alimentació:
- Connect the provided AC power cord to the power input on the rear panel.
- Connecteu l'altre extrem del cable d'alimentació a una presa de corrent amb connexió a terra.
- Ensure the power switch on the rear panel is in the OFF position before connecting.
- Connexions de xarxa:
- Insert SFP transceivers into the desired fiber channel ports on the front panel.
- Connect fiber optic cables from your SAN devices to the SFP transceivers.
- For management, connect an Ethernet cable from your management workstation to the MGMT 10/100 port.
- For console access, connect a serial cable from your workstation to the CONSOLE port.
- Encès: Flip the power switch on the rear panel to the ON position. Observe the STATUS LEDs on the front panel.
5. Instruccions de funcionament
Once the switch is powered on and connected, you can begin configuration and operation.
- Configuració inicial: Access the switch via the console port or the management Ethernet port using a terminal emulator (e.g., PuTTY) and the appropriate IP address. Refer to Cisco documentation for detailed command-line interface (CLI) configuration.
- Estat de seguiment: The front panel LEDs provide a quick visual status:
- ESTAT: Indica l'estat general del sistema.
- P/S: Indica l'estat de la font d'alimentació.
- VENTILADOR: Indicates fan operation status.
- Port Activity: Each SFP port typically has an LED to indicate link status and activity.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre interruptor.
- Neteja: Periodically clean the exterior of the switch with a soft, dry cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
- Actualitzacions de firmware: Consulteu regularment el suport tècnic de Cisco website for the latest firmware updates. Follow Cisco's instructions for firmware upgrade procedures.
- Control ambiental: Maintain the operating environment within specified temperature and humidity ranges to prevent overheating and component damage.
7. Solució De Problemes
Aquesta secció ofereix solucions a problemes comuns que podeu trobar.
| Problema | Causa possible | Solució |
|---|---|---|
| L'interruptor no s'encén. | No power, faulty power cord, power switch off. | Check power cord connection, ensure power outlet is active, verify power switch is ON. |
| No link light on SFP port. | Faulty SFP transceiver, incorrect fiber cable, remote device off. | Verify SFP transceiver is properly seated, check fiber cable integrity, ensure connected device is powered on and configured. |
| No es pot accedir a la interfície de gestió. | Adreça IP incorrecta, problema amb el cable de xarxa, tallafocs. | Verify IP configuration, check Ethernet cable, temporarily disable local firewall for testing. Try console access. |
8. Especificacions
Technical specifications for the Cisco DS-C9124-K9 MDS 9124 24-Port Fabric Switch.
- Model: DS-C9124-K9
- Ports: 24 x SFP Fiber Channel ports
- Ports de gestió: 1 x Console (RJ-45), 1 x MGMT 10/100 (RJ-45)
- Entrada d'alimentació: 100-240 VAC, 4-2 A, 50-60 Hz (as seen on power supply label DS-C24-300AC)
- Fabricant: CISCO SYSTEMS - ENTERPRISE
- ASIN: B011YZLTO0
- Data de primera disponibilitat: 18 de juliol de 2015
- Número de sèrie ExampLI: JAF143886VX
- Número de peça ExampLI: 68-2714-06 D0
- Product ID ExampLI: DS-C9124-K9 V04
Descripció de la imatge: A close-up of a product label on the switch, displaying manufacturing date (2010-09), "MADE IN CHINA", a barcode, part number "68-2714-06 D0", and product ID "DS-C9124-K9 V04".
9. Garantia i Suport
For warranty information and technical support, please refer to the official Cisco website or contact Cisco customer service directly. Keep your purchase receipt and product serial number (e.g., JAF143886VX) readily available when seeking support.
Descripció de la imatge: A close-up of a product label on the switch, showing a serial number (SN: JAF143886VX) and other identification codes.
