1. Introducció
The DigiTech DOD Gonkulator Ring Modulator is a unique guitar effect pedal designed to produce clangy, robotic sounds and aggressive distortion. This updated version offers enhanced flexibility with an adjustable carrier signal control, allowing for a wide range of tonal experimentation from subtle modulation to extreme atonal effects. It also features a built-in distortion circuit to further shape your sound.
2. Característiques clau
- Adjustable Carrier Signal: Provides precise control over the ring modulation effect.
- True Bypass: Ensures your guitar's tone remains pristine when the pedal is disengaged.
- Lighter Aluminum Chassis: Durable and pedalboard-friendly design.
- Aggressive Distortion Circuit: Integrated distortion for signal mangling.
- Controls independents: Dedicated knobs for Gain, Distortion, Output, Frequency, and Ring.
- Modern 9V DC Power Supply Input: Compatible with standard pedalboard power.
3. Controls i Funcions
The DOD Gonkulator features five control knobs and a footswitch for comprehensive sound shaping.
Imatge 1: Part superior view of the DOD Gonkulator Ring Modulator pedal, showing all control knobs and the footswitch.
- GUANY: Adjusts the input gain for the distortion circuit.
- DIST (Distorsió): Controls the amount of distortion applied to the signal.
- SORTIDA: Sets the overall output volume of the pedal.
- FREQ (freqüència): Adjusts the carrier signal frequency for the ring modulation effect. This knob is crucial for tuning the robotic sounds.
- Anell: Controls the blend of the dry signal with the ring modulated signal. Turn clockwise for more ring modulation.
- Interruptor de peu: Toggles the effect on/off. Features true bypass.
4. Configuració i connexions
Follow these steps to connect your DOD Gonkulator pedal:
- Font d'alimentació: Connect a standard 9V DC power adapter (center negative) to the PSU jack on the pedal. The pedal also includes a 9V battery.
- Entrada: Connect your guitar to the "IN" jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- Sortida: Connect the "OUT" jack on the left side of the pedal to your amplifier's input (or the next pedal in your signal chain) using a standard 1/4-inch instrument cable.
Imatge 2: Lateral view of the DOD Gonkulator pedal, highlighting the input and output jacks for connecting to your guitar and ampmés viu.
5. Accionament del pedal
The DOD Gonkulator combines ring modulation and distortion effects. Experiment with the controls to find your desired sound.
- Ring Modulation:
- Comença amb el Anell knob at a low setting.
- Ajusteu el FREQ knob to sweep through different carrier frequencies, creating various robotic and metallic tones.
- Augmentar el Anell knob to blend more of the modulated signal.
- Distorsió:
- Utilitza el GUANYA knob to control the input level into the distortion circuit.
- Ajusteu el DIST knob to set the amount of overdrive/distortion.
- The distortion circuit can be used independently or in conjunction with the ring modulator for unique textures.
- Control de volum: Utilitza el SORTIDA knob to match the pedal's volume to your bypassed signal or to provide a boost.
Video 1: Demonstration of the Sonicake Bitcrusher pedal, showcasing various bitcrushing effects. While not the Gonkulator, this video provides an example of digital audio manipulation effects.
Video 2: Another demonstration of the SONICAKE Bitcrusher Guitar Pedal, illustrating its sound capabilities. This video offers insight into similar sound manipulation effects.
6. Manteniment
- Keep the pedal clean and free from dust. Use a soft, dry cloth.
- Avoid exposing the pedal to extreme temperatures, humidity, or direct sunlight.
- When not in use for extended periods, disconnect the power supply and remove the 9V battery to prevent leakage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No fa so quan s'acciona el pedal. | Incorrect connections, dead battery, faulty power supply. | Check all cable connections. Replace the 9V battery or try a different power adapter. Ensure the power adapter meets 9V DC (center negative) specifications. |
| So feble o distorsionat. | Low battery, incorrect knob settings, faulty cables. | Replace the 9V battery. Adjust GAIN, DIST, and OUTPUT knobs. Test with different instrument cables. |
| Soroll o brunzit no desitjat. | Bucle de terra, interferències d'altres dispositius electrònics, font d'alimentació defectuosa. | Use an isolated power supply. Ensure all cables are properly shielded. Try moving the pedal away from other electronic devices. |
8. Especificacions
- Pes de l'article: 9.9 unces
- Dimensions del producte: 6.63 x 4.25 x 4.81 polzades
- Número de model de l'article: DOD-GONKULATOR
- Bateries: Necessita 1 bateria de 9 V (inclosa)
- Font d'alimentació: Corded Electric (9V DC, center negative)
- Color: Blau
- Format del senyal: Analògic
- Interfície de maquinari: Àudio d'1/4 de polzada
9. Garantia i Suport
For warranty information and technical support, please refer to the official DigiTech weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra.
Podeu visitar el DigiTech Store per a més productes i informació.
