GoWISE Power 1000W Pure Sine Wave Inverter (Model PS1002) User Manual

1. Introducció

This manual provides essential information for the safe and efficient operation of your GoWISE Power 1000W Pure Sine Wave Inverter. This device converts 12V DC power from a battery source into 120V AC power, suitable for various applications including vehicles, marine vessels, camping, and emergency power situations. Please read this manual thoroughly before installation and use.

2. Informació de seguretat

• Risc elèctric: Always disconnect the inverter from the battery before performing any maintenance or making connections.
• Ventilació: Ensure the inverter is installed in a well-ventilated area. Do not block the cooling fan vents.
• Protecció contra la humitat: This inverter is not waterproof. It MUST NOT be installed where it could get wet or damp.
• Protecció de sobrecàrrega: Do not exceed the inverter's continuous power rating (1000W) or surge power rating (2000W). Overloading can damage the inverter and connected devices.
• Compatibilitat de la bateria: Verify the maximum amperage of your battery and its compatibility with the inverter. Consult your battery manufacturer if unsure.
• Connexió a terra adequada: Assegureu-vos que l'inversor estigui correctament connectat a terra d'acord amb els codis elèctrics locals.
• Nens i animals de companyia: Mantingueu l'inversor fora de l'abast dels nens i les mascotes.

3. Contingut del paquet

Your GoWISE Power 1000W Pure Sine Wave Inverter package includes the following items:

• GoWISE Power 1000W Pure Sine Wave Inverter
• Red Battery Cable with Ring Terminal
• Black Battery Cable with Ring Terminal
• Remote Switch with Cable
• Manual d'instruccions (aquest document)

Image 3.1: The GoWISE Power 1000W Pure Sine Wave Inverter shown with its included accessories: battery cables and remote switch.

Imatge 3.2: Un apropament view of the remote switch and the red and black battery cables with ring terminals.

4. Producte acabatview

The GoWISE Power PS1002 is a pure sine wave inverter designed for reliable power conversion. It features:

• Potència contínua: 1000 watts
• Potència de sobretensió: 2000 watts
• Entrada: 12V DC
• Sortida: 120V CA, 60Hz
• Punts de venda: Two standard AC outlets, one 5V USB port
• Sistemes de protecció: Thermal protection, Overload protection, Over Voltage protection, Under Voltage protection, Low Voltage protection alarm.
• Comandament a distància: Includes a remote switch for convenient power control.

Image 4.1: The front panel of the inverter, featuring two standard AC outlets, a 5V USB port, the main power switch, and indicator lights for power and protection status.

Image 4.2: The rear panel of the inverter, displaying the DC input terminals (red for positive, black for negative), the grounding screw, and the cooling fans.

5. Configuració i instal·lació

Seguiu aquests passos per a una instal·lació correcta:

1. Muntatge: Choose a dry, well-ventilated location for the inverter. Ensure there is sufficient space around the unit for airflow, especially around the cooling fans.
2. Posada a terra: Connect a grounding wire (not included) from the inverter's grounding screw to a suitable ground point (e.g., vehicle chassis, earth ground).
3. Connexió de la bateria:
   • Assegureu-vos que l'interruptor d'alimentació de l'inversor estigui en la posició OFF.
   • Connecteu el vermell battery cable's ring terminal to the positiu (+) terminal of your 12V DC battery.
   • Connecteu l'altre extrem del vermell cable a la vermell (+) terminal de l'inversor.
   • Connecteu el negre battery cable's ring terminal to the negatiu (-) terminal of your 12V DC battery.
   • Connecteu l'altre extrem del negre cable a la negre (-) terminal de l'inversor.
   • Assegureu-vos que totes les connexions estiguin ben ajustades i segures. Les connexions soltes poden causar sobreescalfament i danys.
4. Remote Switch Connection: Plug the remote switch cable into the 'Remote On/Off' port on the inverter's front panel.

Image 5.1: The red and black battery cables with pre-attached ring terminals for secure connection to battery posts.

6. Instruccions de funcionament

1. Encès: Press the 'Power' button on the inverter's front panel or the 'ON/OFF' button on the remote switch. The green 'Power' LED indicator should illuminate.
2. Dispositius de connexió: Plug your 120V AC devices into the standard AC outlets or your 5V USB devices into the USB port.
3. Seguiment: Observe the 'Power' and 'Protect' LED indicators. The 'Power' LED indicates normal operation. The 'Protect' LED indicates a fault condition (e.g., overload, over-voltage, baix voltage, thermal shutdown).
4. Apagat: Press the 'Power' button on the inverter or the 'ON/OFF' button on the remote switch. The green 'Power' LED will turn off.

Consideracions importants:

• The inverter's cooling fan will activate automatically when needed to maintain optimal operating temperature.
• Avoid connecting appliances that exceed the inverter's continuous power rating.
• For sensitive electronics, the pure sine wave output ensures stable and clean power, similar to household electricity.

7. Manteniment

• Neteja: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure cooling vents are free from dust and debris.
• Comprovació de la connexió: Regularly inspect battery cable connections for tightness and corrosion. Clean terminals if necessary.
• Emmagatzematge: Si guardeu l'inversor durant un període prolongat, desconnecteu-lo de la bateria i guardeu-lo en un lloc fresc i sec.

8. Solució De Problemes

If the inverter is not functioning correctly, refer to the following common issues and solutions:

9. Especificacions

Image 9.1: The inverter with its physical dimensions (length, width, height) indicated.

10. Garantia i Suport

For information regarding product warranty, returns, or technical support, please refer to the documentation provided at the time of purchase or contact GoWISE Power customer service directly. Extended protection plans may be available for purchase separately.