TURBOSOUND iQ15

Manual d'instruccions de l'altaveu amplificat Turbosound iQ15

Model: iQ15 | Marca: TURBOSONS

1. Introducció

The Turbosound iQ15 is a high-performance, 2500 Watt, 2-way 15-inch powered loudspeaker designed for portable PA and fixed installation applications. It incorporates advanced Klark Teknik DSP technology, speaker modeling, and ULTRANET networking capabilities to provide exceptional sound quality and system control.

Davant view of the Turbosound iQ15 powered loudspeaker

Figura 1: Frontal view of the Turbosound iQ15 powered loudspeaker. This image shows the speaker's protective grille and the Turbosound logo at the bottom.

Característiques principals:

  • Altaveu de 2 vies de gamma completa per a aplicacions de PA portàtils i instal·lacions.
  • 2,500 watts de potència amb tecnologia Klark Teknik Classe D.
  • Klark Teknik Digital Signal Processing (DSP) for total system control.
  • Speaker modelling includes accurate models of industry standard speakers.
  • SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement.

2. Instruccions de seguretat

Before operating your iQ15 loudspeaker, please read and understand all safety instructions. Retain these instructions for future reference.

  • Seguretat elèctrica: Always connect the loudspeaker to a grounded power outlet. Do not expose the unit to rain or moisture. Do not open the enclosure; there are no user-serviceable parts inside.
  • Col·locació: Ensure the loudspeaker is placed on a stable, level surface or securely mounted using appropriate hardware. Avoid placing it near heat sources or in direct sunlight.
  • Protecció auditiva: This product is capable of producing high sound pressure levels. Prolonged exposure to high SPLs can cause permanent hearing damage. Use hearing protection when operating at high volumes.
  • Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat. No bloquegeu les obertures de ventilació.
  • Neteja: Desconnecteu l'aparell de la xarxa elèctrica abans de netejar-lo. Feu servir només un drap sec.

3. Desembalatge i inspecció inicial

Upon receiving your Turbosound iQ15 loudspeaker, carefully unpack it and inspect for any signs of damage that may have occurred during transit. If damage is found, notify your dealer immediately.

Components inclosos:

  • 1 x Turbosound iQ15 2500W 2-Way 15" Speaker
  • Power Cable (region specific)
  • Guia d'inici ràpid (no inclosa en aquest manual)

4. Configuració i connexions

Proper setup is crucial for optimal performance and safety of your iQ15 loudspeaker.

4.1 Col·locació física

The iQ15 can be used as a floor monitor, pole-mounted, or flown. Ensure the speaker is stable and secure in its chosen position.

lateral view of the Turbosound iQ15 loudspeaker showing the integrated handle

Figura 2: lateral view of the Turbosound iQ15, highlighting the integrated handle for easy transport and positioning.

4.2 Connexió d'alimentació

  1. Ensure the loudspeaker's power switch is in the OFF position.
  2. Connect the supplied power cable to the AC input on the rear panel of the iQ15.
  3. Plug the other end of the power cable into a suitable grounded electrical outlet. The iQ15 operates on Corded Electric power.

4.3 Connexions d'entrada d'àudio

The iQ15 features XLR connectivity for audio input. Connect your audio source (mixer, instrument, etc.) to the XLR input on the rear panel.

  • Use high-quality balanced XLR cables for optimal signal integrity.
  • Assegureu-vos que totes les connexions estiguin segures abans d'encendre el sistema.

5. Funcionament

The Turbosound iQ15 incorporates advanced Klark Teknik DSP technology for comprehensive control over its audio characteristics.

5.1 Engegada/apagada

  1. Before powering on, ensure all volume controls on the iQ15 and connected audio sources are set to minimum.
  2. Flip the power switch to the ON position. The power indicator LED will illuminate.
  3. Gradually increase the volume to the desired listening level.
  4. To power off, reduce volume to minimum, then flip the power switch to the OFF position.

5.2 Control DSP de Klark Teknik

The integrated Klark Teknik DSP provides access to various settings, including:

  • Modelatge de parlants: Select from accurate models of industry-standard speakers to emulate their sonic characteristics. Refer to the full user manual (not this document) for a list of available models and their applications.
  • Control de contorns espacials (SCC): This feature allows you to compensate the frequency response based on the physical placement of the speaker (e.g., wall-mounted, corner, free-standing). Adjust SCC settings to optimize sound clarity and balance in different environments.
  • ULTRANET Networking: The iQ15 supports ULTRANET, allowing for digital audio networking and remote control with compatible devices. Consult the ULTRANET documentation for detailed setup and operation.

Access and adjust these settings via the rear panel display and controls. Detailed navigation instructions are typically found in the comprehensive product manual.

6. Manteniment

Regular maintenance ensures the longevity and optimal performance of your Turbosound iQ15 loudspeaker.

  • Neteja: Disconnect the speaker from power before cleaning. Use a soft, dry, lint-free cloth to wipe down the exterior. Do not use abrasive cleaners, solvents, or waxes.
  • Neteja de reixes: The front grille can be gently vacuumed to remove dust and debris.
  • Emmagatzematge: When not in use for extended periods, store the loudspeaker in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
  • Inspecció: Periodically check cables and connections for wear or damage.

7. Solució De Problemes

This section addresses common issues you might encounter with your iQ15 loudspeaker. For more complex problems, contact customer support.

ProblemaCausa possibleSolució
Sense poderPower cable disconnected; outlet not working; power switch off.Comproveu la connexió del cable d'alimentació; proveu la presa de corrent amb un altre dispositiu; assegureu-vos que l'interruptor d'alimentació estigui encès.
Sense sortida de soInput cable disconnected/faulty; volume too low; incorrect DSP settings; source device issue.Check XLR input cable; increase volume on speaker and source; verify DSP input/output settings; test source device.
So distorsionatInput signal too high (clipping); speaker overloaded; faulty cable.Reduce input level from source; reduce speaker volume; check cables for damage.
Soroll de brunzit o brunzitBucle de terra; cable defectuós; interferències d'altres aparells electrònics.Ensure proper grounding; try different cables; move speaker away from other electronics.

8. Especificacions

Detailed technical specifications for the Turbosound iQ15 powered loudspeaker.

Dimensions of the Turbosound iQ15 loudspeaker: 10.92 inches height, 6.91 inches width, 5.85 inches depth

Figure 3: This image illustrates the dimensions of the Turbosound iQ15 loudspeaker, indicating a height of 10.92 inches, a width of 6.91 inches, and a depth of 5.85 inches.

CaracterísticaDetall
Nom del modeliQ15
Tipus d'altaveu2-Way Full Range Loudspeaker
Mida de l'altaveu15 polzades (diàmetre del woofer)
Potència de sortida màxima2500 watts
Tecnologia de connectivitatXLR
Font d'alimentacióElèctric amb cable
Dimensions del producte (P x A x A)6.98 "P x 5.91" W x 11.02" H
Pes de l'article23.1 lliures
ColorNegre
FabricantMusic Tribe EUA
UPC748252143945
Tipus de muntatgeAutònom
Tipus de garantiaLimitat

9. Garantia i Suport

Your Turbosound iQ15 loudspeaker comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Turbosound weblloc.

Atenció al client:

For technical assistance, service, or warranty claims, please contact Music Tribe US, the manufacturer of Turbosound products.

  • Fabricant: Music Tribe EUA
  • Assistència en línia: Visita el TURBOSOUND Store on Amazon or the official Turbosound weblloc web amb recursos de suport, preguntes freqüents i informació de contacte.

Documents relacionats - iQ15

Preview Guia d'inici ràpid de la sèrie Turbosound iQ: altaveus i subwoofers amplificats
Guia completa d'inici ràpid per a altaveus i subwoofers amplificats de la sèrie Turbosound iQ, que detalla la configuració, els controls, la xarxa, el muntatge, les característiques DSP i les especificacions tècniques.
Preview Altaveus i subwoofers autoamplificats de la sèrie Turbosound iQ: Guia d'inici ràpid
Comença ràpidament amb els altaveus i subwoofers amplificats de la sèrie iQ de Turbosound. Aquesta guia cobreix la seguretat, els controls, les funcions DSP, la xarxa, el muntatge i les especificacions tècniques de models com l'iQ8, iQ10, iQ12, iQ15, iQ15B i iQ18B, amb KLARK TEKNIK DSP i ULTRANET.
Preview Turbosound iQ Series Powered Loudspeakers - Quick Start Guide
Comprehensive Quick Start Guide for Turbosound iQ Series powered loudspeakers and subwoofers, covering safety, setup, controls, networking, DSP, mounting, and technical specifications.
Preview Altaveus i subwoofers autoamplificats de la sèrie Turbosound iQ: guia d'inici ràpid
Aquest document proporciona una guia d'inici ràpid per als altaveus i subwoofers amplificats de la sèrie Turbosound iQ. Cobreix instruccions de seguretat essencials, més informacióview de controls, capacitats de xarxa (USB i ULTRANET), opcions de muntatge i fixació, especificacions tècniques i estructura del menú DSP.
Preview Sèrie S de Turbosound TFM-AN/TFX-ANtagGuia d'inici ràpid dels monitors electrònics
Aquest document proporciona una guia d'inici ràpid per a les sèries Turbosound TFM-AN/TFX-AN.tagmonitors electrònics, inclosos TFM122M-AN, TFM152M-AN, TFX122M-AN i TFX152M-AN. Cobreix instruccions de seguretat importants, informació sobre el producteview, controls i capacitats de xarxa.
Preview Guia d'inici ràpid de l'altaveu amplificat Turbosound sèrie iX
Guia d'inici ràpid per a l'altaveu amplificat de 2 vies Turbosound iX Series de 1000 watts, amb tecnologia DSP Klark Teknik, control remot mitjançant iPhone/iPad i transmissió d'àudio Bluetooth. Inclou la configuració, els controls, el menú DSP, la connectivitat i les especificacions.