Introducció
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Invicta S1 Rally Analog Watch, Model 20218. This timepiece features a 51 mm ion-plated stainless steel case, a flexible polyurethane strap, 100-meter water resistance, and a two-subdial chronograph function. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
Imatge: Frontal view of the Invicta S1 Rally Analog Watch, Model 20218, showcasing its grey dial, chronograph subdials, and black and red strap accents.
Configuració
Establiment de l'hora
- Estireu la corona cap a la posició 2. La segona mà s'aturarà.
- Gireu la corona per ajustar les agulles de les hores i els minuts a l'hora desitjada.
- Empenyeu la corona de nou a la posició 0 (posició de funcionament normal). La maneta dels segons reprendrà el moviment.
Establiment de la data
- Estireu la corona cap a la posició 1.
- Turn the crown clockwise to set the date. Adjust the date to the day before the current date.
- Estireu la corona cap a la posició 2.
- Turn the crown to advance the hour hand past 12 o'clock until the date changes to the current date. Continue turning to set the correct time (AM/PM).
- Torneu a empènyer la corona a la posició 0.
Chronograph Reset to Zero Position
If the chronograph hands (second, minute) are not at the zero position after resetting, they can be adjusted as follows:
- Estireu la corona cap a la posició 2.
- Press button A (top pusher) repeatedly to advance the chronograph second hand to the zero position.
- Press button B (bottom pusher) repeatedly to advance the chronograph minute hand to the zero position.
- Once all chronograph hands are at zero, push the crown back into position 0.
Funcionament
Ús del cronògraf
The chronograph function allows for precise timing of events up to 60 minutes.
- Inici/Parada: Press button A (top pusher) to start the chronograph. Press button A again to stop it.
- Restablir: While the chronograph is stopped, press button B (bottom pusher) to reset all chronograph hands to the zero position.
Ús del taquímetre
The tachymeter scale on the bezel can be used to measure speed over a known distance (e.g., 1 kilometer or 1 mile) or to measure production per hour.
- To measure speed: Start the chronograph at the beginning of the measured mile/kilometer. When you reach the end of the mile/kilometer, stop the chronograph. The number indicated by the chronograph second hand on the tachymeter scale is the average speed in units per hour.
- To measure production: Start the chronograph when you begin a task. When one unit of work is completed, stop the chronograph. The number indicated by the chronograph second hand on the tachymeter scale is the number of units produced per hour.
Image: The Invicta S1 Rally Analog Watch, Model 20218, displayed on a wrist, illustrating its size and fit.
Manteniment
Resistència a l'aigua
Your Invicta S1 Rally watch is water-resistant up to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling, but it is no recommended for scuba diving. Always ensure the crown is fully pushed in before exposing the watch to water. Do not operate the crown or pushers while the watch is wet or submerged.
Neteja
To maintain the appearance of your watch, wipe the case and strap with a soft, damp cloth. For the polyurethane strap, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch's finish or crystal.
Canvi de bateria
This watch is powered by a product-specific quartz battery. When the battery needs replacement, it is recommended to take your watch to an authorized Invicta service center or a reputable watchmaker to ensure proper battery installation and maintenance of water resistance.
Flame Fusion Crystal Care
The watch features a Flame Fusion Crystal, known for its scratch resistance. While durable, avoid direct impact and abrasive contact to prevent damage. Clean with a soft, lint-free cloth.
Resolució de problemes
- El rellotge no funciona: Comproveu si la corona està completament premuda. Si el rellotge encara no funciona, potser cal substituir la pila.
- Hora/data incorrecta: Refer to the "Setting the Time" and "Setting the Date" sections to re-adjust. Ensure the crown is securely pushed in after setting.
- Les agulles del cronògraf no es reinicien a zero: Follow the "Chronograph Reset to Zero Position" instructions in the Setup section.
- Aigua dins del rellotge: If condensation or water appears inside the watch, immediately take it to an authorized service center. This indicates a breach in water resistance.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 20218 |
| Marca | Invicta |
| Tipus de moviment | Quars |
| Diàmetre de la caixa | 51 Mil·límetres |
| Material de la caixa | Ion Plated Stainless Steel |
| Tipus de cristall | Flame Fusion Crystal |
| Tipus de material de la banda | Plastic (Polyurethane) |
| Color de banda | Negre |
| Profunditat de resistència a l'aigua | 100 metres (330 peus) |
| Funcions de cronògraf | 60 Second and 60 Minute Subdials |
| Visualització de la data | Date Window at 3:00 |
| Característiques especials | Luminous hands/markers, Tachymeter |
| Pes de l'article | 136 g |
| Bateries | 1 bateria específica del producte (inclosa) |
Image: Visual guide illustrating various watch case diameters for size comparison, including the 50-54mm range relevant to this watch.
Garantia i Suport
Your Invicta S1 Rally Analog Watch, Model 20218, comes with a manufacturer's warranty. For specific warranty details, claims, or technical support, please contact the seller of record or visit the official Invicta weblloc web. Conserveu el comprovant de compra per validar la garantia.
Podeu trobar més informació i dades de contacte a Invicta Store on Amazon.
Image: The yellow Invicta branded watch box, indicating original packaging.
