1. Introducció
The Inkbird IDC-S1RH is a high-performance digital preset scale counter designed for precise counting and control in various industrial applications. This device features a compact DIN (48x48mm) size, clear LED displays for both process value (PV) and set value (SV), and user-friendly tactile switches for easy parameter configuration. It supports both NPN and PNP input types and offers SSR and contact outputs, making it versatile for different control systems. The built-in EEPROM ensures data retention for up to 10 years, providing reliable operation.
2. Característiques del producte
- Digital DIN Counter: Standard 48x48mm panel mount design.
- Interval de recompte: 1-9999 with selectable UP/DOWN counting modes.
- Maximum Counting Speed: Up to 5 kcps (kilocounts per second) at a 1:1 rate.
- Preset Scale Range: Configurable from 0.001 to 9.999.
- Retenció de dades: EEPROM stores data for up to 10 years without power.
- Compatibilitat d'entrada: Supports both NPN and PNP input types, switchable.
- Interfície d'usuari: Tactile switches for intuitive setting adjustments.
- Funció de bloqueig de tecles: Evita canvis accidentals a la configuració.
- Visualització: High-visibility LED displays; 9.9mm red LED for Process Value (PV) and 8mm green LED for Set Value (SV).
- Font d'alimentació: AC 100-240V ± 10% 50/60Hz.
- Tipus de sortida: Contact output (AC250V 3A resistive load, ON/NC) and SSR output (DC 12V, Max. 40mA).
- Potència externa: DC 12V/50mA (max.) for sensor use.
3. Informació de seguretat
Please read and understand all instructions before installation and operation. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Assegureu-vos que la font d'alimentació voltage coincideix amb les especificacions del dispositiu.
- Desconnecteu l'alimentació abans de realitzar qualsevol cablejat o manteniment.
- La instal·lació només l'ha de fer personal qualificat.
- Do not operate the device in environments with excessive moisture, dust, corrosive gases, or high temperatures beyond specified limits.
- Avoid strong vibrations or impacts to the device.
- No desmunteu ni modifiqueu el dispositiu.
4. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- 1 x Inkbird IDC-S1RH Digital Counter
- 1 x Connector Plug (for wiring terminals)
- 1 x Manual d'instruccions en anglès
Figura 4.1: Package contents including the IDC-S1RH counter, connector plug, and manual.
5. Producte acabatview i Components
The IDC-S1RH features a clear front panel for display and control, and a rear panel for electrical connections.
Figura 5.1: Davant view of the IDC-S1RH Digital Counter. It displays the Process Value (PV) and Set Value (SV) and includes buttons for 'MD' (Mode), 'RST' (Reset), and arrow keys for value adjustment.
6. Instal·lació i cablejat
6.1 Muntatge en panell
The IDC-S1RH is designed for panel mounting. Create a cutout in your panel with dimensions of 45mm x 45mm (1.77 x 1.77 inches). Insert the counter into the cutout and secure it using the provided mounting brackets.
6.2 Connexions de cablejat
Refer to the wiring diagrams below for proper electrical connections. Ensure all connections are secure and correct before applying power.
Figura 6.1: lateral view showing the wiring diagram for the IDC-S1RH. It details connections for IN, Gate, Reset, +12V, 0V, NC, COM, NO, and Power.
Figura 6.2: posterior view of the IDC-S1RH, illustrating the screw terminal block for electrical connections. Terminals are numbered for easy identification.
Descripcions del terminal:
- IN (Terminal 1): Counting input. Connect your NPN/PNP sensor here.
- Gate (Terminal 2): Gate input for enabling/disabling counting.
- Reset (Terminal 3): External reset input.
- +12V (Terminal 4): 12V DC output (max. 50mA) for powering external sensors.
- 0V (Terminal 5): Ground for external sensor power.
- NC (Terminal 6): Normally Closed contact output.
- COM (Terminal 7): Common terminal for contact output.
- NO (Terminal 8): Normally Open contact output.
- Power (Terminals 9 & 10): AC 100-240V power input.
- SSR Output (Terminals 11 & 12): DC 12V (Max. 40mA) Solid State Relay output.
7. Funcionament
7.1 Encès
After proper wiring, apply power to the device. The display will illuminate, showing the current count (PV) and the set value (SV).
7.2 Adjusting Set Value (SV)
- Premeu el botó MD button briefly to enter the setting mode for the Set Value. The SV display will start flashing.
- Utilitza el Up (
) i Avall () arrow buttons to increase or decrease the flashing digit. - Premeu el botó MD button again to move to the next digit.
- Once the desired SV is set, press and hold the MD button for a few seconds to save the setting and exit the setting mode.
7.3 Resetting the Count
The counter can be reset in three ways:
- Restabliment manual: Premeu el botó RST del tauler frontal.
- External Reset: Apply a signal to the Reset terminal (Terminal 3).
- Power On Reset: The counter can be configured to reset automatically upon power cycling (refer to parameter settings).
7.4 Funció de bloqueig de tecles
To prevent accidental changes to the settings, the key lock function can be activated. Refer to the parameter settings section for instructions on enabling and disabling this feature.
8. Configuració dels paràmetres
The IDC-S1RH has several configurable parameters to adapt to different applications. Accessing and adjusting these parameters typically involves pressing and holding the MD button for an extended period (e.g., 3-5 seconds) to enter the parameter menu. Use the Up/Down arrows to navigate through parameters and adjust their values, and the MD button to confirm and move to the next parameter.
Els paràmetres comuns inclouen:
- Mode de recompte: Select between UP or DOWN counting.
- Tipus d'entrada: Switch between NPN and PNP sensor inputs.
- Preset Scale Factor: Adjust the multiplication factor (0.001 - 9.999) for the input pulses to display the desired unit.
- Mode de sortida: Configure the behavior of the relay and SSR outputs (e.g., momentary, latched).
- Mode de restabliment: Set whether the counter resets on power-up or only via manual/external trigger.
- Tecla de bloqueig: Enable or disable the key lock function.
- Emmagatzematge de dades: Configure if data is stored in EEPROM or not.
For a detailed list of parameters and their specific adjustment procedures, please refer to the comprehensive manual included in the product package.
9. Manteniment
The Inkbird IDC-S1RH is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- Neteja: Netegeu suaument la pantalla iasinNetegeu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Condicions ambientals: Ensure the operating environment remains within the specified temperature and humidity ranges. Avoid exposure to direct sunlight, excessive heat, or extreme cold.
- Comprovacions de connexió: Inspeccioneu periòdicament les connexions del cablejat per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
10. Solució De Problemes
If you encounter issues with your IDC-S1RH counter, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Sense subministrament d'alimentació; cablejat incorrecte; font d'alimentació defectuosa. | Check power connections (Terminals 9 & 10). Verify power source voltage. Assegureu-vos que el cablejat sigui correcte segons el diagrama. |
| Counter is not counting. | Sensor not connected; incorrect sensor type (NPN/PNP); faulty sensor; Gate input active; counting speed too high/low for sensor. | Check sensor wiring to IN (Terminal 1). Verify sensor type setting (NPN/PNP). Ensure Gate input (Terminal 2) is not preventing counting. Test sensor functionality. Adjust counting speed if possible. |
| Output does not activate. | Incorrect output wiring; set value not reached; output mode misconfigured; faulty relay/SSR. | Verify output wiring (Terminals 6, 7, 8 for contact; 11, 12 for SSR). Ensure the count reaches the set value. Check output mode parameters. Test the load connected to the output. |
| La configuració no es pot canviar. | La funció de bloqueig de tecles està activada. | Disable the key lock function in the parameter settings. |
| Display shows erratic values. | Electrical noise/interference; loose connections. | Ensure proper grounding. Use shielded cables for sensor inputs if interference is suspected. Check all wiring connections for tightness. |
If the problem persists after attempting these solutions, please contact Inkbird customer support.
11. Especificacions
| Característica | Especificació |
|---|---|
| Fabricant | Inkbird Tech |
| Número de model | IDC-S1RH-110 |
| Tipus de font d'alimentació | Elèctric amb cable |
| Voltage | AC 100-240V ± 10% 50/60Hz |
| Sortida d'alimentació externa | DC 12V / 50mA (max.) for sensors |
| Mostra | PV: 4-digit, 9.9mm red LED; SV: 4-digit, 8mm green LED |
| Interval de recompte | 1-9999 |
| Max Counting Speed | 5 kcps (rate 1:1) |
| Preset Scale Range | 0.001-9.999 |
| Tipus d'entrada | NPN and PNP switchable |
| Sortida de contacte | AC250V 3A (resistive load) ON/NC |
| Sortida SSR | DC 12V (Max. 40mA) |
| Vida útil mecànica | 10,000,000 operations Min. |
| Electronic Lifespan | 100,000 operations Min. |
| Còpia de seguretat de dades | 10 anys (EEPROM) |
| Mètode de restabliment | Power On / External / Manual |
| Mida del tall | 45 mm x 45 mm |
| Temperatura de funcionament | -10 to 55°C (14 to 131°F) (no icing or condensation) |
| Temperatura d'emmagatzematge | -25 to 65°C (-13 to 149°F) (no icing or condensation) |
| Humitat ambiental | 35 - 85% HR |
| Dimensions del paquet | 13.72 x 6.35 x 5.59 cm (5.4 x 2.5 x 2.2 polzades) |
| Pes | 204.11 g (7.2 oz) |
| UPC | 705701587019 |
12. Garantia i Suport
12.1 Informació de la garantia
Inkbird products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Inkbird website. The warranty typically covers defects in materials and workmanship under normal use for a specified period from the date of purchase.
12.2 Atenció al client
If you have any questions, require technical assistance, or need to report an issue with your Inkbird IDC-S1RH Digital Preset Scale Counter, please contact Inkbird customer support through their official website or the contact information provided in your product documentation. When contacting support, please have your product model number (IDC-S1RH) and purchase details ready.
