Utilitech White Touch Lamp Control

1. Producte acabatview

The Utilitech Plug-in Touch Control Dimmer is designed to convert any lamp with a metal socket into a touch-controlled lamp. This device provides three distinct levels of illumination, allowing users to easily adjust lighting from a subtle night light to full brightness. Operation is simplified by merely touching the lamp's metal surface to cycle through light settings or to turn the lamp on and off. It is compatible with incandescent bulbs up to 200 watts and is engineered for straightforward installation.

Utilitech White Touch Lamp Control unit, a small white rectangular device with a two-prong plug on one side and an outlet on the other.

Image 1.1: The Utilitech Plug-in Touch Control Dimmer. This compact white unit plugs directly into a wall outlet and features a receptacle for the lampel cable d'alimentació.

2. Informació de seguretat

Assegureu-vos que lamp control is used with incandescent bulbs only, up to a maximum of 200 watts. Do not exceed the specified wattage.
Aquest dispositiu està pensat només per a ús en interiors. No l'exposeu a la humitat ni a temperatures extremes.
Desendolleu sempre la lamp from the control unit and the control unit from the wall outlet before performing any maintenance or changing bulbs.
No intenteu desmuntar ni modificar la unitat. Encarregueu tot el manteniment a personal qualificat.
Mantenir fora de l'abast dels nens.
Assegureu-vos que lamp you intend to convert has a metal socket for proper touch functionality.

3. Contingut del paquet

1 x Utilitech White Touch Lamp Unitat de control

4. Configuració i instal·lació

Prepareu el Lamp: Assegureu-vos que la vostra lamp has a metal socket. Unplug the lamp de la seva font d'energia.
Connecteu la unitat de control: Plug the Utilitech Touch Lamp Control unit into a standard 120V AC wall outlet.
Connecteu la Lamp: Connecta el teu lamp's power cord into the receptacle on the Utilitech Touch Lamp Unitat de control.
Verify Bulb Type: Confirmeu que la lamp contains an incandescent bulb, not exceeding 200 watts. LED or CFL bulbs may not function correctly or may cause damage.
Prova inicial: Once connected, touch any metal part of the lamp's base or body. The lamp should turn on to its lowest setting.

Nota important: For optimal performance, ensure the lamp's metal components are clean and free of non-conductive coatings or paint where touch contact is intended.

5. Instruccions de funcionament

The Utilitech Touch Lamp Control provides three levels of brightness and an off state, cycled by touching the lamp's metal surface.

To Turn On (Low Brightness): Touch any metal part of the lamp. El joamp will illuminate at its lowest brightness setting (night light).
To Increase Brightness (Medium): Toca la lamp again. The brightness will increase to a medium level.
To Increase Brightness (High): Toca la lamp a third time. The brightness will increase to its highest level (full brightness).
Apagar: Toca la lamp una quarta vegada. El lamp s'apagarà.

The cycle repeats with each subsequent touch: Off → Low → Medium → High → Off.

6. Manteniment

Neteja: Disconnect the unit from the power outlet before cleaning. Wipe the control unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
Substitució de bombetes: Desendolleu sempre la lamp from the control unit and the control unit from the wall outlet before replacing a light bulb. Ensure the replacement bulb is an incandescent type and does not exceed 200 watts.
Emmagatzematge: If storing the unit for an extended period, unplug it from the wall outlet and store it in a cool, dry place.

7. Solució De Problemes

Problema	Causa possible	Solució
Lamp does not turn on or respond to touch.	La unitat no està connectada. Lamp not plugged into unit. Lamp bulb is burnt out or incorrect type. Lamp does not have a metal socket or is coated. Unitat defectuosa.	Ensure unit is securely plugged into a live outlet. Assegureu-vos lamp is securely plugged into the control unit. Replace bulb with a new incandescent bulb (max 200W). Confirmeu lamp has an exposed metal socket. Test with another lamp or outlet. If issue persists, unit may be faulty.
Lamp parpelleja o s'atenua de manera inconsistent.	Incompatible bulb type (e.g., LED, CFL). Connexió fluixa.	Ensure only incandescent bulbs are used. Comproveu que totes les connexions siguin segures.
Lamp stays on or off.	Falla interna.	Unplug the unit for 30 seconds and plug back in to reset. If issue persists, unit may be faulty.

8. Especificacions

Característica	Detall
Marca	Utilitech
Número de model	25991
Color	Blanc
Mètode de control	Toca
Light Source Type Compatibility	Incandescent
Wat màxtage	200 watts
Voltage	120 Volts
Característica especial	Dimmable (3 levels)
Ús interior/exterior	Interior
Tipus de muntatge	Muntatge endollable
Pes de l'article	2.78 unces
Dimensions del paquet	8.66 x 4.92 x 2.6 polzades

9. Garantia i Suport

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official Utilitech website or contact their customer support line. Contact details are typically provided on the product packaging or within the original sales documentation.

	UTILITECH 83691 One-Touch Replacement Remote User Manual User manual for the UTILITECH 83691 One-Touch Replacement Remote. Learn about button functions, battery installation, programming methods like Direct Code Entry and Auto Code Search, troubleshooting, and universal volume control. Includes FCC compliance information.
	Utilitech 7150-12-L Bath Fan Control Switch with Timer - Wall-Mounted LCD Touch Panel Installation and operating instructions for the Utilitech 7150-12-L bath fan control switch. This wall-mounted LCD touch panel allows control of bath fans and lights, featuring a timer and dimming capabilities. Includes product specifications, wiring diagram, safety precautions, and customer support information.
	Manual d'instal·lació i funcionament del ventilador Utilitech 7116-02 amb llum LED il·luminada per la vora Aquest manual proporciona instruccions detallades per a la instal·lació, el funcionament, la cura i la resolució de problemes del ventilador Utilitech 7116-02 amb llum LED il·luminada perimetralment. Inclou les especificacions del producte, el contingut del paquet, informació de seguretat i detalls de la garantia.
	Guia de referència ràpida de la llum de cinta LED Utilitech Una guia de referència ràpida per a la cinta lluminosa LED Utilitech (model LR0005-LED36K60RGBW), que proporciona informació essencial de seguretat, passos de preparació, instruccions d'instal·lació, consells de cura i manteniment, detalls de la garantia i solucions de resolució de problemes per a un ús i una longevitat òptims.
	Guia de l'usuari i informació de seguretat del llum de treball halògen UTILITECH MPL1025-C500K9030 Obteniu instruccions detallades, avisos de seguretat, consells per a la resolució de problemes i informació sobre la garantia del llum de treball halògen UTILITECH (model MPL1025-C500K9030). Apreneu a utilitzar, mantenir i solucionar problemes del vostre llum de treball de manera segura.
	Manual d'usuari i guia de seguretat de l'escalfador de ceràmica UTILITECH BNT-150 Aquest manual complet per a l'escalfador de ceràmica UTILITECH BNT-150 cobreix les característiques del producte, les instruccions de seguretat, la instal·lació, el funcionament i el manteniment per a un rendiment òptim i la seguretat de l'usuari.

Utilitech