1. Introducció
Thank you for choosing the Wetekom Wood Moisture Meter K459. This compact digital device is designed to accurately measure the moisture content in wood. Understanding the moisture level in wood is crucial for various applications, including woodworking, construction, and firewood preparation. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your moisture meter.
2. Informació de seguretat
Please read all safety instructions before using the device. Failure to follow these instructions may result in injury or damage to the device.
- Mantingueu el dispositiu fora de l'abast dels nens.
- The measurement pins are sharp. Handle with care to avoid injury.
- Do not attempt to measure live electrical circuits. This device is for wood moisture measurement only.
- No exposeu el dispositiu a temperatures extremes, llum solar directa ni humitat elevada.
- Traieu les piles si no heu d'utilitzar el dispositiu durant un període prolongat per evitar fuites.
- Eliminar les bateries usades d'acord amb la normativa local.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Wetekom Wood Moisture Meter K459
- Protective cap for measurement pins
- 1.5V LR44 batteries (pre-installed or included separately)
- Manual d'instruccions (aquest document)
4. Producte acabatview
Familiarize yourself with the components of your Wetekom Wood Moisture Meter.
Figura 1: Wetekom Wood Moisture Meter K459 in operation. The image shows the compact device with its blue protective cap removed, revealing the two sharp measurement pins. The digital LCD screen displays a percentage reading, and a blue "ON/SET" button is visible. A hand is holding the device, pressing the pins into a piece of wood.
- Measurement Pins: Two sharp pins located at the top of the device, used to penetrate the wood surface.
- Tapa protectora: Covers the measurement pins when not in use.
- Pantalla LCD: Digital screen showing moisture content percentage.
- ON/SET Button: Powers the device on and off, and may be used for setting (if applicable, though this model is simple).
- Compartiment de la bateria: Located on the back or side (not explicitly shown but standard).
5. Configuració
5.1. Instal·lació de la bateria
Your Wetekom Wood Moisture Meter K459 comes with 1.5V LR44 batteries included. They may be pre-installed or require installation.
- Locate the battery compartment cover (usually on the back or side of the device).
- Open the battery compartment. You may need a small screwdriver for some models.
- Insert the 1.5V LR44 batteries, ensuring correct polarity (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
6. Instruccions de funcionament
6.1. Prendre una mesura
Follow these steps to measure the moisture content of wood:
- Traieu la tapa protectora de les agulles de mesura.
- Press the "ON/SET" button to turn on the device. The LCD display will illuminate.
- Firmly press the measurement pins into the wood surface to the desired depth. Ensure both pins are fully inserted into the wood.
- Read the moisture content percentage directly from the LCD display.
- After taking the measurement, carefully withdraw the pins from the wood.
- Press the "ON/SET" button again to turn off the device, or it may automatically shut off after a period of inactivity to conserve battery.
- Replace the protective cap over the measurement pins for storage.
Figura 2: The digital LCD display showing a moisture reading of "1.6%". The device is held by a hand, with the measurement pins inserted into a wooden surface.
6.2. Interpretació de resultats
El percentatge mostrattage indicates the moisture content of the wood. Ideal moisture levels vary depending on the wood type and its intended use.
- Dry Wood (e.g., for indoor furniture): Typically 6% - 8%
- General Construction Wood: Typically 9% - 14%
- Llenya: Below 20% is generally recommended for efficient burning.
Consult specific guidelines for your project to determine the appropriate moisture content.
7. Manteniment
7.1. Neteja
- Netegeu el dispositiu amb un drap suau i sec.
- No utilitzeu netejadors abrasius ni dissolvents.
- Ensure the measurement pins are clean and free of debris after each use.
7.2. Emmagatzematge
- Always replace the protective cap over the measurement pins before storing.
- Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Traieu les piles si les guardeu durant períodes prolongats per evitar fuites.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s’encén. | Piles gastades o instal·lades incorrectament. | Check battery polarity. Replace batteries with new 1.5V LR44 batteries. |
| Lectures inexactes. | Pins not fully inserted; pins dirty or damaged; measuring wrong material. | Ensure pins are fully inserted. Clean pins. Replace pins if damaged (if replaceable). Ensure you are measuring wood. |
| Display shows "LO" or similar. | Moisture content is below the measurable range. | This indicates very dry wood. The device is functioning correctly. |
| Display shows "HI" or similar. | Moisture content is above the measurable range. | This indicates very wet wood. The device is functioning correctly. |
9. Especificacions
- Model: K459
- Interval de mesura: 6% - 40%
- Resolució: 0.1%
- Dimensions (L x A x A): Aproximadament 8.99 x 5.99 x 3.99 cm (3.54 x 2.36 x 1.57 polzades)
- Pes: Aproximadament 80 grams (2.82 unces)
- Font d'alimentació: 1.5V LR44 batteries (or equivalent)
10. Garantia i Suport
For warranty information or technical support, please refer to the purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.
