Manual d'usuari de l'interruptor de bany comunicant SDC CB401-AU

Producte acabatview

The SDC CB401-AU is a communicating bath push switch designed for secure access control in shared bathroom environments. This stainless steel switch is compatible with Emlock, Selectric, Electra, and Hi-Tower locking systems. It ensures that both doors of a communicating bathroom must be closed for the lock to engage, enhancing privacy and security. A visual indicator light confirms the locked status.

SDC CB401-AU Communicating Bath Push Switch with red button and text 'BATHROOM LOCK BOTH DOORS MUST BE CLOSED TO LOCK PUSH TO LOCK OR UNLOCK LIGHT ON DOOR LOCKED'

Figure 1: SDC CB401-AU Communicating Bath Push Switch. This image displays the front of the stainless steel switch, featuring a prominent red square push button. Above the button, text reads "BATHROOM LOCK" and "BOTH DOORS MUST BE CLOSED TO LOCK". Below the button, it states "PUSH TO LOCK OR UNLOCK" and "LIGHT ON DOOR LOCKED". The SDC logo is visible at the top.

Configuració i instal·lació

This section provides general guidelines for the installation of the CB401-AU switch. Professional installation is recommended to ensure proper functionality and compliance with local electrical codes.

Llista de verificació prèvia a la instal·lació:

Verify compatibility with your existing Emlock, Selectric, Electra, or Hi-Tower locking system.
Ensure all necessary wiring and power sources are available and meet specifications.
Confirm the mounting location inside the shared bathroom is suitable and accessible.
Gather required tools (e.g., screwdriver, wire strippers, drill).

Instruccions de muntatge:

Apagueu l'alimentació a l'àrea d'instal·lació de l'interruptor.
Carefully remove the existing switch plate, if applicable.
Connect the wiring from the locking system to the appropriate terminals on the CB401-AU switch. Refer to the wiring diagram provided with your specific locking system for correct connections.
Mount the switch securely to the wall box using the provided screws.
Fixeu la placa frontal.
Restore power and test the functionality.

Important: This switch requires both communicating bathroom doors to be closed for the lock to engage. Ensure the associated door sensors and wiring are correctly installed and functioning.

Instruccions de funcionament

The SDC CB401-AU switch provides simple operation for securing a shared bathroom.

Locking the Bathroom:

Ensure both communicating bathroom doors are fully closed.
Press the red push button on the CB401-AU switch.
The integrated light on the CB401-AU switch will illuminate, indicating that the doors are locked.
Verify that both doors are securely locked from the outside.

Unlocking the Bathroom:

Press the red push button on the CB401-AU switch again.
The integrated light will turn off, indicating that the doors are unlocked.
Verify that both doors can be opened.

Nota: If the light does not illuminate when attempting to lock, ensure both doors are completely closed and the system is receiving power.

Manteniment

The SDC CB401-AU switch is designed for durability and requires minimal maintenance.

Neteja: Wipe the stainless steel surface with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or internal components.
Inspecció: Periodically check the switch for any signs of physical damage, loose connections, or unusual operation.
Prova de funcionalitat: Regularly test the locking and unlocking function to ensure proper operation.

Do not attempt to disassemble the switch. Refer all internal repairs to qualified service personnel.

Resolució de problemes

Problema	Causa possible	Solució
Switch does not lock doors.	Doors not fully closed. Sense energia al sistema. Problema de cablejat. Mecanisme de bloqueig defectuós.	Ensure both doors are completely closed. Comproveu l'interruptor i la font d'alimentació. Verify all wiring connections are secure (consult professional). Inspect the associated Emlock/bolt lock for proper function.
Light does not illuminate when locked.	Light bulb failure (if applicable). Wiring issue to the indicator light. System not fully engaged.	Contact SDC support for replacement or service. Check wiring connections (consult professional). Ensure doors are fully closed and lock mechanism is engaged.
L'interruptor sembla fluix o inestable.	Els cargols de muntatge estan solts. Instal·lació incorrecta.	Gently tighten mounting screws. Do not overtighten. If issue persists, professional re-installation may be required.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact SDC customer support.

Especificacions

Característica	Detall
Número de model	CB401-AU
Dimensions del producte	2 x 3 x 5 polzades
Pes de l'article	4.8 unces
Material	Acer inoxidable
Mode d'operació	ON-NONE-OFF
Tipus de muntatge	Muntatge de paret
Tipus d'actuador	Pulsador
Classificació de protecció internacional	IP00
Mètode de control	Aplicació (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Protocol de connectivitat	Wi-Fi (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Sistemes compatibles	Emlock, Selectric, Electra, Hi-Tower

Nota: Les especificacions estan subjectes a canvis sense previ avís.

Garantia i Suport

Informació de la garantia:

Specific warranty details for the SDC CB401-AU switch are typically provided with the product packaging or can be obtained directly from SDC. Generally, SDC products come with a limited warranty covering defects in materials and workmanship under normal use.

Conserveu el vostre comprovant de compra per a reclamacions de garantia.

Atenció al client:

For technical assistance, troubleshooting, or warranty inquiries, please contact SDC customer support. Contact information can usually be found on the SDC official weblloc web o dins de la documentació del producte.

When contacting support, please have your product model number (CB401-AU) and purchase date available.

	Serveis de disseny de sistemes d'enginyeria SDC per al control d'accés i sortida Els serveis de disseny de sistemes d'enginyeria de SDC ofereixen solucions completes per al control d'accés i sortida de múltiples portes, amb controladors de la sèrie UR, panys EM, tancaments elèctrics i diagrames detallats de cablejat del sistema per a diverses aplicacions.
	SDC CB Series Communicating Bathroom Switch Installation Instructions Detailed installation instructions for SDC CB Series Communicating Bathroom Switches, including CB400-A, CB400-B, and CB700 models. Covers specifications, wiring, and assembly procedures for door access control.
	Instruccions d'instal·lació del SDC 352 Narrow Line EMLock Guia d'instal·lació completa per al pany electromagnètic de línia estreta SDC 352. Apreneu a instal·lar i cablejar correctament aquest maquinari de control d'accés per a sistemes de 12 V CC o 24 V CC.
	Guia d'instal·lació de l'interruptor de placa polsadora ADA HDPE SDC 482A6RPH/484A6RPH Instruccions d'instal·lació per als interruptors de placa rodona de polsador de HDPE SDC 482A6RPH i 484A6RPH. Aquests botons d'obertura de porta que compleixen amb la normativa ADA presenten una cara blava amb el text blanc "PUSH TO OPEN" i estan dissenyats per a una fàcil instal·lació amb diverses caixes elèctriques.
	SDC 432KLDUR Lockdown Push Switch Installation Instructions Detailed installation instructions for the SDC 432KLDUR Lockdown Push Switch, covering operation, specifications, wiring diagrams, and UL 294 performance ratings. Includes contact information for SDC Security Door Controls.
	Instruccions d'instal·lació de l'interruptor polsador de la sèrie SDC 410/420 Guia d'instal·lació dels interruptors polsadors de la sèrie SDC 410/420, que detalla les especificacions elèctriques, els diagrames de cablejat i les característiques del producte per a sistemes de control d'accés segurs.

SDC CB401-AU