Modine HD75

Manual d'usuari de l'escalfador de gas Modine Hot Dawg

Model: HD75 | Brand: Modine

Introducció

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Modine Hot Dawg Gas Fired Unit Heater, Model HD75. This low-profile, power-vented unit heater is designed for residential or commercial applications, offering 75,000 BTU input and 80% thermal efficiency.

The Modine Hot Dawg heater features a 22 gauge aluminized steel cabinet housing with a corrosion-resistant powder coat finish, a permanently-lubricated motor, adjustable louvers, and a standard finger-proof fan guard for safety. It utilizes a tubular heat exchanger with a tubular in-shot burner for reliable performance.

Informació de seguretat

ADVERTÈNCIA: La instal·lació, l'ajustament, l'alteració, el servei o el manteniment inadequats poden causar danys a la propietat, lesions o la mort. Llegiu atentament les instruccions d'instal·lació, funcionament i manteniment abans d'instal·lar o donar servei a aquest equip.

Instal·lació professional necessària: Aquesta unitat deu be installed by a licensed contractor to ensure compliance with all local codes and safety standards.

Materials perillosos: Transportation and handling of this item are subject to hazardous materials regulations. Exercise caution and follow all applicable guidelines.

Precaucions generals de seguretat:

  • Assegureu-vos que hi hagi una ventilació adequada a la zona d'instal·lació.
  • No emmagatzemeu ni utilitzeu gasolina o altres vapors i líquids inflamables a prop d'aquest o qualsevol altre aparell.
  • Keep the area around the heater clear of combustible materials.
  • Regularly inspect the unit for any signs of damage or malfunction.
  • No bloquegeu les entrades o sortides d'aire.

Configuració i instal·lació

The Modine Hot Dawg heater is designed for easy installation from the ceiling using the two included angle brackets. Its low-profile design allows installation just one inch below the ceiling.

Punts clau d'instal·lació:

  • Instal·lació professional: As stated, installation by a licensed contractor is mandatory.
  • Muntatge: Utilize the provided angle brackets for secure ceiling mounting.
  • Ventilació: The power exhaust system simplifies side-wall or roof venting with a small-diameter vent pipe. Ensure proper venting according to local codes.
  • Connexions elèctriques: The unit allows for field wiring connections and includes knockouts for quick access to gas and electricity. Ensure all electrical work is performed by a qualified electrician and complies with local electrical codes. The unit operates on 120V and draws 2.5 Amps.
  • Connexions de gas: Connect to a propane gas supply. All gas connections must be leak-tested by a licensed professional.
  • Subministrament d'aire: Non-separated heaters draw makeup air from within the building or room. Ensure adequate air supply for combustion.
Modine Hot Dawg Heater with dimensions: 25 inches deep, 27 inches wide, 18 inches high.

Image: Modine Hot Dawg Heater with indicated dimensions (25"D x 27"W x 18"H). This image illustrates the compact size of the unit for installation planning.

Instruccions de funcionament

The Modine Hot Dawg heater is designed for whisper-quiet, vibration-free operation. Once professionally installed and connected to power and fuel, the unit can be operated via its thermostat.

  • Encès: Ensure the main power switch to the unit is in the "ON" position.
  • Control del termòstat: Adjust the thermostat to your desired temperature setting. The heater will automatically cycle on and off to maintain the set temperature.
  • Inici inicial: During the first few cycles, a slight odor may be present as manufacturing oils burn off. This is normal and will dissipate.
  • Tancament: To turn off the heater, set the thermostat to its lowest setting or turn off the main power switch.
Davant view of the Modine Hot Dawg Gas Fired Unit Heater, showing the Modine Hot Dawg logo and the heat exchanger fins.

Imatge: Frontal view of the Modine Hot Dawg Gas Fired Unit Heater. This image shows the overall appearance of the unit, including the brand label and the heat exchanger section.

Manteniment

Regular maintenance ensures the longevity and efficient operation of your Modine Hot Dawg heater. Always disconnect power to the unit before performing any maintenance.

  • Inspecció anual: It is recommended to have the unit inspected annually by a licensed HVAC technician.
  • Neteja: Keep the exterior of the unit clean. Periodically, gently clean the fan blades and heat exchanger fins to remove dust and debris. Use a soft brush or vacuum cleaner.
  • Flux d'aire: Ensure that the area around the heater is free from obstructions to maintain proper airflow.
  • Motor: El motor està lubricat permanentment i no requereix lubricació addicional.
  • Sistema de ventilació: Inspect the vent pipe for any blockages, corrosion, or leaks.

Resolució de problemes

This section provides solutions to common issues. For problems not listed here or if issues persist, contact a licensed HVAC technician.

ProblemaCausa possibleSolució
L'escalfador no s'encén.No power, thermostat set too low, gas supply off, pilot light out (if applicable), safety lockout.Check power supply and circuit breaker. Raise thermostat setting. Ensure gas valve is open. Consult a technician for pilot light or safety lockout issues.
Calor insuficient.Incorrect thermostat setting, blocked airflow, unit too small for space.Increase thermostat setting. Clear any obstructions around the unit. Consult a professional for sizing verification.
Sorolls inusuals.Components solts, obstrucció del ventilador, problema amb el motor.Turn off unit and inspect for loose parts or obstructions. If noise persists, contact a technician.
Odor present.Initial burn-off, gas leak, combustion issue.Initial burn-off is normal. If odor persists or smells like gas, immediately shut off gas supply and contact emergency services/technician.

Especificacions

MarcaModine
Número de modelHD75
Tipus de combustiblePropà
Entrada BTU75,000 BTU
Eficiència tèrmica80%
Voltage120 V
Ampedat2.5 Amps
Dimensions del producte (P x A x A)25" x 27" x 18"
Pes de l'article181 lliures
Tipus de muntatgeSuport de sostre
Ús interior/exteriorInterior
UPC046629531495

Informació de la garantia

Modine provides the following limited warranty for this product:

  • Termocambiador: 10 anys de garantia limitada
  • Totes les altres parts: 1 anys de garantia limitada

Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation provided with your unit or contact Modine customer support.

Atenció al client

For technical assistance, parts, or warranty inquiries, please contact Modine customer support or your licensed installing contractor.

It is recommended to have your model number (HD75) and serial number ready when contacting support.

Documents relacionats - HD75

Preview Escalfadors de gas Modine: HDS, HDC, PTX, BTX - Catàleg i especificacions
Aquest document proporciona detalls complets sobre els calefactors de combustió separada a gas (HDS, HDC) i els calefactors de ventilació de doble potència (PTX, BTX) de Modine. Cobreix les característiques de disseny, les dades de rendiment, els procediments de selecció de la unitat, les dades dimensionals, les especificacions i els accessoris disponibles per a aquestes solucions de climatització.
Preview Manual del propietari de l'escalfador d'unitat de gas Modine Hot Dawg per a ús residencial
Manual del propietari per als calefactors de gas residencials Modine Hot Dawg (models HD, HDB, HDS, HDC). Inclou informació sobre instal·lació, funcionament, seguretat, resolució de problemes i garantia.
Preview Escalfadors d'unitat Modine: característiques, especificacions i dades de rendiment
Guia completa dels calefactors de les sèries Hot Dawg, PDP, BDP i PTP de Modine, amb detalls de les característiques, especificacions tècniques, dades de rendiment, controls elèctrics i de gas i informació dimensional per a aplicacions comercials i industrials.
Preview Modine HD & HDB Gas-Fired Unit Heaters: Installation and Service Manual
Comprehensive installation and service manual for Modine HD and HDB series gas-fired unit heaters. Covers safety, installation, venting, gas connections, electrical, operation, and troubleshooting for commercial and workshop environments.
Preview Manual d'instal·lació i servei dels calefactors de gas amb ventilació elèctrica Modine PDP i BDP
Manual complet d'instal·lació i servei per als calefactors de gas amb ventilació elèctrica Modine PDP i BDP, que cobreix la seguretat, els procediments d'instal·lació, la ventilació, les connexions de gas, l'electricitat, l'arrencada, el manteniment i la resolució de problemes.
Preview Guia de resolució de problemes de les unitats Modine HD Direct Spark
Una guia completa per a la resolució de problemes de les unitats Modine HD Direct Spark, que cobreix problemes operatius comuns, codis d'error i passos de diagnòstic per a un rendiment eficient del sistema de calefacció.