Plumeet Kids Alarm Clock - User Manual

1. Producte acabatview

The Plumeet Kids Alarm Clock is a compact and user-friendly digital alarm clock designed for easy readability and portability. It features a large LCD display, a soft backlight, an ascending alarm sound, and an 8-minute snooze function. Its durable silicone cover provides shock protection, making it suitable for children and travel.

Figura 1: Frontal view of the Plumeet Kids Alarm Clock, showing the large digital LCD display.

Contingut del paquet:

• 1 x Plumeet Digital Alarm Clock
• 1 x Manual d'usuari
• 1 x targeta d'agraïment

2. Configuració

2.1 Instal·lació de la bateria

The clock requires 3 AAA 1.5V batteries (not included). Follow these steps to install them:

1. Localitza la tapa del compartiment de les piles a la part posterior del rellotge.
2. Feu lliscar la tapa cap avall per obrir el compartiment.
3. Introduïu 3 piles AAA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
4. Torneu a col·locar la tapa del compartiment de la bateria lliscant-la cap amunt fins que encaixi al seu lloc.

Figura 2: posterior view of the clock showing the battery compartment with the cover removed.

2.2 Configuració de l'hora

To set the current time on your Plumeet alarm clock:

1. Premeu el botó HORA CONFIGURADA button located on the back of the clock. The hour digits will begin to flash.
2. Premeu el botó HORA button to adjust the hour. Note the AM/PM indicator for 12-hour format.
3. Premeu el botó HORA CONFIGURADA de nou. Els dígits dels minuts començaran a parpellejar.
4. Premeu el botó MINUT per ajustar els minuts.
5. Premeu el botó HORA CONFIGURADA button one more time to confirm the time setting and exit time setting mode.

Figure 3: Diagram illustrating the location of Hour, Minute, and Time Set buttons.

3. Instruccions de funcionament

3.1 Configuració de l'alarma

To set an alarm time:

1. Premeu el botó CONJUNT D'ALARMES button (often labeled "SET" on the side). The alarm hour digits will flash.
2. Premeu el botó HORA per ajustar l’hora de l’alarma.
3. Premeu el botó CONJUNT D'ALARMES de nou. Els dígits dels minuts de l'alarma parpellejaran.
4. Premeu el botó MINUT botó per ajustar els minuts de l'alarma.
5. Premeu el botó CONJUNT D'ALARMES button one more time to confirm the alarm setting.

Figure 4: Location of the Alarm Setting button on the side of the clock.

3.2 Activació/desactivació de l'alarma

To turn the alarm on or off, use the ON/OFF switch/button, typically located on the side or back of the clock. When the alarm is active, an alarm icon (often a bell) will appear on the display.

Figure 5: Location of the Alarm ON/OFF button.

3.3 Snooze Function and Night Light

Quan soni l'alarma, premeu el botó gran SNOOZE-LIGHT button on top of the clock to activate the snooze function. The alarm will pause for approximately 8 minutes and then sound again. This button also activates the soft backlight for about 6 seconds, allowing you to view the time in the dark without disturbing sleep.

Figura 6: superior view highlighting the SNOOZE-LIGHT button.

3.4 Ascending Alarm Sound

The alarm features an ascending beep sound. When the alarm is activated, the beeping sound will gradually increase in volume and speed over 60 seconds, ensuring a gentle yet effective wake-up experience.

Figure 7: Visual representation of the ascending alarm sound feature.

4. Manteniment

4.1 Neteja

To clean your alarm clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the clock in water.

4.2 Substitució de la bateria

Replace the batteries when the display becomes dim or the alarm sound weakens. Always replace all three AAA batteries at the same time with new ones. Dispose of old batteries responsibly according to local regulations.

5. Solució De Problemes

• Clock not turning on or display is blank:

  Ensure batteries are installed correctly with the right polarity. Replace with fresh AAA batteries.
• L'alarma no sona:

  Check if the alarm is set to the correct time. Verify that the alarm ON/OFF switch is in the "ON" position. Ensure batteries are not depleted.

• Backlight is not working:

  The backlight only illuminates for 6 seconds when the SNOOZE-LIGHT button is pressed. If it doesn't light up, check battery levels.

• Time or alarm setting is difficult:

  Refer to sections 2.2 and 3.1 for detailed instructions. Ensure you are pressing the correct buttons in sequence.

6. Especificacions

Figure 8: Product dimensions of the Plumeet Kids Alarm Clock.

7. Garantia i Suport

7.1 Informació de la garantia

For detailed warranty information regarding your Plumeet Kids Alarm Clock, please refer to the warranty card included in your product packaging or your purchase documentation. Warranty terms and conditions may vary by region and retailer.

7.2 Atenció al client

If you encounter any issues or have questions not covered in this manual, please contact Plumeet customer support. Contact details can typically be found on the product packaging, the official Plumeet weblloc web o a través dels canals d'assistència del vostre distribuïdor.