Aqua Control Irrigation Programmer C4099N User Manual

1. Introducció

The Aqua Control C4099N Irrigation Programmer is designed to automate your garden watering system, providing convenience and efficiency. This device allows you to set precise watering frequencies and durations, adapting to the specific needs of your plants and garden. Its robust design ensures reliable performance and ease of use.

Figura 1: Frontal view of the Aqua Control C4099N Irrigation Programmer.

2. Informació de seguretat

• Feu servir sempre piles alcalines. No utilitzeu piles recarregables.
• No intenteu mai recarregar bateries no recarregables.
• Ensure the battery compartment is securely sealed to prevent water ingress.
• The programmer requires a minimum water pressure of 1 bar and can withstand a maximum of 8 bar for proper operation. It can open at 0 bar, making it suitable for water containers.
• Mantenir fora de l'abast dels nens.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Aqua Control C4099N Irrigation Programmer
• Manual d'usuari (aquest document)

Figure 2: The Aqua Control C4099N Irrigation Programmer as packaged.

4. Característiques del producte

The Aqua Control C4099N offers a range of features designed for optimal watering control:

• Materials d'alta qualitat: Constructed for extended product life.
• Internal Ball Mechanism: Ensures reliable water inlet opening and closing.
• Control Panel Cover: Provides enhanced protection from water and elements.
• Waterproof Battery Compartment: Features a bilabial seal to prevent water from entering the internal circuit.
• Funció de retard: Allows delaying the start of watering from 1 to 12 hours.
• Freqüència seleccionable: Options include every 1, 2, 3, 4, 5, 6, 8, 12, 24, 48, 72 hours, or once a week.
• Selectable Duration: Watering times of 1, 2, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes.
• Funcionament manual: Ability to manually open and close the water flow.
• Ergonomic Selector Switches: Designed for easy operation and secure grip, even with wet hands.
• Mecanisme de seguretat: Prevents opening when batteries are depleted.

Figure 3: The programmer with its protective cover open, revealing the control dials.

5. Configuració

5.1 Instal·lació de la bateria

1. Locate the battery compartment on the back of the programmer.
2. Carefully open the waterproof battery compartment cover.
3. Insereix 2 piles alcalines AAA de 1.5 V, assegurant la polaritat correcta (+/-).
4. Securely close the battery compartment cover, ensuring the bilabial seal is properly seated to maintain waterproofing.

5.2 Installation to Tap

1. Screw the top connector of the programmer onto your outdoor tap. Ensure a tight, leak-free connection.
2. Connect your garden hose or irrigation system to the bottom outlet of the programmer.
3. Ensure the tap is fully open to allow sufficient water pressure for the programmer to operate correctly (minimum 1 bar).

Figure 4: The irrigation programmer correctly installed on a garden tap.

6. Instruccions de funcionament

6.1 Configuració de la freqüència de reg

Rotate the left dial, labeled 'Frecuencia' (Frequency), to select how often you want the watering cycle to occur. Options include:

• Every 1, 2, 3, 4, 5, 6, 8, 12, 24, 48, 72 hours
• Once a week (indicated by a clock icon)

6.2 Configuració de la durada del reg

Rotate the right dial, labeled 'Duración' (Duration), to select the length of each watering cycle. Options include:

• 1, 2, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes

6.3 Funció de retard

The programmer features a delay function. After inserting batteries, the programmer takes the exact time as the start time. You can delay the start of the first watering cycle from 1 to 12 hours using the 'Delay' button (if available, or by adjusting the start time through battery insertion).

6.4 Funcionament manual

To manually open or close the water flow, use the designated manual button or lever on the programmer. This allows for immediate watering outside of the programmed schedule.

6.5 Funció de reinici

To reset the programmer, locate the 'Reset' button (often a small pinhole) and press it with a thin object. This will clear all settings and return the unit to its default state.

7. Manteniment

• Neteja: Wipe the exterior of the programmer with a damp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
• Substitució de la bateria: Replace batteries when the low battery indicator illuminates or when the programmer stops functioning as expected. Always use new alkaline batteries.
• Emmagatzematge d'hivern: During freezing temperatures, disconnect the programmer from the tap and store it indoors to prevent damage from ice expansion.

Figure 5: Components of the programmer, including the inlet filter, which should be checked periodically for debris.

8. Solució De Problemes

9. Especificacions

• Número de model: C4099N
• Dimensions: 10 x 10 x 16 cm
• Pes de l'article: 300 grams
• Material: Metal (internal components), Durable Plastic (housing)
• Font d'alimentació: 2 x 1.5V AAA Alkaline Batteries (not included)
• Pressió de funcionament: 1 - 8 bar (opens at 0 bar)
• Opcions de freqüència de reg: 1, 2, 3, 4, 5, 6, 8, 12, 24, 48, 72 hours, or once a week
• Watering Duration Options: 1, 2, 3, 5, 10, 15, 20, 30, 60, 90, 120 minutes
• Fabricant: Altadex
• GTIN: 08426375240995

10. Garantia

The Aqua Control C4099N Irrigation Programmer comes with a 2 anys de garantia des de la data de compra, que cobreix els defectes de fabricació. Conserveu el comprovant de compra per a reclamacions de garantia.

Figure 6: The product highlighting its 2-year warranty and waterproof design.

11. Informació de suport

For technical support, inquiries, or warranty claims, please contact the manufacturer:

• Fabricant: Altadex SA
• Weblloc: www.altadex.com

Figure 7: Product packaging displaying manufacturer and webinformació del lloc.