Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your myTouchSmart 25055 In-Wall Digital Countdown Timer. This device is designed to automate indoor and outdoor lighting, fans, or other devices, offering convenience and energy savings. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Informació important de seguretat
- ADVERTIMENT: Risk of Electric Shock. Installation requires working with 120V AC wiring. Always turn off power at the circuit breaker or fuse box before installation.
- Aquest dispositiu només està dissenyat per a ús interior.
- A neutral wire is OBLIGATORI for proper installation and operation. If you are unsure, consult a qualified electrician.
- Do not exceed the electrical ratings: 120VAC 60 Hz, 15A General/Resistive, 1200W Tungsten, 1200VA Ballast, ½ HP.
- Assegureu-vos que totes les connexions dels cables estiguin segures i correctament aïllades.
- Llegiu totes les instruccions completament abans de començar la instal·lació.
Contingut del paquet
- myTouchSmart 25055 In-Wall Digital Countdown Timer
- Interchangeable White and Light Almond Switch Covers
- Manual d'usuari (aquest document)
Note: A wall plate is not included and must be purchased separately.
Instruccions d'instal·lació
- Apagueu l'alimentació: Locate the circuit breaker or fuse that supplies power to the switch you are replacing. Turn it OFF. Verify power is off by attempting to turn on the light or device controlled by the switch.
- Elimina l'interruptor existent: Traieu amb cura la placa de paret i descargoleu l'interruptor existent de la caixa de connexió. Desconnecteu els cables de l'interruptor antic.
- Identificar els cables: Identify the LINE (hot), LOAD, NEUTRAL, and GROUND wires. A neutral wire is OBLIGATORI for this timer. If you do not have a neutral wire, consult a qualified electrician.
- Connecteu el temporitzador: Connect the wires to the myTouchSmart 25055 timer using the screw terminals as shown in the diagram below. Ensure all connections are tight and secure.
- LINE Wire: Connect to the terminal labeled "Line".
- LOAD Wire: Connect to the terminal labeled "Load".
- NEUTRAL Wire: Connect to the terminal labeled "Neutral".
- GROUND Wire: Connect to the terminal labeled "Ground".
- Muntar el temporitzador: Gently push the wired timer into the wall box. Secure it with the provided screws.
- Instal·leu la placa de paret: Attach your existing or a new wall plate (not included) over the timer.
- Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor automàtic o a la caixa de fusibles.
Figure 1: Wiring Diagram. This image illustrates the correct connection points for the Line, Load, Neutral, and Ground wires on the back of the myTouchSmart 25055 timer module.
The timer includes interchangeable white and light almond switch covers to match your decor. To change the switch cover, carefully pry off the existing cover and snap on the desired color.
Funcionament
Configuració de l’hora actual
- Premeu el botó RELOJ botó per entrar al mode de configuració de l'hora.
- Utilitza el UP (▲) i ABAIX (▼) arrow buttons to adjust the hour and minute. The time will scroll.
- Premeu el botó RELOJ de nou per confirmar i sortir del mode de configuració de l'hora.
Ús de programes predefinits
The myTouchSmart 25055 timer features three preset buttons for common scheduling needs:
- EVENING (5pm-12am): Activates the connected device from 5:00 PM to 12:00 AM.
- MORNING (5am-8am): Activates the connected device from 5:00 AM to 8:00 AM.
- ALL NIGHT (6pm-6am): Activates the connected device from 6:00 PM to 6:00 AM.
To activate a preset program, simply press the corresponding button (e.g., TARDE, MATÍ, ALL NIGHT). The blue LED indicator next to the button will illuminate to show it is active.
Custom Countdown Function
El COMPTE ENRERE button allows you to set a custom countdown timer for up to 24 hours.
- Premeu el botó COMPTE ENRERE button. The display will show "00:00".
- Utilitza el UP (▲) i ABAIX (▼) arrow buttons to set the desired countdown duration (up to 24 hours).
- Premeu el botó COMPTE ENRERE button again to start the countdown. The connected device will turn ON for the set duration and then turn OFF.
Manual ON/OFF Override
You can manually turn the connected device ON or OFF at any time, overriding any active program.
- Premeu el botó ON button to manually turn the device ON.
- Premeu el botó OFF button to manually turn the device OFF.
Figure 2: Simple Setup and Operation. This image highlights the scroll buttons for setting the current time and the preset buttons for activating schedules.
Característiques
- Pantalla digital: Clear digital display for time and countdown settings.
- Programes preestablerts: Three convenient preset programs (Evening, Morning, All Night) and a Custom Countdown.
- Anulació manual: Dedicated ON/OFF buttons for instant manual control.
- Indicadors LED: Blue LED lights indicate active programs.
- Àmplia compatibilitat: Works with LED, CFL, Incandescent, and Halogen bulbs, including dimmable LED and CFL.
- Bateria de seguretat: Maintains settings during power outages.
- Fàcil instal·lació: Screw terminal installation for efficient wiring.
- Opcions estètiques: Includes interchangeable white and light almond switch covers.
Figure 3: Product Applications. This image demonstrates that the timer can control various devices such as indoor/outdoor lights, ceiling fans, and exhaust fans.
Manteniment
- Clean the timer's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- The internal backup battery is designed for long-term use and typically does not require replacement.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Timer does not power on. | No power to the switch box; incorrect wiring; neutral wire not connected. | Check circuit breaker. Verify wiring connections (Line, Load, Neutral, Ground). Ensure neutral wire is connected. |
| Connected device does not turn ON/OFF as scheduled. | Incorrect current time setting; program not activated; device malfunction. | Verify current time is set correctly. Ensure the desired program (Evening, Morning, All Night, Countdown) is active (blue LED). Test the connected device manually. |
| La pantalla està en blanc o parpelleja. | Low power; internal issue. | Ensure stable power supply. If problem persists, turn off power at the breaker for 5 minutes, then restore. If still unresolved, contact customer support. |
| Els botons no responen. | Error temporal de programari; danys físics. | Turn off power at the breaker for 5 minutes, then restore. If still unresponsive, contact customer support. |
Especificacions
- Model: 25055
- Valoració elèctrica: 120 VCA, 60 Hz
- Càrrega màxima: 15A General/Resistive, 1200W Tungsten, 1200VA Ballast, ½ HP
- Dimensions del producte: 2 "P x 4.5" W x 6" H
- Timer Module Dimensions: Approximately 1.75" (4.45cm) width x 4.25" (10.8cm) height
- Material: Plàstic
- Color: White (with interchangeable Light Almond option)
- Certificacions: Llistat UL
- Fil neutre: Obligatori
- Bateria de seguretat: NiMH (internal)
Figure 4: Timer Module Dimensions. This image provides the physical measurements of the timer module for installation reference.
Garantia i Suport
Per obtenir informació sobre la garantia o assistència tècnica, consulteu el lloc web oficial del fabricant. weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
