1. Informació important de seguretat
Read all instructions carefully before installing or using this baseboard heater. Failure to follow these instructions may result in fire, electric shock, or personal injury. Keep this manual for future reference.
- Risc d'incendi: Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater.
- Risc de descàrrega elèctrica: Do not use this heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water. Never immerse the heater in water.
- Sobreescalfament: To prevent possible fire, do not block air intakes or exhaust openings. Do not insert or allow foreign objects to enter any ventilation or exhaust opening.
- Superfícies calentes: This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles if provided when moving this heater.
- Children and Invalids: Cal extremar la precaució quan l'escalfador és utilitzat per o a prop de nens o persones invàlides i sempre que l'escalfador es deixi en funcionament i sense vigilància.
- Font d'alimentació: Always unplug the heater when not in use. Connect to properly grounded outlets only. Ensure the heater is connected to a 240V electrical supply as specified.
- Unitats danyades: No utilitzeu cap escalfador amb un cable o un endoll danyats, o després que l'escalfador funcioni malament, s'hagi caigut o s'hagi danyat de cap manera.
- Gestió de cordons: Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas to prevent tripping.
2. Producte acabatview
The DIMPLEX LC2005W31 is a compact and efficient 500W, 240V baseboard heater designed for indoor use. Its white finish and streamlined design integrate well into various room aesthetics. This model is engineered for quick heat distribution and consistent room temperature control.
Imatge 2.1: Davant view of the DIMPLEX LC2005W31 500W 20-inch white baseboard heater.
Característiques principals:
- Disseny compacte: Approximately 42% shorter than traditional baseboard heaters, making it suitable for smaller spaces.
- Calefacció eficient: Delivers heat approximately 40% faster than conventional models, responding quickly to temperature changes.
- Consistent Temperature: Designed to maintain a stable and comfortable room temperature.
- Acabat durador: Features a specially formulated epoxy/polyester powder coating that is environmentally friendly, resists fading, and abrasion.
- Certificat de seguretat: CSA certified with full-length automatic overheat reset for enhanced safety.
3. Especificacions
| Característica | Detall |
|---|---|
| Marca | DIMPLEX |
| Número de model | LC2005W31 |
| Wattage | 500W |
| Voltage | 240 V |
| Dimensions (L x A x A) | 20" x 2.38" x 6.62" (50.8 cm x 6 cm x 16.8 cm) |
| Color | Blanc |
| Factor de forma | Pedestal (Baseboard) |
| Ús interior/exterior | Interior |
| Tipus de muntatge | Muntatge al terra |
| Cobertura de calefacció | Fins a 300 peus quadrats |
| Tipus de cremador | Radiant |
| Tipus de combustible | Elèctric |
| Certificació | Certificat CSA |
| Pes de l'article | 3 lliures |
| Fabricant | DIMPLEX NORTH AMERICA LTD |
| UPC | 781052063891 |
Imatge 3.1: Diagram showing the dimensions of the DIMPLEX LC2005W31 baseboard heater.
4. Instal·lació (Configuració)
Proper installation is crucial for the safe and efficient operation of your DIMPLEX baseboard heater. This unit is designed for permanent installation and requires a dedicated 240V electrical circuit.
4.1 Comprovacions prèvies a la instal·lació:
- Subministrament elèctric: Ensure a 240V electrical supply is available at the installation location. Consult a qualified electrician if unsure.
- Ubicació: Choose a location on an interior wall, away from curtains, furniture, and other combustible materials. Maintain at least 3 feet (0.9 meters) clearance from the front of the heater.
- Liquidació: Ensure adequate clearance above and below the heater for proper airflow.
- Eines necessàries: You will need basic electrical tools, a screwdriver, and possibly a drill for mounting.
4.2 Instruccions de muntatge:
- Remove End Caps: The heater features easily removable end caps for access during installation. Carefully detach them.
- Posició de l'escalfador: Place the heater against the wall in the desired location. The unit has pre-stamped mounting holes for secure attachment.
- Fixar a la paret: Use appropriate fasteners (not included) to secure the heater to the wall through the pre-stamped mounting holes. Ensure the heater is level and firmly attached.
4.3 Connexió elèctrica:
This heater is designed to be hardwired into your electrical system. It can be connected to a wall unit thermostat or have a thermostat installed on either end of the baseboard heater itself.
- Apagar: ALWAYS turn off power at the main circuit breaker before making any electrical connections.
- Cablejat d'accés: Utilize the knock-out sides to route electrical wiring into the heater's junction box.
- Connecteu el cablejat: Follow the wiring diagram provided with your thermostat or the heater's internal wiring instructions. Connect the 240V supply wires to the heater terminals. Ensure all connections are secure and comply with local electrical codes.
- Install Thermostat (if applicable): If installing a thermostat directly on the heater, follow the thermostat manufacturer's instructions for proper connection to the heater's internal wiring.
- Replace End Caps: Once wiring is complete and secured, replace the end caps.
Nota: Tot el treball elèctric ha de ser realitzat per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
Imatge 4.1: lateral view of the DIMPLEX LC2005W31 baseboard heater, showing its compact profile i possibles punts de muntatge.
5. Funcionament
Once properly installed and connected to power, operating your DIMPLEX baseboard heater is straightforward.
5.1 Initial Startup:
- Restaura l'alimentació: Turn on the power at the main circuit breaker.
- Configuració del termòstat: If using an external or integrated thermostat, set it to the desired temperature. The heater will begin to warm up.
- Olor inicial: It is normal for a slight odor to be present during the first few hours of operation as manufacturing residues burn off. Ensure adequate ventilation during this period.
5.2 Funcionament normal:
- The heater will cycle on and off as needed to maintain the set temperature.
- The automatic overheat reset feature will temporarily shut off the heater if it detects an unsafe operating temperature. The heater will resume operation once it cools down.
6. Manteniment
Regular maintenance ensures the longevity and efficient performance of your heater.
6.1 Neteja:
- Desconnecteu l'alimentació: ALWAYS turn off power at the main circuit breaker and allow the heater to cool completely before cleaning.
- Neteja exterior: Netegeu les superfícies exteriors amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Neteja interior: Periodically, use a vacuum cleaner with a brush attachment to remove dust and lint from the grilles and interior components. Ensure no foreign objects are left inside.
6.2 Emmagatzematge:
Si guardeu l'escalfador durant un període prolongat, assegureu-vos que estigui net i sec. Guardeu-lo en un lloc fresc i sec, preferiblement en el seu embalatge original.
7. Solució De Problemes
If your DIMPLEX baseboard heater is not operating correctly, consult the following troubleshooting guide before contacting customer support.
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. | Sense font d'alimentació. | Check the circuit breaker and ensure it is in the ON position. Verify the electrical connections are secure. |
| El termòstat està massa baix. | Increase the thermostat setting above the current room temperature. | |
| L'escalfador no produeix prou calor. | Room size exceeds heating capacity. | Ensure the heater's coverage (300 sq ft) is appropriate for the room size. |
| Reixetes d'aire bloquejades. | Clear any obstructions from the air intake and exhaust grilles. | |
| L'escalfador s'encén i s'apaga amb freqüència. | S'ha activat la protecció contra el sobreescalfament. | Ensure proper clearance around the heater. Clean any dust or lint from the grilles. The heater will reset automatically once cooled. |
| Olors inusuals durant el funcionament. | Initial burn-off of manufacturing residues. | This is normal during the first few uses. Ensure good ventilation. If odor persists, disconnect power and contact support. |
If the problem persists after attempting these solutions, disconnect power to the heater and contact DIMPLEX customer support or a qualified electrician.
8. Informació de la garantia
DIMPLEX NORTH AMERICA LTD provides the following warranty for the LC2005W31 baseboard heater:
- Element de calefacció: 10 anys de garantia.
- Tota la unitat: 1 anys de garantia en tots els altres components.
This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the DIMPLEX weblloc.
9. Suport i contacte
For technical assistance, replacement parts, or further inquiries regarding your DIMPLEX LC2005W31 baseboard heater, please contact DIMPLEX customer support.
- Fabricant: DIMPLEX NORTH AMERICA LTD
- Weblloc: Refer to the official DIMPLEX weblloc web per a recursos de suport i informació de contacte.
- Assistència professional: For electrical installation or complex issues, it is recommended to consult a qualified and licensed electrician.
