1. Introducció
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TC-TS 2025/1 U Table Saw. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
The Einhell TC-TS 2025/1 U is a powerful table saw designed for precise cutting of wood and similar materials. It features a 2000W motor and a 250mm saw blade, offering a maximum cutting height of 85mm.
2. Instruccions de seguretat
ADVERTÈNCIA: Seguiu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Utilitzeu sempre l'equip de protecció individual (EPI) adequat, com ara ulleres de seguretat, protecció auditiva i una màscara antipols.
- Assegureu-vos que la zona de treball estigui neta, ben il·luminada i lliure d'obstacles.
- Mantenir els nens i els espectadors allunyats de la zona d'operacions.
- No utilitzeu la serra a damp o condicions humides.
- Always disconnect the power supply before making adjustments, changing accessories, or performing maintenance.
- Use the push stick provided when cutting small workpieces.
- Ensure the saw blade is sharp and correctly installed.
- Never reach into the blade area while the saw is running.
3. Components del producte
Familiarize yourself with the main parts of your Einhell TC-TS 2025/1 U Table Saw.
- Taula de serra
- Fulla de serra
- Guàrdia de la fulla
- Parada paral·lela
- Angle Stop
- Height/Angle Adjustment Handwheel
- Interruptor d'encesa/apagada
- Port d'extracció de pols
- Push Stick
- Dempeus
4. Muntatge i muntatge
Follow these steps to assemble and set up your table saw for initial use.
4.1 Muntatge del suport
Carefully unpack all components. Assemble the stand according to the diagrams provided in the separate assembly instructions. Ensure all bolts are securely tightened.
4.2 Installing the Saw Blade
- Ensure the saw is unplugged from the power supply.
- Remove the blade guard if necessary.
- Use the provided wrenches to loosen the blade nut.
- Carefully place the new blade onto the arbor, ensuring the teeth are pointing in the correct direction (usually indicated by an arrow on the blade and saw).
- Tighten the blade nut securely with the wrenches.
- Reinstall the blade guard.
4.3 Connecting Dust Extraction
Connect a suitable dust extraction system to the dust port on the saw to maintain a clean work environment and improve visibility.
5. Instruccions de funcionament
5.1 Adjusting Blade Height and Angle
The blade height and angle can be adjusted using the handwheel located on the front of the saw.
- To adjust blade height: Turn the handwheel to raise or lower the blade.
- To adjust blade angle (bevel cut): Loosen the locking mechanism, tilt the blade to the desired angle (0-45 degrees), and then secure the locking mechanism.
5.2 Using the Parallel Stop and Angle Stop
The parallel stop is used for rip cuts, ensuring a consistent width. The angle stop is used for cross-cuts and miter cuts.
- Parada paral·lela: Position the parallel stop to the desired cutting width and lock it in place using the eccentric clamp.
- Topall d'angle: Insert the angle stop into the T-slot on the table. Adjust it to the required angle and secure it.
5.3 Performing a Cut
- Assegureu-vos que la peça de treball estigui estable i correctament recolzada.
- Adjust the blade height so that the blade teeth are approximately 3-5mm above the workpiece.
- Turn on the saw using the green 'I' button. Allow the blade to reach full speed.
- Slowly and steadily feed the workpiece into the blade, using the parallel stop or angle stop for guidance. Always use the push stick for narrow cuts.
- Once the cut is complete, turn off the saw using the red 'O' button and wait for the blade to stop completely before removing the workpiece or offcuts.
6. Manteniment i Neteja
Un manteniment regular garanteix la longevitat i el funcionament segur de la serra de taula.
6.1 Neteja general
- Desconnecteu sempre l'endoll abans de netejar-lo.
- Remove sawdust and debris from the saw table, blade guard, and motor housing after each use. Use a brush or vacuum cleaner.
- No utilitzeu productes de neteja o dissolvents agressius.
6.2 Cura de la fulla
- Inspect the saw blade regularly for wear, damage, or dullness. Replace damaged or dull blades immediately.
- Netegeu l'acumulació de resina i brea de la fulla amb un netejador de fulles adequat.
6.3 Emmagatzematge
Store the saw in a dry, secure location, out of reach of children. The power cable can be neatly stored using the integrated cable holder.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La serra no arrenca | No power supply; Faulty switch; Overload protection triggered. | Check power connection; Inspect switch; Allow motor to cool down and reset. |
| La fulla s'enganxa a la peça de treball | Dull blade; Incorrect blade height; Workpiece not properly supported; Parallel stop not aligned. | Replace or sharpen blade; Adjust blade height; Ensure workpiece stability; Realign parallel stop. |
| Vibració excessiva | Loose blade; Damaged blade; Loose components. | Check blade tightness; Replace damaged blade; Tighten all fasteners. |
| Mala qualitat de tall | Dull or incorrect blade; Incorrect blade height; Material type. | Use appropriate sharp blade for material; Adjust blade height; Consider material properties. |
8. Especificacions tècniques
- Model: TC-TS 2025/1 U
- Entrada d'alimentació: 2000 W (Max. 1800 W continuous)
- Voltage: 240 V
- Diàmetre de la fulla de serra: 250 mm
- Saw Blade Bore: 30 mm
- Max. Cutting Height at 90°: 85 mm
- Max. Cutting Height at 45°: 65 mm
- Mida de la taula: 640 x 487 mm
- Table Extension (Left/Right): Sí
- Pes: 18.8 kg
- Número de peça del fabricant: 4340540
9. Garantia i Suport
Einhell products are subject to strict quality controls. Should this product nevertheless not function perfectly, please contact the Einhell service department or the dealer where you purchased the device.
For warranty claims, please retain your purchase receipt. Einhell offers an extended warranty on certain products upon online registration within 30 days of purchase. Please visit the official Einhell website for detailed warranty terms and registration information.
Assistència en línia: For further assistance, FAQs, and spare parts, please visit the official Einhell weblloc: www.einhell.com
