Introducció
This manual provides essential instructions for the safe installation, operation, and maintenance of your EGLO Lianello 31" 4-LED Dimmable Track Light, Model 201222A. Please read this manual thoroughly before proceeding with installation or use, and retain it for future reference.
The EGLO Lianello track light features a modern design with adjustable lamp heads, allowing for directed illumination. It incorporates integrated LED technology and is compatible with dimmer switches.
Informació important de seguretat
- Desconnecteu sempre l'alimentació a l'interruptor principal abans de la instal·lació o el manteniment.
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics locals.
- Assegureu-vos que la superfície de muntatge pugui suportar el pes de l'aparell.
- Do not attempt to modify the fixture. Any modifications will void the warranty and may create a safety hazard.
- This fixture is primarily designed for indoor use in areas such as kitchens, hallways, and dining rooms. While some specifications may indicate outdoor suitability, please consult a qualified professional if intended for outdoor environments to ensure compliance with specific outdoor electrical requirements.
- No mireu directament a la font de llum LED.
- Mantingueu els materials d'embalatge lluny dels nens.
Contingut del paquet
Verifiqueu que tots els components siguin presents i no estiguin danyats abans de començar la instal·lació.
- EGLO Lianello 31" 4-LED Dimmable Track Light Fixture (Model 201222A)
- Maquinari de muntatge (cargols, femelles, etc.)
- Manual d'instruccions
Note: Additional tools required for installation (not included): screwdriver, wire strippers, drill, ladder, safety glasses.
Configuració i instal·lació
This fixture is designed for mounting on walls or ceilings. Professional installation is recommended.
Pas 1: prepareu-vos per a la instal·lació
- Apagueu l'alimentació: Localitzeu l'interruptor que controla la ubicació de la lluminària i canvieu-lo a la posició OFF. Verifiqueu que l'alimentació estigui apagada utilitzant un voltimetre.tage provador.
- Desempaquetar el contingut: Traieu amb cura tots els components de l'embalatge.
- Review instruccions: Read through all steps before beginning.
Pas 2: Muntatge de l'aparell
The fixture can be mounted horizontally or vertically. The mounting plate should be secured to a junction box.

Image: The EGLO Lianello track light shown mounted horizontally on a ceiling. This configuration is suitable for general room illumination or highlighting areas below.

Image: The EGLO Lianello track light shown mounted vertically on a wall. This configuration can be used to illuminate wall art or provide accent lighting.
- Fixeu la placa de muntatge: Secure the fixture's mounting plate to the electrical junction box using the provided screws. Ensure it is firmly attached.
- Connexions elèctriques: Connect the fixture's wires to the household electrical wires according to local codes. Typically, connect black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground) using wire nuts.
- Secure fixture: Carefully push the wired connections into the junction box and attach the fixture body to the mounting plate, securing it with the provided screws or fasteners.
Step 3: Adjusting Lamp Caps
The four LED lamp heads are adjustable, allowing you to direct light as needed.

Image: The EGLO Lianello track light installed in a retail environment, demonstrating how the adjustable heads can be angled to spotlight specific items like clothing on mannequins.
- Restaurar l'energia: Once installation is complete and secure, return to the main circuit breaker and switch the power back ON.
- Test fixture: Engegueu l'interruptor de la llum per assegurar-vos que el dispositiu funciona correctament.
- Adjust light direction: Gently pivot and rotate each lamp head to direct the light beam to your desired area. Do not force the heads beyond their natural range of motion.
Instruccions de funcionament
Encesa/apagada
Operate the EGLO Lianello track light using a standard wall switch connected to the fixture's circuit.
Funcionalitat d'atenuació
This fixture is compatible with most standard LED dimmer switches. For optimal performance and to avoid flickering or buzzing, ensure you use a dimmer specifically designed for LED lighting. Consult the dimmer manufacturer's instructions for proper installation and operation.
Manteniment
- Neteja: Always turn off power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry, or slightly damp drap. No utilitzeu netejadors abrasius, dissolvents ni poliments, ja que poden danyar l'acabat.
- LED: The integrated LED light sources are designed for long life and are not user-replaceable. Do not attempt to replace the LEDs.
- Inspecció: Inspeccioneu periòdicament l'aparell per detectar qualsevol signe de danys o connexions soltes. Si trobeu algun problema, desconnecteu l'alimentació i consulteu un electricista qualificat.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha energia a l’aparell. Connexió de cable solta. Interruptor de paret defectuós. | Comproveu l'interruptor. Assegureu-vos que totes les connexions dels cables estiguin ben fixades (amb l'alimentació apagada). Proveu o substituïu l'interruptor de paret. |
| La llum parpelleja o brunzeix. | Interruptor regulador d'intensitat incompatible. Connexió de cable solta. | Ensure an LED-compatible dimmer is used. Comproveu les connexions dels cables (amb l'alimentació apagada). |
| La sortida de llum és baixa. | Ajust del regulador d'intensitat massa baix. | Ajusteu el regulador d'intensitat a una posició més alta. |
If you experience issues not listed here or if troubleshooting steps do not resolve the problem, contact EGLO customer support or a qualified electrician.
Especificacions
| Marca: | EGLO |
| Nom del model: | 201222A |
| Color: | Negre |
| Material: | Alloy Steel (Fixture), Glass (Shade) |
| Estil: | 4-Light Track Head |
| Dimensions del producte (L x A x A): | 31.25" x 5.12" x 5.25" |
| Font d'alimentació: | Elèctric amb cable |
| Tipus de font de llum: | LED integrat |
| Nombre de fonts de llum: | 4 |
| Voltage: | 120 Volts |
| Wattage: | 4.2 Watts (per light source, total 16.8W) |
| Regulable: | Sí (amb regulador d'intensitat LED compatible) |
| Muntatge requerit: | Sí |
| Tipus de muntatge: | Protruding (Wall or Ceiling) |
| Certificacions: | Llistat UL |
| Pes de l'article: | 3.45 lliures |

Image: A diagram illustrating the key dimensions of the EGLO Lianello track light, including its 31.25-inch length.
Garantia i Suport
Informació de la garantia
All products purchased have a 30-day replacement parts policy to ensure a fully working item. All products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped. The warranty covers all of the items and conditions identified in the original manufacturer's warranty. Some of the items specifically not covered by the warranty are loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
Atenció al client
For technical assistance, replacement parts, or warranty claims, please contact EGLO customer support. Refer to the EGLO weblloc web o la documentació de la compra per obtenir informació de contacte actualitzada.
You can visit the official EGLO store for more information: Botiga EGLO a Amazon
About EGLO
EGLO is a leading manufacturer of light fixtures, committed to providing innovative and stylish lighting solutions. The following video offers a glimpse into the EGLO brand and its diverse range of products.
Video: An official EGLO brand video showcasing various lighting products and design concepts. This video provides an overview of the brand's commitment to quality and design in the lighting industry.





