Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Viper 3100VX 1-Way Security System. Please read this manual thoroughly before attempting any installation or operation to ensure proper functionality and safety.
The Viper 3100VX is an entry-level security system designed to protect your vehicle. It utilizes your vehicle's factory horn for alarm output, simplifying installation. The system includes two remote controls for convenient operation.
Contingut del paquet
The image displays the complete Viper 3100VX 1-Way Security System kit, including the main control unit, two remote controls, wiring harnesses, and the product packaging box.
- Viper 3100VX Control Module
- Two (2) 1-Way Remote Controls (Viper 473V)
- Arnès de cablejat
- Stinger Double Guard Shock Sensor
- Indicador LED d'estat
- Interruptor de valet
- Manual d'usuari (aquest document)
Configuració i instal·lació
Professional installation is highly recommended for the Viper 3100VX security system. Improper installation can lead to vehicle damage or system malfunction. This section provides general guidelines; refer to the detailed wiring diagrams included with your product for specific connections.
Main Control Module Placement
The main control module, shown in the image, should be mounted securely inside the vehicle's cabin, away from direct heat or moisture. Choose a location that allows for easy access to wiring but is not easily visible to potential intruders.
Ensure the module is mounted in a location that does not interfere with vehicle operation or safety systems. Avoid placing it near moving parts or areas with excessive vibration.
Connexions de cablejat
The system requires connections to your vehicle's power, ground, ignition, door triggers, and parking lights. The Viper 3100VX is designed to utilize your vehicle's factory horn for alarm output, eliminating the need for an external siren.
- Energia i terra: Connect the main power wire to a constant 12V source and the ground wire to a solid chassis ground point.
- Encesa: Connect to a wire that provides 12V only when the ignition is on.
- Door Triggers: Connect to the vehicle's door pin switches to detect door openings.
- Llums d'estacionament: Connect to the vehicle's parking light circuit for visual confirmation of arm/disarm.
- Starter Kill: The onboard failsafe starter kill feature requires integration with the vehicle's starter circuit to prevent unauthorized engine starting.
Shock Sensor Installation
The Stinger Double Guard Shock Sensor detects impacts to the vehicle. Mount the sensor securely to a solid surface within the vehicle, such as a steering column support or a metal brace under the dashboard. Avoid mounting on plastic panels that may absorb vibrations.
Status LED and Valet Switch
The Status LED, shown in the image, should be mounted in a visible location on the dashboard to deter potential thieves and indicate the system's armed status. It flashes when the system is armed.
The Valet Switch, shown in the image, is used to temporarily bypass the security system for servicing or valet parking. Mount it in a hidden but accessible location within the vehicle.
Instruccions de funcionament
The Viper 3100VX system is operated using the included 1-way remote controls.
Funcions de control remot
The image displays the two 1-way remote controls included with the Viper 3100VX system. Each remote features buttons for arming, disarming, and auxiliary functions.
- Armar el sistema: Premeu el botó Bloqueig button once. The vehicle's parking lights will flash once, and the horn will chirp once (if connected) to confirm arming. The Status LED will begin to flash slowly.
- Desarmament del sistema: Premeu el botó Desbloqueja button once. The vehicle's parking lights will flash twice, and the horn will chirp twice to confirm disarming. The Status LED will turn off.
- Mode de pànic: Manteniu premut el botó Bloqueig or Desbloqueja button for three seconds to activate the panic alarm. The horn will sound continuously, and the parking lights will flash. Press any button on the remote to turn off panic mode.
- Funció auxiliar: El AUX button can be programmed for various functions, such as trunk release or remote start (if an auxiliary module is installed). Refer to your installer for specific auxiliary function programming.
Mode valet
Valet mode allows you to temporarily disable the security features of the system, useful when servicing the vehicle or leaving it with a valet. In valet mode, the system will not arm, but keyless entry functions will still operate.
- To enter Valet Mode: Turn the ignition ON, then press and release the Valet Switch once. The Status LED will light up solid.
- To exit Valet Mode: Turn the ignition ON, then press and release the Valet Switch once. The Status LED will turn off.
Manteniment
The Viper 3100VX security system requires minimal maintenance. Regular checks can ensure optimal performance.
- Bateries de control remot: The remote controls are powered by 2 Nonstandard Battery batteries. If the range decreases or the LED on the remote dims, replace the batteries. Refer to the remote control's specific instructions for battery replacement.
- Comprovació del sistema: Periodically test the system by arming and disarming it, and by gently rocking the vehicle to trigger the shock sensor. Ensure the horn sounds and lights flash as expected.
- Inspecció del cablejat: If you experience any issues, visually inspect the wiring connections for any loose or corroded terminals. It is recommended to have this checked by a professional installer.
- Neteja: Keep the main control module and remote controls clean and free of dust and debris. Use a soft, dry cloth for cleaning.
Resolució de problemes
If you encounter issues with your Viper 3100VX system, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| System does not respond to remote. | Dead remote battery; Remote out of range; System in Valet Mode. | Replace remote battery; Move closer to vehicle (Max Range: 0.25 Miles); Exit Valet Mode. |
| Alarm triggers without apparent reason. | Shock sensor sensitivity too high; Faulty door pin switch; Loose wiring. | Adjust shock sensor sensitivity; Inspect and repair door pin switches; Check all wiring connections. |
| Status LED is solid ON. | El sistema està en mode valet. | Exit Valet Mode by turning ignition ON and pressing the Valet Switch. |
| Vehicle horn does not sound when alarm triggers. | Horn connection issue; Vehicle horn malfunction. | Verify horn wiring connection to the alarm module; Check vehicle's horn functionality independently. |
If the problem persists after attempting these solutions, contact a certified Viper installer or customer support for further assistance.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 3100VX |
| Marca | Escurçó |
| Dimensions del producte | 7 x 3 x 5 polzades |
| Pes de l'article | 14.4 unces |
| Piles necessàries | 2 Nonstandard Battery (for remotes) |
| Característiques especials | Portable, Onboard Failsafe Starter Kill, Stinger Double Guard Shock Sensor, Status LED |
| Connectivitat | Wireless (Remote Control) |
| Dispositius compatibles | Cotxes, camions |
| Interval màxim | 0.25 Miles (approx. 1/4 mile) |
| Noise Level (Horn Output) | 50 dB (utilizes vehicle's factory horn) |
| Remote Controls Included | Yes (Two 1-way remotes) |
Garantia i Suport
Informació de la garantia
Viper products typically come with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty duration and coverage details. Keep your proof of purchase for warranty claims.
Note: The provided product information includes a legal disclaimer from a third-party seller stating they are not affiliated with Viper and offer their own warranty. For official Viper warranty information, consult the manufacturer's documentation.
Atenció al client
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Viper customer support or visit the official Viper website. Professional installation and support are highly recommended for vehicle security systems.
You can visit the official Viper store page on Amazon for more information: Viper Store
